Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 16,775 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 8,463 part numbers: Motion Control Products     GLEASON 2,860 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 1,628 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 457 part numbers: Electrical Control Products   HUBBELL 1,429 part numbers: Electrical Control Products   SUPERBOLT 113 part numbers: Fastening Solutions   RENOLD 123 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

GemcoDirect Online Order
 

Database Lookup:     By Part Number By Description
Total 8463 part numbers listed in this database. Shown in 265 pages by 32 items.
Pages:   Prev,   Next,   219  220  221  222  223  224  225  226  227  228  229  230  231  232  233  234  235  236  237  238  239
Part Number	Product Category	Description	Image	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-E010083	Gemco Parts	Ametek Gemco Adj Screw Block TM1035  Part E010083  Old Part 438A217H01  Adjusting Screw Block   For a 10 Inch TM-1035 DC Brake  Item 7, 1 per brake  Ships in 2 Weeks, Peck MI  Dated 01-2024  (5LBS)	-	1	0.00	501.00
AME-E010085	Gemco Parts	Ametek Gemco Spring TM 10"  Part E010085  Old Part 438A411H03  Tension Spring  For a TM-1035 DC Brake  Item 28, 2 per brake, sold each  A Recommended Spare Part   Dated 01-2024  (1LB) H 4" L 5" W 4" Box	-	0	0.00	119.00
AME-E010086	Gemco Parts	Ametek Gemco Tie Rod  Part E010086  For a TM-1035 10 Inch Brake  Item 6, 1 per brake  Old WEST 635C104G03  Dated 01-2024	-	1	0.00	695.00
AME-E010088	Gemco Parts	Ametek Gemco Magnet Travel Equalizer Plate  For a TM-83 & TM-1035 Brake  Dated 01-2024  (1LB)	-	0	0.00	80.00
AME-E010096	Gemco Parts	Ametek Gemco Brake Part CB  Solenoid Guide  Part AME-E010096   For a CB110 or 160 Brake Assembly  Fabricated from Brass not Plastic  (1LB) H 4" L 5" W 4" Box  Use Part No. E007076  Dated 01-2024	-	18	0.00	96.00
AME-E010103	Gemco Parts	Ametek Gemco Solenoid Assembly CB-160  Part E010103  aka E010103002  Old Part 3279B97H05  For a CB-160 10 Inch Diameter Brake  Includes the Plunger & Solenoid Guides  But NOT the COIL  Arcelor 100149630  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (8LBS) H 4" L 5" W 4" Box		0	0.00	913.00
AME-E010106	Gemco Parts	Ametek Gemco Shoe & Lining CB 10"  Part E010106  aka E010106006  Old Part 2254C28G04  Inner Brake Shoe  For a CB-160 10 Inch Electric Brake  Bonded Premium Non-Asbestos Lining Material   Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2025  (15LBS)	-	0	0.00	2,101.71
AME-E010107	Gemco Parts	Ametek Gemco Shoe & Lining CB 10"  Part E010107  aka E010107006  Old Part 254C27G04  Outer Brake Shoe  For a CB-160 10 Inch Electric Brake  Bonded Premium Non-Asbestos Lining Material   Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2025  (15LBS)		0	0.00	2,101.71
AME-E010108	Gemco Parts	Ametek Gemco Lining & Rivet Kit CB160  Part E010108  aka E010108005  Old Part 3279B95G04  For a 10 Inch CB-160 Solenoid Brake  Premium OEM Non-Asbestos Drilled Linings  Qty. 2, with 6 Drilled and Countersunk Holes & 18 Brass Push Pins  Linings for 2 Brake Shoes - 1 Pair  Normally a Stock Item at BPI  Ships from our Stock to 2 Weeks  C. F. for Pricing  Dated 01-2024  (2LBS) H 4" L 8" W 4" Box	-	5	0.00	2,529.80
AME-E010109	Gemco Parts	Ametek Gemco Coil. Series Wound Coil  For a TM-1035 Brake Assembly  39 AMPS per coil continuous duty / 130 FT LB  54 AMPS per coil intermittent duty / 200 Ft LB  Average Resistance .0494 Ohms  2 coils connected in series  Item 26  2 Coils per brake, sold each  aka 635C328G22	-	0	0.00	2,939.76
AME-E01011	Gemco Parts	Ametek Gemco Rod. Adjusting Rod  For a CB-160 10 Inch Brake  1 per brake  Item 17  aka 3279B86G04  Dated 1-2020	-	0	0.00	328.32
AME-E010111	Gemco Parts	Ametek Gemco Coil  Part E010111  Series Wound Coil  For a 10 Inch TM-1035 DC Brake  20.00 AMPS per coil continuous duty @ 130 FT LB  27.5 AMPS per coil intermittent duty @ 200 FT LB  Average Resistance .209 Ohms  Item 26, 2 coils per brake, sold each  Coils are connected in series  aka 635C328G20  Dated 7/18	-	0	0.00	3,306.96
AME-E010112	Gemco Parts	Ametek Gemco Coil  Part E010112  Series Wound Coil  For a 10 Inch TM-1035 DC Brake  Item 26, 2 per brake, sold each  Resistance 0.343 OHMs  21 AMPS per Coil 1/2 Hour Rating  15 AMPS per Coil 1 Hour Rating  Ships in 5 weeks, Peck MI  Dated 7/18	-	0	0.00	3,306.96
AME-E010114	Gemco Parts	Ametek Gemco Lining Kit TM1035  Part E010114  Old Part Old 861C691G17  For a 10 Inch TM-1035 DC Brake  Pair of Premium Non-Asbestos Linings & Fasteners  8 Drilled & Countersunk Holes  With 18 Rivets  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2025  (2LBS) H 6" L 4" W 4" Box		0	0.00	464.00
AME-E010115	Gemco Parts	Ametek Gemco Brake Shoe Arm  Outer Brake Shoe Arm  For a TM-1035 Brake  Item 17, 1 per brake  aka 635C306G01  Dated 01-2024	-	0	0.00	1,172.00
AME-E010116	Gemco Parts	Ametek Gemco Base Assembly  For a TM-1035 DC Brake  Item 18, 1 per brake  aka 635C300G01  C. F. for Pricing  Dated 01-2024	-	0	0.00	Call	N/A
AME-E010117	Gemco Parts	Ametek Gemco Brake Part TM 10 Inch  Inner Brake Shoe Arm with Bushings  For a 10 Inch TM-1035 DC Brake  Item 21, 1 per brake  aka 635C306G02   Dated 01-2024	-	0	0.00	1,211.00
AME-E010118	Gemco Parts	Ametek Gemco Clapper & Arm  For TM-1035 Brake  1 per brake  Item 22  aka 635C317G01  Dated 01-2024	-	0	0.00	2,185.00
AME-E010119	Gemco Parts	Ametek Gemco Clapper Arm  Part E010119  aka E010119004  For a 10 Inch TM-1035 DC Brake  Item 24, 1 per brake  2 Arms - Pair with Bushings  Old WEST 635C308G01  Ships in 6 to 8 Weeks  Dated 01-2024	-	0	0.00	1,172.00
AME-E010145	Gemco Parts	Ametek Gemco Enclosure  NEMA 4 Enclosure  For Gemco Rectifiers E010326 or E010327  (20LBS) H 12.00" L 18.00" W 15.00"	-	0	0.00	540.00
AME-E010165	Gemco Parts	Ametek Gemco Coil  Part E010165  Series Wound Brake Coil  For a 10 Inch TM-1035 DC Brake  75 Amps per Coil 1/2 Hour Rating  55 Amps per Coil 1 Hour Rating  Resistance 0.0262 Ohms per Coil  Item 26, 2 per brake, sold each  Ships in 5 weeks, Peck MI  Dated 7/18  (30LBS)	-	0	0.00	3,306.96
AME-E010193	Gemco Parts	Ametek Gemco Actuating Cylinder  For a Electro-Hydraulic Brakes ETH-8 & ETH-10  2.0" Bore  1" Stroke  1" Rod  #4 Rod End  Dated 01-2024	-	0	0.00	4,495.00
AME-E010237	Gemco Parts	Ametek Gemco Switch Kit to complete a Brake Engagement Circuit on a TM1035 Brake. Includes Switch, Bracket, Hardware & Instructions. Some brake modification is required This single switch can be wired for a normally open or a normally closed circuit allowing this switch to show a engaged or disengaged brake. One or the other not both  Dated 01-2024	-	0	0.00	1,165.00
AME-E010266	Gemco Parts	Ametek Gemco Spring. Main Spring on a ET-10 Brake	-	0	0.00	71.28
AME-E010309	Gemco Parts	Ametek Gemco Tie Rod Assembly for an ET-10 Brake	-	1	0.00	406.08
AME-E010326	Gemco Parts	Ametek Gemco Brake Rectifier NEMA 4   Part E010326  aka E010326002  Brake Rectifier Assembly  For Qty 1, 6 Inch TM-63 through 19 Inch TM-1985 Brake Assembly  A NEMA 4 Enclosure is supplied  16" High x 14 Wide x 8" Deep  The following AC input voltages are supported  380, 440, 550 & 600 Volts  Please specify one voltage at time of order  The panel can be reconnected for the other voltages  An open chassis unit is available at less cost  Normally a Stock Item @ BPI  Ships in 8 Weeks, Peck MI  Dated 01-2024  (54LBS) H 13" L 13" W 13" Box		0	0.00	5,385.00
AME-E010327	Gemco Parts	Ametek Gemco Rectifier  Part E010327  aka E010327002  Rectifier Assembly  For Qty. 1, TM-43 through TM-1985 Brake Assembly  Open chassis design without enclosure  Panel accepts the following AC Input Voltages:  380, 440, 550 or 600 Volt  Please specify one voltage at time of order  Can be reconnected for the other voltages  A NEMA Enclosure is available at additional cost  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks  Dated 01-2024  (38LBS) H 23" L 16" W 13" Box		1	0.00	4,846.00
AME-E010328	Gemco Parts	Ametek Gemco Resistor  Part E010328  ala E010328006  Brake Rectifier Part  1000 OHMS, 100 WATTS, Adjustable  For Brake Rectifiers E010326 & E010327  Item 10, 1 per rectifier  (1LB) H 4" L 8" W 4" Box	-	0	0.00	146.88
AME-E010500	Gemco Parts	Ametek Gemco Brake Wheel 10 Inch  Part E010500  aka E010500999  For the TM-1035 DC Brake Assembly  And ET-10 Thruster Brake  With the Offset Style Hub, Stock Bore  10.02 Inch Brake Wheel Diameter  3.75 Inch Face Width  4.25 Inch Hub Offset  4.25 Inch Hub Length Through Bore  3.75 Inch Hub Diameter  Solid Hub with Bore Center Drilled   2.75 Inch Maximum Recommended Bore  4425 Maximum RPM  Cast from ASTM A 536 Ductile Iron  80-60-03 or 80-55-06  Ships in 4 Weeks, Peck MI  Dated 10-2021  (40LBS) H 6" L 10" W 10" Box	-	0	0.00	2,179.44
AME-E010800	Gemco Parts	Ametek Gemco Brake Wheel 10 Inch  Part E010800  aka E010800999  For the CB-160 AC Brake Assembly  10.00 Inch Brake Wheel Diameter, Stock Bore  4.25 Inch Face Width  4.26 Inch Hub Offset  3.38 Inch Hub Length Through Bore  3.75 Inch Hub Diameter  Solid Hub with Bore Center Drilled   2.25 Inch Maximum Recommended Bore  4425 Maximum RPM  Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06  Ship in 4 Weeks, Peck MI  Dated 10-2021  (40LBS) H 10" L 10" W 10" Box		0	0.00	2,179.44
AME-E010807	Gemco Parts	Ametek Gemco Brake Wheel 10 Inch  For the CB-160 AC Brake Assembly  10.00 Inch Brake Wheel Diameter  4.25 Inch Face Width  With a Finished Bore & Keyway  4425 Maximum RPM  Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06  Part AME-E010807  (40LBS) H 10" L 10" W 10" Box  [Amazon]	-	0	0.00	2,168.47
AME-E011500	Gemco Parts	Ametek Gemco Brake Wheel 11 Inch ET  Part E011500  aka E011500999  11 Inch Diameter  Stock Bore Brake Wheel   For the ET-11 Brake  Dated 10-2021  (73LBS)	-	0	0.00	3,054.24

Prices are subject to change without notice. Last updated: 15-Jul-2025 02:28:16 PM (EST)

Secure Online Order     Secure Online Order   part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.