Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
3,087 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,111 part numbers: Motion Control Products
 
  GLEASON
23,199 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,726 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,285 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,504 part numbers: Motor Mounted Brakes
  HUBBELL
16,217 part numbers: Electrical Control Products
  SUPERBOLT
120 part numbers: Fastening Solutions
  TELEMOTIVE
2,423 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
732 part numbers
 

Gemco Direct
Amazon Store

 
5,982 part numbers
 

Gleason Direct
Amazon Store

 
1,040 part numbers
 

Telemotive Direct
Amazon Store

 
19 part numbers
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Linear Displacement Transducers
925 Linear Cable Reel Sensor
 
DESCRIPTION
 
The series 925 Linear Cable Reel Sensor can be used in any linear application up to 1200 inches. The system consists of a heavy-duty spring motor assembly attached to a precision machined cable drum. As the cable is pulled off of the precision drum, the drum rotates a shaft connected to it. The shaft is precisely geared such that the full number of revolutions of the drum is equal to the appropriate number of revolutions required by the chosen sensor. The Series 925 Linear Cable Reel Sensor can be used with our Series 1746 Resolver Input Card and a Series 2120 PLC Transducer Module. The 925 Cable Reel also provides accurate position feedback for linear motion up to 100 feet. Mounting for either resolver, encoder, cam switch or rotary potentiometer.
 
SPECIFICATIONS
 
Stroke Range - Up to 1200 inches (100 ft.) standard
Mechanical Accuracy - 0.05% of active stroke
Speed Range - Variable
Cable Tension - Type A unit 2.5 lbs. to 4.2 lbs. (stroke to 96"), Type A unit 1.25 lbs. to 4.2 lbs. (stroke to 192"), Type B unit 1.6 lbs. to 14.27 lbs., Type C unit .75 lbs. to 16.30 lbs.
Cable Material - .56 (actual) stainless steel aircraft grade
Housing Material - 10 gage cold rolled sheet steel with baked enamel paint finish
Seal - Splash Proof
Temperature Range - Sensor dependent (most encoders and potentiometers are around 0o to 180o F standard, resolvers are typically -50o to 250o F). Check manufacturers specs.
 
925 Cable Reel Sensor Brochure
925 (A1 and A2), Installation and Service Bulletin
925 B and C Style Only, Maintenance Alert
 

 

Sheave Assemblies
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-PSD0102600 Ametek Gemco Sheave Assembly 
Horizontal 
For a Linear Cable Reel 
[1/2017]
- 0 $284.00
2 AME-PSD0102500 Ametek Gemco Sheave 
Vertical Sheave Assembly 
For a 925 Linear Cable Reel 
[1/2017]
- 0 $222.00
Replacement Spring Assembly
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-M0352900 Ametek Gemco Spring 
Part AME-M0352900 
Main Spring Assembly 
For a Linear Cable Reel 
A1 and A2 Style Units 
[Amazon] Dated 1/7 
(2LBS) H 2" L 5" W 4" Box
2 $116.00
2 AME-SD0392200 Ametek Gemco Spring 
Main Spring Assembly 
For a Series 925 Linear Cable Reels 
B and C Style Units 
1 per reel 
Ships in 2 weeks 
1/16 
[1/2017]
- 0 $747.00
Replacement Cable Assembly
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-SD0414600L125 Ametek Gemco Cable Assembly 
For a 925 Series Linear Cable Reel Sensor 
By 125 Inches Long 
Other lengths available, for lengths over 125 inches add .31 / per inch
- 0 $73.55
2 AME-SD0414600L153 Ametek Gemco Cable Assembly 
For a 925 Series Linear Cable Reel Sensor 
By 153 Inches Long 
Other lengths available, for lengths over 153 inches add .31 / per inch
- 2 $82.23
3 AME-SD0414600L192 Ametek Gemco Cable Assembly 
For a 925 Series Linear Cable Reel Sensor 
By 192 Inches Long 
Other lengths available, for lengths over 192 inches add .31 / per inch
- 0 $94.32
4 AME-SD0414600L216 Ametek Gemco Cable Assembly 
For a 925 Series Linear Cable Reel Sensor 
By 216 Inches Long 
Other lengths available, for lengths over 216 inches add .31 / per inch
- 0 $101.76
5 AME-SD0414600L240 Ametek Gemco Cable Assembly 
For a 925 Series Linear Cable Reel Sensor 
By 240 Inches Long 
Other lengths available, for lengths over 240 inches add .31 / per inch
- 0 $109.20
6 AME-SD0414600L369 Ametek Gemco Cable Assembly 
For a 925 Series Linear Cable Reel Sensor 
By 369 Inches Long 
Other lengths available, for lengths over 369 inches add .31 / per inch
- 0 $149.19
7 AME-SD0414600L576 Ametek Gemco Cable Assembly 
For a 925 Series Linear Cable Reel Sensor 
By 576 Inches Long 
Other lengths available, for lengths over 576 inches add .31 / per inch
- 0 $213.36
Resolver Transducer
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-SD0308900 Ametek Gemco Resolver 
Part AME-SD0308900 
Replacement Resolver Assembly 
With Wire Leads Soldered & Potted to the 
7 Pin Amphenol Connector 
For immediate installation 
Resolver W/O Connector is part AME-04535001 
[Amazon] 
(1LB) H 4" L 5" W 4" Box
3 $512.00
2 AME-04535001 Ametek Gemco Resolver 
Replacement Resolver Assembly 
With wire leads but without the 7 Pin Amphenol Connector 
Gemco Output for Gemco Products 
Resolver with the Connector is part SD0308900  
(1LB) H 4" L 5" W 4" Box 
[Amazon]
2 $405.39
 

 

 

 

925 Linear Cable Reel Sensor
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-925-1529 Ametek Gemco Linear Cable Reel Sensor 
The Series 925 is used to monitor a linear or reciprocating 
machine motion 
Modified 925-A1-74-25-S-X 
97 to 192 Inch Stroke Mechanical Capacity 
74 Inch Active Stroke Electronically 
The Single Turn Resolver will make a 350 Degree turn over this length 
25 Inches of Initial Lead in Cable 
Single Turn Resolver 04535001 wired per Special Drawing for Bridgestone / Firestone M10003606 
Flaton Shaft 
4 to 5 Weeks (20LBS) 1/16
- 0 $2,521.00
2 AME-925-1566 Ametek Gemco Linear Cable Reel Sensor 
The Series 925 is used to monitor a linear or reciprocating 
machine motion 
DR to supply BEI Encoder KH25D-SS-2000-ABZC-8830-LED-SM18 for Gemco's installation like 925A1-72-120-E1-X
- 0 $2,266.11
3 AME-925-1623 Ametek Gemco Linear Cable Reel Sensor. Like model 925-A2-78-72-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
78 = 78 Inch Active Stroke 
72 = 72 Inches of Initial Lead In Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options 
Engineer part number and product. Has a gear ratio that allows the 04535001or SD0308900 resolver to turn 1 revolution for every 11 inches of active travel / stroke 
(15LBS)
- 0 $3,165.00
4 AME-925-1675 Ametek Gemco Linear Cable Reel Sensor  
The Series 925 is used to monitor a linear or reciprocating machine motion 
with 60 Inches of Active Stroke with an 18 Inch Lead in Cable and a Jordan Transmitter. 5 to 7 WK 6/7
- 0 $2,787.37
5 AME-925-1738 Ametek Gemco Linear Cable Reel Sensor. Like model Model 925-A1-56-120-S2-X with an AMCI Resolver 
A1 = 97 to 192 Inch Stroke Mechanical Capacity 
56 = 136 Inch Active Stroke Electronically, The single turn resolver will make a 350 degree turn over this length. recommend use of 132 or 138 (6" increments) 
120 = 90 Inches of Initial Lead in Cable 
S2 = Single Turn Resolver. Resolver single is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,163.00
6 AME-925-A1-22-36-S-X Ametek Gemco Linear Cable Reel Sensor 
The Series 925 is used to monitor a linear or reciprocating machine motion 
Model 925-A1-22-36-S-X 
A1 = 9 to 96 Inch Stroke Mechanical Capacity 
22 = 22 Inch Active Stroke Electronically, The single turn resolver will make a 350 degree turn over this length.  
36 = 36 Inches of Initial Lead in Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,489.84
7 AME-925-A1-25-12-P1-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A1-25-12-P1-X 
A1 = 9 to 96 Inch Stroke Mechanical Capacity 
25 = 25 Inch Active Stroke Electronically, The single turn resolver will make a 350 degree turn over this length.  
12 = 12 Inches of Initial Lead in Cable 
P1 = Single Turn Single-turn Potentiometer 
X = No Other options
- 0 $2,426.00
8 AME-925-A1-56-120-S2-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A1-56-120-S2-X 
A1 = 97 to 192 Inch Stroke Mechanical Capacity 
56 = 136 Inch Active Stroke Electronically, The single turn resolver will make a 350 degree turn over this length. recommend use of 132 or 138 (6" increments) 
120 = 90 Inches of Initial Lead in Cable 
S2 = Single Turn Resolver. Resolver single is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,440.88
9 AME-925-A2-136-90-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-136-90-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
136 = 136 Inch Active Stroke Electronically, The single turn resolver will make a 350 degree turn over this length. recommend use of 132 or 138 (6" increments) 
90 = 90 Inches of Initial Lead in Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,663.00
10 AME-925-A2-144-72-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-144-72-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
144 = 144 Inch Active Stroke Electronically, The single turn resolver will turn 350 degrees turn over this length.  
72 = 72 Inches of Initial Lead in Cable 
S = Single Turn Resolver is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,663.00
11 AME-925-A2-150-100-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-150-100-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
150 = 150 Inch Active Stroke Electronically, The single turn resolver will make a 350 degree turn over this length. recommend use of 132 or 138 (6" increments) 
100 = 100 Inches of Initial Lead in Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,671.68
12 AME-925-A2-180-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-180-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
180 = 180 Inch Active Stroke Electronically, The single turn resolver will turn 350 degrees turn over this length 
S = Single Turn Resolver is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,663.00
13 AME-925-A2-192-X-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-192-X-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
192 = 192 Inch Active Stroke Electronically, The single turn resolver will turn 350 degrees turn over this length.  
X = 0 Initial Lead In Cable Required 
S = Single Turn Resolver is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,853.00
14 AME-925-A2-78-72-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-78-72-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
78 = 78 Inch Active Stroke 
72 = 72 Inches of Initial Lead In Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options
- 0 $2,663.00
15 AME-925-A2-97-53-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-97-53-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
53 = 53 Inch Active Stroke Electronically, The single turn resolver will make a 350 degree turn over this length  
90 = 90 Inches of Initial Lead in Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device which is not included  
X = No Other Options
- 0 $2,663.00
16 AME-925-B1-168-72-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-B1-168-72-S-X 
B1 = 193 to 480 Inch Stroke Mechanical Capacity / Single Main Spring 
168 = 168 Inch Active Stroke 
72 = 72 Inches of Initial Lead In Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options
- 0 $5,287.99
17 AME-925-B1-201-108-S-X Ametek Gemco Linear Cable Reel Sensor 
Model 925-B1-201-108-S-X  
B1 = 193 to 480 Inch Stroke / Single Spring 
201 = 201 Inch Active Stroke  
108 = 108 Inches of Initial Cable Lead in 
S = Single Turn Resolver. Resolver signal is to be fed to a converting device, not included  
X = No Other Options
- 0 $5,299.15
18 AME-925-B1-300-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-B1-300-S-X 
B1 = 193 to 480 Inch Stroke Mechanical Capacity / Single Main Spring 
300 = 300 Inch Active Stroke 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options
- 0 $5,287.99
19 AME-925-B2-233-240-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-B2-233-240-S-X 
B2 = 193 to 480 Inch Stroke Mechanical Capacity / Double Main Spring 
233 = 233 Inch Active Stroke 
240 = 240 Inches of Initial Lead In Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options
- 0 $5,778.08
20 AME-925-B2-400-24-S-X Ametek Gemco Linear Cable Reel Sensor. Model 925-B2-400-24-S-X 
B2 = 193 to 480 Inch Stroke Mechanical Capacity / Double Main Spring 
400 = 400 Inch Active Stroke 
24 = 24 Inches of Initial Lead In Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options (125LBS)
- 0 $5,725.99
21 AME-925-C-600-C0-X Ametek Gemco Linear Cable Rreel Sensor model 925-C-600-C0-X 
925 = 925 Series 
C = C Series 481 to 1200 Inches of Stroke 
600 = 600 Inch Stroke Length 
C0 = 4 -20mA Output, Resolution is 1000 points over the stroke length 
X = no other options 
 
- 0 $6,920.99
Secure Online Order
 

 
Secure Online Order
 
14,111 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 

Click to visit our Amazon store
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate
 
Frequently Sold
Replacement Parts
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 Worm Gear RLS
  • 2000 Spur Gear RLS
  • 2000 Heavy Duty RLS
  • 2006 K Type RLS, 2 Circuit
  • 2006 K Type RLS, 4 Circuit
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
  • ECPT10 Pressure Transducer
  • PST360 Pressure Transducer
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
Catrac Cable & Hose Carrier

Catrac
 
Catrac Cable & Hose Carrier Products
 
JLG Replacement Parts
 
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985