Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,242 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,392 part numbers: Motion Control Products     GLEASON 18,084 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,223 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 921 part numbers: Electrical Control Products   HUBBELL 8,392 part numbers: Electrical Control Products   SUPERBOLT 128 part numbers: Fastening Solutions   RENOLD 407 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

GemcoDirect Online Order
 

Database Lookup:     By Part Number By Description
Total 14392 part numbers listed in this database. Shown in 451 pages by 32 items.
Pages:   Prev,   Next,   403  404  405  406  407  408  409  410  411  412  413  414  415  416  417  418  419  420  421  422  423
Part Number	Product Category	Description	Image	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-ENCLOSURE CB160 NEMA 4	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-160 NEMA 4  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	2,622.24
AME-ENCLOSURE CB35 NEMA 4	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-35 NEMA 4  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,126.44
AME-ENCLOSURE CB75 NEMA 3	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-75 NEMA 3  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	740.88
AME-ENCLOSURE CB75 NEMA 4	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure CB-75 NEMA 4  NEMA 4 with Shaft Seals  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,230.12
AME-ENCLOSURE ET-8	Gemco Parts	Ametek Gemco Enclosure. NEMA 3R Enclosure for a ET-8 Brake Assembly. Specifically 8210-8-4-A-S-X-X-N-I	-	0	0.00	3,927.95
AME-ENCLOSURE NEMA 12	Gemco Parts	Ametek Gemco Enclosure. NEMA 12 Enclosure for all AHM Panels. 36 X 48 Inches	-	0	0.00	Call	N/A
AME-ENCLOSURE TM-1355	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TM-1355 NEMA 3R  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,420.20
AME-ENCLOSURE TM-1665 NEMA 4	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TM-1655 NEMA 4  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	6,847.20
AME-ENCLOSURE TM1985	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TM-1955 NEMA 4  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	Call	N/A
AME-ENCLOSURE TM83	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TM-83 NEMA 3R  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	854.28
AME-ENCLOSURE TMSC-1035	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TMSC-1035 NEMA 3R  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,193.40
AME-ENCLOSURE TMSC-1355	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TMSC-1355 NEMA 3R  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	1,420.20
AME-ENCLOSURE TMSC-1665	Gemco Parts	Ametek Gemco Electric Brake Enclosure  Part AME-Enclosure TMSC-1655 NEMA 4  Shaft Diameters and Approval Drawings are required  Must be ordered with a brake  Dated 1/18	-	0	0.00	6,847.20
AME-ET-10	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-10  10 Inch Diameter Brake  Manufactured to AIST Specifications  200 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.3 to 7.3 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 10 X 3.75 Inch, Finished or Pilot Bore Part E010500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only   150 LBS Net, 180 LBS Gross  Ships in 8 to 10 Weeks  Dated 01-2023	-	0	0.00	7,383.00
AME-ET-10DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-10DC  10 Inch Diameter Brake  Manufactured to AIST Specifications  200 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.3 to 7.3 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 10 X 3.75 Inch, Finished or Pilot Bore Part E010500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships in 6 Weeks, Peck MI  Motor Freight Only  150 LBS Net, 180 LBS Gross  Dated 1-19	-	0	0.00	9,613.08
AME-ET-11NA	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly 11"  Part ET-11NA  11 Inch Diameter Brake  400 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.3 to 7.3 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 11 X 5.00 Inch, Finished or Pilot Bore Part E011500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only  Ships in 8 to 10 Weeks, Peck MI  Dated 01-2023  170 LBS Net, 200 LBS Gross	-	0	0.00	8,725.00
AME-ET-11NADC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-11NADC  11 Inch Diameter Brake  400 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.3 to 7.3 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 11 X 5.00 Inch, Finished or Pilot Bore Part E011500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  170 LBS Net, 200 LBS Gross  Ships via Motor Freight Only	-	0	0.00	9,188.63
AME-ET-13	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-13  13 Inch Diameter Brake  Manufactured to AIST Specifications  550 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.2 to 4.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 13 X 5.75 Inch, Finished or Pilot Bore Part E013500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  250 LBS Net, 280 LBS Gross  Ships via Motor Freight Only   Ships in 10 Weeks, Peck MI  Dated 06-2022	-	0	0.00	9,273.00
AME-ET-13DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-13  13 Inch Diameter Brake  Manufactured to AIST Specifications  550 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.2 to 4.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 13 X 5.75 Inch, Finished or Pilot Bore Part E013500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  250 LBS Net, 280 LBS Gross  Ships via Motor Freight Only	-	0	0.00	10,053.71
AME-ET-14NA	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly  Part ET-14NA  14 Inch Diameter Brake  800 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.2 to 4.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 14 X 4.25 Inch, Finished or Pilot Bore Part E014500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  360 LBS Net, 410 LBS Gross  Ships via Motor Freight Only   Ships in 6 Weeks  Dated 06-2022	-	0	0.00	14,183.00
AME-ET-14NA DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-14NADC  14 Inch Diameter Brake  800 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.2 to 4.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 14 X 4.25 Inch, Finished or Pilot Bore Part E014500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  320 LBS Net, 370 LBS Gross  Ships via Motor Freight Only	-	0	0.00	12,007.42
AME-ET-16	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-16  16 Inch Diameter Brake  Manufactured to AIST Specifications  1000 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.45 Seconds  With Adjustable Valve 0.8 to 3.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  400 LBS Net, 430 LBS Gross  Ships via Motor Freight Only  Ships in 6 Weeks, Peck MI  Dated 01-2021	-	0	0.00	12,243.96
AME-ET-16DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-16  16 Inch Diameter Brake  Manufactured to AIST Specifications  1000 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.45 Seconds  With Adjustable Valve 0.8 to 3.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  400 LBS Net, 430 LBS Gross  Ships via Motor Freight Only	-	0	0.00	12,736.42
AME-ET-18NA	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-18NA  18 Inch Diameter Brake  1500 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  580 LBS Net, 610 LBS Gross  Ships via Motor Freight Only   Dated 06-2022	-	0	0.00	15,949.00
AME-ET-18NA DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-18NADC  18 Inch Diameter Brake  1500 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  580 LBS Net, 610 LBS Gross  Ships via Motor Freight Only	-	0	0.00	15,221.50
AME-ET-19	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-19  19 Inch Diameter Brake  Manufactured to AIST Specifications  2000 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  640 LBS Net, 670 LBS Gross  Ships via Motor Freight Only	-	0	0.00	15,275.52
AME-ET-19NA	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-19NA  19 Inch Diameter Brake  1600 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC is required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  640 LBS Net, 670 LBS Gross  Ships via Motor Freight Only  Pricing on request	-	0	0.00	Call	N/A
AME-ET-6NA	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-6NA  6 Inch Diameter Brake  60 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 6 X 3.125, Finished or Pilot Bore Part E006500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships in 6 Weeks  Dated 06-2022  Ships via Motor Freight Only   120 LBS Net, 150 LBS Gross	-	1	0.00	5,201.00
AME-ET-8	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly  Part ET-8  8 Inch Diameter Brake  Manufactured to AIST Specifications  100 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships from Stock to 5 Weeks  Motor Freight Only  140 LBS Net, 170 LBS Gross  Dated 1-2020	-	1	0.00	5,282.28
AME-ET-8DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly   Part ET-8DC  Manufactured to AIST Specifications  8 Inch Diameter Brake  100 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  140 LBS Net, 170 LBS Gross  Ships via Motor Freight Only  Dated 1/18	-	0	0.00	7,850.52
AME-ET-8NA	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly  Part ET-8NA  8 Inch Diameter Brake  160 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only   140 LBS Net, 170 LBS Gross  Ship in 6 to 8 Weeks, Peck MI  Dated 06-2022	-	3	0.00	5,660.00
AME-ETH-08 BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 100 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters	-	0	0.00	7,159.31

Prices are subject to change without notice. Last updated: 04-May-2025 08:29:34 AM (EST)

Secure Online Order     Secure Online Order   part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.