Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
4,359 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,190 part numbers: Motion Control Products
 
  GLEASON
23,538 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,741 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,304 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,611 part numbers: Motor Mounted Brakes
  HUBBELL
16,252 part numbers: Electrical Control Products
  SUPERBOLT
121 part numbers: Fastening Solutions
  TELEMOTIVE
2,456 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
105 part numbers
 

Gemco Direct
Amazon Store

 
5,982 part numbers
 

Gleason Direct
Amazon Store

 
1 part numbers
 

Telemotive Direct
Amazon Store

 
18 part numbers
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Control Relays
 
Motogard - Over-Temperature Protection
 
DESCRIPTION
 
Motogard Over-Temperature Protection Systems provide immediate overheating protection for: motors, equipment enclosures, semiconductor heat sinks, sleeve bearings, and other related machinery. All Motogard systems fully conform to the NEC requirements for integral motor thermal protection. Using Positive Temperature Coefficient (PTC) thermistors embedded in or in contact with the surface, the Motogard system is able to continually sense when the equipment exceeds the pre-selected temperature limits.
 
Motogard systems are recommended for applications requiring high reliability under conditions of heavy duty or severe ambient contamination. Minimum rif interference, absence of arcing, and maintenance-free long life are built into the Motogard systems.
 
Motogard - Brochure
Motogard 115 Installation Instructions
Motogard 120 Installation Instructions
Motogard 135 Installation Instructions
Motogard 150 Installation Instructions
Motogard Installation Manual
 

 

 

Motogard - Over-Temperature Protection
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-115101-2 Ametek Gemco MOTOGARD 9966 Part AME-115101-2 Series 115 Over Temperature Protection System 6 Inputs, 2 Triac Outputs 1 N.O. 1 N.C. Input Rating: 120 VAC + or - 10% Single Phase 50 / 60 Hz Output Rating: 120 / 240 Volts 5 AMP Continuous Automatic Reset NEMA 4 Enclosure 5.5" Wide X 4.25" Long X 3.12" High [Amazon] Dated 1/18 (5LBS) H 4" L 6" W 4" Box 0 $477.00
2 AME-120101 Ametek Gemco MOTOGARD 9966 Part 120101 Series 120 Over Temperature Protection System MOTOGARD Over-Temperature Protection Systems provide immediate overheating protection for: Motors Equipment Enclosures Semiconductor Heatsinks Sleeve Bearings and other related machinery fully conform to the NEC requirements for integral motor thermal protection Using Positive Temperature Coefficient (PTC) Thermistors embedded in or in contact with the surface, the MOTOGARD system is able to continually sense when the equipment exceeds the pre-selected temperature limits. Thermistors are NOT included Dated 1/18 (1LB) H 4" L 8" W 4" Box 4 $306.00
3 AME-135101 Ametek Gemco MOTOGARD 9966. Series 135 Over Temperature Protection System Dated 1/18 - 0 $610.00
4 AME-150101 Ametek Gemco MOTOGARD 9966 Series 150 Over Temperature Protection System Provide Immediate Overheating Protection for: Motors Equipment Enclosures Semiconductor Heatsinks Sleeve Bearings and other related machinery For use with PTC Thermistors embedded in or in contact with the monitored surface 1 Input, Form C Relay Output 2 Triac Outputs 1-N.O. 1 N.C. Input Rating: 120 VAC + or - 10% Single Phase 50 / 60 Hz Output Rating: 120 VAC for Size 5 Contactor Coil Reset is Automatic Enclosure is 3.25" Wide X 2.25" Long X 2.50" High Potted in a Polyester Case Conforms with NEC Requirements for Integral Motor Thermal Protection [Amazon] 1/18 (1LB) H 4" L 6" W 5" Box 1 $242.00
Thermistors
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-104A022-4-44-T8155 Ametek Gemco Thermistor. Spring Loaded Probe Thermistor. 4 Inch Length, 44 Inch Lead - 0 $202.00
2 AME-T8060 Ametek Gemco Thermistor 60 C 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 60 C + or - 5 Degrees 140 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Gray Leads - 0 $22.00
3 AME-T8070 Ametek Gemco Thermistor 70 C 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 70 C + or - 5 Degrees 158 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Brown Leads - 0 $22.00
4 AME-T8075 Ametek Gemco Thermistors series 9967 BASIC Thermistor For MOTOGARD Controllers Designed for use with Positive Temperature Coefficient Thermistors 75 Degree C Switches @ + or - 5 % Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity # 22 - 26 Teflon Insulated Leads 6 Inch Wire Leads (1LBS) H 3.00" L 4.00" W 3.00" [Amazon] 2 $22.00
5 AME-T8080 Ametek Gemco Thermistor 80 C 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 80 C + or - 5 Degrees 176 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & White Leads - 0 $22.00
6 AME-T8085 Ametek Gemco Thermistors. 9967 BASIC Thermistor. MOTOGARD Controllers are designed for use with Positive Temperature Coefficient Thermistors. 155 Degree C. Switches @ + or - 5 %. Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity# 22 - 26 Teflon Insulated Leads. Specify desired length of the leads. 6 Inch Minimum (<1LB) - 0 $22.00
7 AME-T8090 Ametek Gemco Thermistor 90 C 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 90 C + or - 5 Degrees 194 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Green & Green Leads [Amazon] Dated 1/8 (1LBS) H 4" L 5" W 4" Box 4 $22.00
8 AME-T8095 Ametek Gemco Thermistors Part T8095 Series 9967 BASIC Thermistor For MOTOGARD Controllers Designed for use with Positive Temperature Coefficient Thermistors 95 Degree C Switches @ + or - 5% Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity # 22 - 26 Teflon Insulated Leads 6 Inch Wire Leads [Amazon] Dated 1/18 (1LBS) H 4" L 5" W 4" Box 2 $22.00
9 AME-T8100 Ametek Gemco Thermistor 100 C Part T8100 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 100 C + or - 5 Degrees 212 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Red & Red Leads Dated 1/18 - 0 $22.00
10 AME-T8105 Ametek Gemco Thermistors Part T8105 9967 BASIC Thermistor. MOTOGARD Controllers are designed for use with Positive Temperature Coefficient Thermistors. 105 Degree C. Switches @ + or - 5%. Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity# 22 - 26 Teflon Insulated Leads. Specify desired length of the leads. 6 Inch Minimum [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 1 $22.00
11 AME-T8110 Ametek Gemco Thermistor 110 C Part T8110 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 110 C + or - 5 Degrees 230 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Brown & Brown Leads Dated 1/18 - 0 $22.00
12 AME-T8115 Ametek Gemco Thermistors Series 9967 BASIC Thermistor For MOTOGARD Controllers are designed for use with Positive Temperature Coefficient Thermistors 115 Degree C Switches @ + or - 5 % Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity # 22 - 26 Teflon Insulated Leads 6 Inch Wire Leads [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 2 $22.00
13 AME-T8120 Ametek Gemco Thermistor 120 C Part T8120 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 120 C + or - 5 Degrees 248 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Gray & Gray Leads [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 0 $22.00
14 AME-T8125 Ametek Gemco Thermistors Part T8125 Series 9967 BASIC Thermistor For MOTOGARD Controllers Designed for use with Positive Temperature Coefficient Thermistors 125 Degree C Switches @ + or - 5% Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity # 22 - 26 Teflon Insulated Leads 6 Inch Wire Leads [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 0 $22.00
15 AME-T8130 Ametek Gemco Thermistor 130 C Part T8130 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 130 C + or - 5 Degrees 266 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Blue & Blue Leads [Amazon] (1LB) H 4" L 5" W 4" Box 3 $22.00
16 AME-T8135 Ametek Gemco Thermistors Part T8135 9967 BASIC Thermistor. MOTOGARD Controllers are designed for use with Positive Temperature Coefficient Thermistors. 135 Degree C, 275 Degree F. Switches @ + or - 5%. Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity# 22 - 26 Teflon Insulated Leads. Specify desired length of the leads. 6 Inch Minimum (<1LB) Dated 1/18 - 0 $22.00
17 AME-T8140 Ametek Gemco Thermistor 140 C Part T8140 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 140C + or - 5 Degrees 284 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Blue Leads [Amazon] Dated 1/18 (1LBS) H 4" L 5" W 4" Box 3 $22.00
18 AME-T8145 Ametek Gemco Thermistors Part T8145 Series 9967 BASIC Thermistor For MOTOGARD Controllers Designed for use with Positive Temperature Coefficient Thermistors 145 Degree C Switches @ + or - 5% Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity # 22 - 26 Teflon Insulated Leads 6 Inch Wire Leads [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 0 $22.00
19 AME-T8150 Ametek Gemco Thermistor 150 C Part T8150 9967 Series Thermistors Part AME-T8150 PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 150 C + or - 5 Degree High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty [Amazon] 1/18 (1LB) H 4" L 5" W 4" Box 12 $22.00
20 AME-T8155 Ametek Gemco Thermistors OBSOLETE Series 9967 BASIC Thermistor For MOTOGARD Controllers Designed for use with Positive Temperature Coefficient Thermistors 155 Degree C Switches @ + or - 5% Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity # 22 - 26 Teflon Insulated Leads 6 Inch Wire Leads [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 0 $22.00
21 AME-T8160 Ametek Gemco Thermistor 160 C Part T8160 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 160 C + or - 5 Degree High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 0 $22.00
22 AME-T8165 Ametek Gemco Thermistors Part T8185 OBSOLETE Series 9967 BASIC Thermistor For MOTOGARD Controllers Designed for use with Positive Temperature Coefficient Thermistors 165 Degree C Switches @ + or - 5% Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity # 22 - 26 Teflon Insulated Leads 6 Inch Wire Leads [Amazon] (1LB) H 4" L 5" W 4" Box 1 $22.00
23 AME-T8170 Ametek Gemco Thermistor 170 C Part T8170 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 170C + or - 5 Degrees 338 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Green Leads [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 8 $22.00
24 AME-T8175 Ametek Gemco Thermistors Part T8175 Series 9967 BASIC Thermistor For MOTOGARD Controllers Designed for use with Positive Temperature Coefficient Thermistors 175 Degree C Switches @ + or - 9% Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity # 22 - 26 Teflon Insulated Leads 6 Inch Wire Leads [Amazon] Dated 1/18 (1LB) H 4" L 5" W 4" Box 4 $33.28
25 AME-T8180 Ametek Gemco Thermistor 180 C Part T8180 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 180 C + or - 5 Degrees 356 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Red Leads Dated 1/18 - 0 $22.00
26 AME-T8190 Ametek Gemco Thermistor 190 C Part T8190 9967 Series Thermistors PTC Positive Temperature Control Thermistor Snap Action Response at Rated Temperature 190 C + or - 5 Degrees 374 F + or - 9 Degrees High speed overtemperature sensing with no switch point drift or aging Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Gray Leads Dated 1/18 - 0 $22.00
Secure Online Order
 

 
Secure Online Order
 
14,190 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 

Click to visit our Amazon store
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate
 
Frequently Sold
Replacement Parts
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 RLS
  • 2006 RLS
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
  • ECPT10 Pressure Transducer
  • PST360 Pressure Transducer
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
Catrac Cable & Hose Carrier

Catrac
 
Catrac Cable & Hose Carrier Products
 
JLG Replacement Parts
 
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985