Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,169 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,411 part numbers: Motion Control Products     GLEASON 18,097 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,226 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 923 part numbers: Electrical Control Products   HUBBELL 8,272 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

GemcoDirect Online Order
 

Database Lookup:     By Part Number By Description
Total 48169 part numbers listed in this database. Shown in 1506 pages by 32 items.
Pages:   Prev,   Next,   376  377  378  379  380  381  382  383  384  385  386  387  388  389  390  391  392  393  394  395  396
Part Number	Product Category	Description	Image	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-8020-0044	Ametek Parts	Ametek Gemco AH/ERC Brake Conversion System, 480 VAC, includes one 8 to 1 Ratio pressure cluster on 70970 control panel, one 3/4 HP 70942 AC Compressor and J073910 tubing installation kit. For use with existing manual hydraulic foot pedal in cab and existing single 18" hydraulic brake	-	0	0.00	10,040.75
AME-8020-0046	Ametek Parts	Ametek Gemco: Brake System: Conversion: AHM/ERC Conversion System. Converts a Type "H" Brake System (without parking) into a Electrically Controlled System. Includes one J070943 Air Compressor 3/4 HP 230 VDC., one J100650 AHM/ERC Control Panel 230 VDC pre-piped and pre-wired, one J073910 Installation Kit which includes tubing, fittings, unions, gaskets and brake fluid. One PSD0180101 Fluid Reservoir Bleeder 230 VDC. Panel has one JC54086 Pressure Cluster for 1 & 2 brake systems. Panel Dim. 33 Inches Wide X 45 Inches High	-	0	0.00	14,125.30
AME-8020-0048	Ametek Parts	Ametek Gemco Brake Conversion System to a Type AHM-Electric Remote Control, 240 to 480 Volt AC  For Wagner / Gemco Type H Braking Systems without the parking brake option / HM. Converts an existing brake system  Most Manually Operated Crane Brake Systems installed prior to January 1970 used 1-1/8 inch diameter actuating cylinders and require between 100 and 400 PSI hydraulic pressure, 30 to 120 LB pedal force, to develop rated torque. Unless data is available to define the required torque for a specific crane, it is recommended that the actual braking to stop a specific crane be observed and recorded on the order for Type AH/H-ERC Conversion System. These pressure readings are especially important when the required braking pedal force is known to be unusually low, Less than 30 LBS   Type A/H-ERC Conversion Systems are generally suitable for use with any hydraulic applied, spring released, single or double brake system without parking and equipped with a fluid reservoir/bleeder.   If the existing Type H system does not include a Fluid Reservoir/Bleeder you must add the optional Bleeder Conversion System at $ 1946   The AHM-ERC Conversion System includes the following components:   One 480 Volt AC 3/4 HP Motor Driven Compressor Assembly J070943  One Prepiped and Prewired Control Panel J070972 with 1, J054086 Pressure Cluster, Panel 27 Inches Wide X 33 Inches High  One Two-Way Hydraulic Check Valve J018377  One Installation Kit including all necessary tubing, fittings, and fluid J073910  Ship in 4 to 5 weeks Dated 1/18  6500 LBS	-	0	0.00	30,882.60
AME-8020-0052	Ametek Parts	Ametek Gemco AH/ARC Conversion System from manually operated Type H systems (without parking) to air over hydraulic. (2 brake system) Includes one 3/4 HP motor driven compressor, one pre-piped, pre-wired control panel, one installation kit including hose, tubing, fittings. 230VDC, 8:1 pressure ratio. Air treadle valve sold separately.	-	0	0.00	9,449.99
AME-802002-0288	Ametek Parts	Ametek Gemco Bridge Brake System, Qty. 4, 10X4 Brakes, Single Station, Type A/H-ARC Complete System less brake wheels. Supply voltage 230 VDC, with 7/8 inch brake actuators and 1X5 ratio A/H pressure cluster for maximum torque of 380 LBS FT per brake	-	0	0.00	21,452.01
AME-8020-0621	Ametek Parts	Ametek Gemco Conversion System for a 10 Inch Hyd System from H To HM  Dated 01-2024	-	0	0.00	9,834.00
AME-8020-0622	Ametek Parts	Ametek Gemco Conversion System, converts an existing Type "H" Brake System to a Type "HM" Hydraulic Brake System which has a Parking Brake. Converts 1, J002929 a 14 X 6 Inch Type H Brake which is not included into a J34635 Type HM Brake. The Conversion System Includes one each of the following: J107206 HM Control Panel, J079462 14 Inch HM Brake Spring Cylinder with a J070899 Cylinder Mounting Kit, J045767 Control Station Switch with Pilot Lamp, J073900 2 Hose, 50 Foot Tubing Kit, 50 Feet Copper Tubing, 2 J01797 Armored Hose Kits, Brackets, Nuts, Gaskets, Bushings, Clamps, Unions, Tube Tee and 1 Galion of Heavy Duty Brake Fluid. A Fluid Reservoir Bleeder is not included though it may be required if the existing systen does not have one  Dated 01-2024	-	0	0.00	10,764.00
AME-8020-1409	Ametek Parts	Ametek Gemco AH/ERC Conversion System for 4 brake system. Includes the following: J070943 Air Compressor 3/4 HP 230VDC, J070986T AH/ERC Control Panel with 2, 8:1 Pressure Clusters & J073910 Tubing Installation Kit. Treadle Valve and fluid reservoir bleeders are not included	-	0	0.00	9,085.36
AME-8020-1418	Ametek Parts	Ametek Gemco Brake System  Part 8020-1418  80201418  10 Inch Hydraulic Type H Brake System  System provides infinitely variable, progressive, brake torque application for smooth controlled braking  0 to 425 LBS / FT of Dynamic Stopping Torque   System Includes:  One J002926 Hydraulic Brake Assembly  One J007905 Brake Actuating Cylinder  One PSD0180102 Fluid Reservoir with Manual Bleeder Valve  One J017616 Control / Master Cylinder with J008219 30 Inch Pedal  One J073901 Brake Installation Kit, which includes:  100 Feet of Hydraulic Tubing, 16 Tube Fittings, 3 Tube Unions, 35 Tube Clamps, 35 Tube Bushings, 2 Armored Hose Frame Brackets, 4 Copper Gaskets, 4 Armored Flexible Hoses, Tube Tee, Bleeder Screw Adapter, Bleeder Screw & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid  A 10 X 4.25 Inch Brake Wheel is not included, ordered separately with a Pilot of Finished Bore  Motor Freight Only  Dated 10-2021  (222LBS)	-	0	0.00	10,733.04
AME-8020-1433	Ametek Parts	Ametek Gemco Conversion System. Type "H" Hydraulic Brake Systems to "HM" Hydraulic Brake System with a Parking Feature. for one 14 X 6 Inch Brake. Includes one each of the following: J023437 Brake Actuator, J045767 Control Station switch with Lamp, J070899 Kit Modifier, J073900 Installation Kit with 50 Ft Copper Tubing, 2 Armored Hoses & Fittings, J079462 14 Inch HM Brake Cylinder, PSD0180101 Fluid Reservoir Bleeder 230 VDC	-	0	0.00	Call	N/A
AME-8020-1440	Ametek Parts	Ametek Gemco AH/ERC Conversion system for use with a single hydraulic brake. Includes 70943 compressor 3/4HP 230VDC, 70984T panel with one 8:1 pressure cluster, 66962 treadle valve installation kit including 107039 treadle valve, 71030 tubing installation kit. 01/10	-	0	0.00	24,777.33
AME-8020-1478	Ametek Parts	Ametek Gemco AH/ARC System (4) 18 x 8 brakes. Includes:  4 ea. J002932001 18 x 8 type H brake assy.  4 ea. J007905002 actuator assembly  4 ea. J009945995 tube tees  1 ea. J024673999 vibrating horn  1 ea. J066962005 treadle valve installation kit  1 ea. J070943002 air compressor, ¾ HP, 230VDC  1 ea. J071030005 tubing install kit  1 ea. J073900005 hose kit, 2 hose w/ 50 ft tubing  2 ea. J073903005 hose kit, 4 hose w/ 200 ft tubing  1 ea. J089666002 AH/ARC panel, DC  2 ea. PSD0180101 FRB unit, 230 VDC	-	0	0.00	57,512.97
AME-80201500	Ametek Parts	Ametek Gemco AH/ERC, 230 VDC, 2 Brake 18 Inch Hyd Brake, Moving Cab No Pedal	-	0	0.00	16,909.54
AME-8040FS3K-X-L1-N4X-1500-S8	Ametek Parts	Ametek B/W Controls Fixed Sequence Control Panel  Part AME-8040-FS3K-X-L1-N4X-1500-S8	-	0	0.00	Call	N/A
AME-8040-MD-G-L1-N1	Ametek Parts	Ametek B/W Controls Moisture Detect Relay  Part 8040-MD-G-L1-N1  aka 8040MDGL1N1  8040 = Point Level Controls  MD = Moisture Detect Relay  G = Contact Configuration  L1 = Line Voltage  N1 = NEMA 1 Enclosure  Ships in 5 Days, Peck MI  Dated 1-2020	-	2	0.00	346.68
AME-8040-MD-H-L2-N4	Ametek Parts	Ametek B/W Controls Moisture Detect Relay  Part AME-8040-MD-H-L2-N4  8040 = Point Level Controls  MD = Moisture Detect Relay  H = 1 N.O. / 2 N.C  L2 = 208 to 240 Volt AC 50 - 60 Hz  N4 = NEMA 4 Enclosure  Dated 1/18	-	0	0.00	771.43
AME-8061A35565	Ametek Parts	Ametek Gemco Mounting Brackets, Steel 1/15	-	0	0.00	15.75
AME-8061-SR355-065-38	Ametek Parts	Ametek Gemco SnapTrac by 38 Pitches / Links Long 1/15	-	0	0.00	221.40
AME-81101008	Ametek Parts	Ametek Gemco Heavy Duty AISE Spring Set Magnetic Release Shoe Brake Assembly, Direct Current Clapper Type, 10 Inch Wheel Diameter, Voltage DC with Shunt Wound Coils. 200 FT. LBS. 1 Hour. The TMSC Brake has interlocking shoe arms that allow single point adjustment for lining wear. Brake Weight 165 LBS. Net 190 LBS Gross. A 10 X 3.75 Inch Brake Wheel is not included. This brake is also available to operate via a hydraulic slave cylinder for progressive brake application from a crane cab. A Rectifier for AC Voltages is an available option	-	0	0.00	4,470.11
AME-8138	Ametek Parts	Ametek Gemco Belt for the Air Compressor & Motor Assembly	-	0	0.00	Call	N/A
AME-8210-08-2-A-S-Y-A-N-I	Ametek Parts	Ametek Gemco Thruster Brake  Model   8210 =  08 = 8 Inch Diameter Brake  2 = 240 Volt input AC Thruster  A = Standard Transformer Oil  S = Setting Delay Valve  Y = Self Adjustment, Lining Wear  A = Set, Release and Latch Switches  N = Hand Release, non latching  I - Inline Thruster Assembly.Thruster can rotate 90 degrees each direction to facilitate installation  Ships in 7 Weeks  Dated 1-19	-	0	0.00	8,689.68
AME-8210-08-6-X-X-X-X	Ametek Parts	Ametek Gemco Electro Thrust Brake  Part 8210-08-6-X-X-X-X  8210 = Electro Thrust Brake  08 = 8 Inch Diameter Brake Wheel, not included  6 = 230 Volt DC Motor  A = Standard, Transformer Oil   X = No Setting Delay Valve  X = No Self Adjust Option  X = No Set or Release Switches   X = No Hand Release Option  I - Inline Actuator Orientation, Left or Right Hand same cost. Can be moved any time  Ships in 5 Weeks, Peck MI  Dated 1/18	-	0	0.00	7,850.52
AME-8210-08NA-6-A-S-X-X-X-I	Ametek Parts	Ametek Gemco Brake	-	0	0.00	7,547.03
AME-8210-10-2-A-S-Y-A-N-I	Ametek Parts	Ametek Gemco Thruster Brake  Model   8210 = Electro-Thrust Shoe Brake   200 FT LBS  10 = 10 Inch Diameter Brake  2 = 240 Volt input AC Thruster  A = Standard Transformer Oil  S = Setting Delay Valve  Y = Self Adjustment, Lining Wear  A = Set, Release and Latch Switches  N = Hand Release, non latching  I - Inline Thruster Assembly.Thruster can rotate 90 degrees each direction to facilitate installation  Ships in 7 Weeks  Dated 1-19	-	0	0.00	10,006.20
AME-8210-1037	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 160 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, With Adjusting Valve 1.5 to 7.2 Sec. to softly apply the brake 140 LBS	-	0	0.00	4,049.99
AME-8210-10-4-A-S-X-X-X-I	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly 8210  Part 8210-10-4-A-S-X-X-X-I  8210104ASXXXI  8210 = Electro Thrust Shoe Brake, 200 FT LBS,   10 = 10 Inch Diameter  4 = 460 Volt AC, 3 Ph 60 Hz  A = Standard Transformer Fluid   S = Setting Delay Valve, 1.3 to 7.3 Seconds to softly apply the braking torque  X = No Self Adjust Mechanism  X = No Limit Switches for Set & Release  X = No Hand Release to release brake  I = Inline Thruster Orientation, can be rotated 90 degree either direction to save space  Ship in 8 to 10 Weeks, Peck MI  Dated 03-2022  Motor freight Only   (150LBS)	-	0	0.00	6,851.00
AME-8210-10-4-A-S-Y-X-X-I	Ametek Parts	Ametek Gemco Brake  8210 = Electro Thrust Shoe Brake, 200 FT LBS,   10 = 10 Inch Diameter  4 = 460 Volt AC, 3 Ph 60 Hz  A = Standard Transformer Fluid   S = Setting Delay Valve, 1.3 to 7.3 Seconds to softly apply the brakeing torque  Y = Self Adjust Mechanism  X = No Limit Switches for Set & Release  X = No Hand Release to release brake  I = Inline Thruster Orientation, can be rotated 90 degree either direction to save space (150LBS)  2/14	-	0	0.00	6.48
AME-8210-10-4-A-X-X-X-I	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly 8210  Part 8210-10-4-A-X-X-X-I  8210104AXXXI  Spring Applied Electrohydraulic Released Brake  For Overhead Crane Trolley & Bridge Applications.  Engineered to reduce swinging loads.  10 = 10 Inch Diameter Brake / Wheel  4 = 460 Volt AC Thruster Motor  A = X-Former Thruster Oil providing an operating range of -13 thru 104 Degrees F  X = Without Setting Delay ValveE NOT designed for hoist application  Y = Self Adjusting Mechanism providing automatic compensation for lining wear  X = No Set - Release Limit Switches   X = No Hand Relased  I = In-Line Actuator Orientation, can be changed in the field.  Torque Rating 200 LB FT  Built to AISE Specifications, same foot print, relationship to brake wheel & torque as a TM-1035  Ship in 8 Weeks, Peck MI  Dated 06-2022  (LBS)	-	0	0.00	6,900.00
AME-82101056	Ametek Parts	Ametek Gemco Electro-Thrust Brake Assembly, 14 Inch Diameter, 800 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, 320 LBS + skid Ships via motor freight. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters & hydraulic actuators for auxiliary cab control via a progressive hydraulic brake pedal	-	0	0.00	8,440.19
AME-8210-10-6-A-S-X-X-X-L	Ametek Parts	Ametek Gemco Thruster Brake  Part 8210-10-6-A-S-X-X-L  8210 = Electro Thrust Shoe Brake, 200 FT LBS,   10 = 10 Inch Diameter  6 = 230 Volt DC  A = Standard Transformer Fluid   S = Setting Delay Valve, 1.3 to 7.3 Seconds to softly apply the braking torque  X = No Self Adjust Mechanism  X = No Limit Switches for Set & Release  X = No Hand Release to release brake  L = Left Hand Thruster Orientation, can be rotated 180 degrees the other direction to save space  Ships in 7 Weeks  Dated 1-19  (150LBS)	-	0	0.00	9,613.08
AME-8210-10-6-A-S-X-X-X-R	Ametek Parts	Ametek Gemco Thruster Brake  Part 8210-10-6-A-S-X-X-R  8210 = Electro Thrust Shoe Brake, 200 FT LBS,   10 = 10 Inch Diameter  6 = 230 Volt DC  A = Standard Transformer Fluid   S = Setting Delay Valve, 1.3 to 7.3 Seconds to softly apply the braking torque  X = No Self Adjust Mechanism  X = No Limit Switches for Set & Release  X = No Hand Release to release brake  R = Right Hand Thruster Orientation, can be rotated 180 degrees the other direction to save space  Ships in 7 Weeks  Dated 1-19  (150LBS)	-	0	0.00	9,613.08
AME-8210-10-6-A-X-X-X-X-L	Ametek Parts	Ametek Gemco Thruster Brake  Part 8210-10-6-A-X-X-X-X-L  8210 = Electro Thrust Shoe Brake, 200 FT LBS,   10 = 10 Inch Diameter  6 = 230 Volt DC  A = Standard Transformer Fluid   X = No Setting Delay Valve to softly apply the braking torque  X = No Self Adjust Mechanism  X = No Limit Switches for Set & Release  X = No Hand Release to release brake  L = Left Hand Thruster Orientation, can be rotated 180 degrees the other direction to save space  Ships in 7 Weeks  Dated 1-19  (150LBS)	-	0	0.00	9,613.08

Prices are subject to change without notice. Last updated: 11-Aug-2025 06:39:36 AM (EST)

Secure Online Order     Secure Online Order   part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.