Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,160 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,370 part numbers: Motion Control Products     GLEASON 18,099 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,228 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 925 part numbers: Electrical Control Products   HUBBELL 8,289 part numbers: Electrical Control Products     RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

GemcoDirect Online Order
 

Database Lookup:     By Part Number By Description
Total 48160 part numbers listed in this database. Shown in 1505 pages by 32 items.
Pages:   Prev,   Next,   413  414  415  416  417  418  419  420  421  422  423  424  425  426  427  428  429  430  431  432  433
Part Number	Product Category	Description	Image	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-CB-160	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-160  Spring Set / Solenoid Released   10 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  160 FT LB Intermittent Duty  125 FT LB Continuous Duty  Less a 10.00 X 4.25 Inch Brake Wheel   Reliable design with very few parts  Simple one point torque adjustment  Rugged Long Life Solenoid  Tested in more than 2 million operational cycles without electrical failure  Manual Brake Release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  A mark on the plunger indicates when the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Options available at additional cost include:  A Brake Wheel, Pilot or Finished Bore, Pilot Bore Part E010800  Brake Enclosures NEMA 3 & 4  Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks  Dated 01-2025  (80LBS) H 16" L 22" W 8" Box		3	0.00	9,931.52
AME-CB-35	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-35  CB35  Spring Set / Solenoid Released  5.50 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  35 FT LB with a Intermittent Duty Cycle  20 FT LB with a Continuous Duty Cycle  Less a 5.50 X 3.25 Inch Brake Wheel E005500  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid - tested in more than 2 million operational cycles  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  Simple two-point adjustment for lining wear  Is a Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Stock to 6 Weeks to Ship  Dated 01-2025  (34LBS) H 12" L 18" W 14" Box		16	0.00	1,655.00
AME-CB-75	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part CB-75  Spring Set / Solenoid Released  7.00 Inch Diameter  Many AC Voltages 460, 230, 115, 575  60 Hz Single Phase  75 FT LB with a Intermittent Duty Cycle  50 FT LB with a Continuous Duty Cycle  Less a 7.00 X 3.25 Inch Brake Wheel E007500  Options include, 230, 115 & 575 Volt  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid  Tested in more than 2 million operational cycles without electrical failure  Manual brake release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  A mark on the plunger indicates when the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks to Ship  Dated 01-2025  (60LBS) H 12" L 20" W 8"		0	0.00	2,536.00
AME-CO197500	Ametek Parts	Ametek Gemco Cover. Cover only for a Series 1980 NEMA , 4 to 6 Circuit Cam Box (4LBS)	-	0	0.00	168.48
AME-COIL TM-1035	Ametek Parts	Ametek Gemco Brake Coil  For a 10 Inch TM-1035 DC Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  Stock to 6 weeks, Peck MI  Dated 01-2021  (30LBS)	-	0	0.00	3,613.68
AME-COIL TM-1355	Ametek Parts	Ametek Gemco Brake Coil  For a 13 Inch TM-1355 Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  Ships from Stock to 6 Weeks  Dated 01-2021	-	0	0.00	5,241.24
AME-COIL TM-1665	Ametek Parts	Ametek Gemco Brake Coil  For a 16 Inch TM-1665 DC Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26  2 per brake, sold each  Ships in 6 Weeks, Peck MI  Dated 01-2021	-	0	0.00	6,607.44
AME-COIL TM-1985	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-1985 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each   Dated 01-2021	-	0	0.00	10,707.12
AME-COIL TM-2311	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-2311 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  (150LBS) 1/17	-	0	0.00	14,019.48
AME-COIL TM-3014	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-3014 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  (280LBS) 1/17	-	0	0.00	17,327.52
AME-COIL TM-43	Ametek Parts	Ametek Gemco Brake Coil TM  For a 4 Inch TM-43 DC Brake  Series or Shunt Wound  This description is for pricing only  Exact part number is required at time of order  Item 26, 1 per brake  Ships from Stock to 6 Weeks  Dated 01-2021	-	0	0.00	1,718.28
AME-COIL TM-63	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-63 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 1 per brake  Ships in 5 Weeks  Dated 01-2021	-	0	0.00	1,801.44
AME-COIL TM-83	Ametek Parts	Ametek Gemco Coil  Series or Shunt Wound  For a TM-83 Brake  This description is for pricing only  Exact part number is required at time of order  Item 26, 2 per brake, sold each  Dated 01-2021  (25LBS)	-	0	0.00	3,128.76
AME-CONVERSION SYSTEM TYPE H	Ametek Parts	Ametek Gemco A/H-ERC Conversion System for Type H Wagner Hydraulic Brake Systems. Converts a Wagner manual brake system to an Air Over Hydraulic Brake System that can be controlled remotely via an electric circuit. This conversion is for Wagner Hydraulic Brake Systems though other hydraulic brake systems could be suitable for this conversion. (system suitability investigation would be required) The Conversion System Includes: One 3/4 HP Motor Driven Compressor Assembly, One Pre- Piped and Pre-Wired Control Panel, One Two-Way Hydraulic Check Valve, One Installation Kit including all the necessary tubing, fittings & fluid. If the existing brake system does not include a Fluid Reservoir Bleeder, it is required, and is at additional cost. This system requires electrical input of 230 Volt DC or 460 Volt AC, 3 Phase, 60 Hz for the compressor and 115 Volt Control on AC Systems. Please specify AC or DC at time of order. Systems are available with the HM parking option at additional cost.  Ships in 5 week, FOB Peck MI  Dated 1/18	-	0	0.00	23,851.80
AME-CR1095004010	Ametek Parts	Ametek Gemco Resolver see SD0308900	-	0	0.00	Call	N/A
AME-CR41093052	Ametek Parts	Ametek Gemco Resolver see SD0308900	-	0	0.00	Call	N/A
AME-CR41093053	Ametek Parts	Ametek Gemco Resolver see SD0308900	-	0	0.00	Call	N/A
AME-D7010	Ametek Parts	Ametek Gemco Yates Tube. Replacement Tube, H4-F-N3.2X-1.00X1.38XXS13, Rev NS, TM1355	-	0	0.00	121.38
AME-DOCUMENT-LOOK-UP	Ametek Parts	For Ametek Service & Support Manuals go to:    http://www.gemcodirect.com    At the Bottom at the Page on the Right Side, Enter 3 or More Characters of OEM Part Number to obtain all this Information	-	0	0.00	Call	N/A
AME-DT-2RV212-A7	Ametek Parts	Ametek Gemco Switch  Part 04537003  aka DT-2RV212-A7  Used in the 2000-805, 2000-806, 2000-807, 2000-808, 2000-809, 2000-837,  2000-838, 2000-839, 2000-840. 2000-841, 2000-869, 2000-870, 2000-871,  2000-872, 2000,873, 2000-823, 2000-824, 2000-825, 2000-855, 2000,856,   2000,857, 2000-8887, 2000-888, 2000-889  Normally a Stock item @ BPI  Ships from Stock to 2 Weeks  Dated 05-2022  (1LB) H 4" L 5" W 4" Box		0	0.00	217.08
AME-E004000	Ametek Parts	Ametek Gemco Brake Assembly TM-43  DC Magnetic Brake Assembly Mfg to AIST Standards  Heavy Duty Spring Set, Magnetic Release Shoe Brake Assembly for Fail-Safe Operation  Direct Current Clapper Type Brake  4.5 Inch Diameter  Provided with a Shunt Wound Coil Part E004051  Designed for 1 or 8 Hour Duty Cycle  80 Volts Intermittent 64 Volts Continuous  25 Ft LBS @ 1 Hour  15 FT LBS @ 8 Hours  Options Available some at additional cost include:  A Brake Wheel 4.500 X 3.125 / Finished or Pilot Bore Part E004500  Series Wound Coil, same cost  AC to DC Rectifiers, Part E010326 with NEMA 4 Enclosure or Part E010326 Open Chassis Design  A Manual Hand Release Lever, latching or non-latching  NEMA 3 and 4 Brake Enclosures  Stock to 4 Weeks to Ship  Product available at Amazon.com and BrakeProducts.com  Dated 7/18  (41LBS) H 15" L 20" W 10" Box	-	0	0.00	2,611.44
AME-E004003	Ametek Parts	Ametek Gemco Brake Assembly TM-43  DC Magnetic Brake Assembly Mfg to AIST Standards  Heavy Duty Spring Set, Magnetic Release Shoe Brake Assembly for Fail-Safe Operation  Direct Current Clapper Type Brake  4.5 Inch Diameter  Provided with a Series Wound Coil Part E004153  Designed for 1 or 8 Hour Duty Cycle  80 Volts Intermittent 64 Volts Continuous  25 Ft LBS @ 1 Hour  15 FT LBS @ 8 Hours  Options Available some at additional cost include:  A Brake Wheel 4.500 X 3.125 / Finished or Pilot Bore Part E004500  Series Wound Coil, same cost  A Manual Hand Release Lever, latching or non-latching  NEMA 3 and 4 Brake Enclosures  Stock to 4 Weeks to Ship  Product available at Amazon.com and BrakeProducts.com  Dated 7/18  (41LBS) H 15" L 20" W 10" Box	-	0	0.00	2,611.44
AME-E004009	Ametek Parts	Ametek Gemco DC Brake Assembly TM  Part E004009001  TM43  DC Magnetic Brake Assembly, Mfg to AIST Standards  Heavy Duty Spring Set, Magnetic Release Shoe Brake Assembly   Direct Current Clapper Type Brake  4.5 Inch Diameter  With a Series Coil Part E004167  Options Available some at additional cost include:  A Brake Wheel 4.500 X 3.125 / Finished or Pilot Bore Part E004500  A Manual Hand Release Lever, latching or non-latching  NEMA 3 and 4 Brake Enclosures  Ships in 8 Weeks, Peck MI  Dated 01-2024  (41LBS) H 15" L 20" W 10" Box	-	2	0.00	3,369.00
AME-E004011	Ametek Parts	Ametek Gemco Heavy Duty Spring Set Magnetic Release Shoe Brake Assembly, Direct Current Clapper Type, 4.5 Inch Wheel Diameter, with a Series Wound Coil E004169 , Designed for One Hour Duty. 25 Ft LBS @ 1 Hour. Series Coils are connected so that 1/2 of the current flows through each coil. Coil 25 FT LBS @ 1/2 Hour A 4.5 X 3.125 Inch Brake Wheel is not included  Dated 7/18  (41LBS)	-	0	0.00	2,611.44
AME-E004020	Ametek Parts	Ametek Gemco Solenoid Brake Assembly  Spring Set / Solenoid Released for Fail-Safe Operation  4.5 Inch Diameter  115 Volt AC @ 60 Hz., Single Phase  10 Ft LB Continuous Duty Cycle  15 FT LB Intermittent Duty Cycle  Less a 4.50 X 2.75 Inch Brake Wheel E004800  Dated 7/18  (20LBS) H 8.31" L 12.00" W 5.31"	-	0	0.00	930.96
AME-E004021	Ametek Parts	Ametek Gemco Solenoid Brake Assembly  Spring Set / Solenoid Released for Fail-Safe Operation  4.5 Inch Diameter  220 Volt AC @ 60 Hz., Single Phase  10 Ft LB Continuous Duty Cycle  15 FT LB Intermittent Duty Cycle  Less a 4.50 X 2.75 Inch Brake Wheel E004800 aka 2250C15G12  Dated 7/18  (20LBS) H 8.31" L 12.00" W 5.31"	-	0	0.00	930.96
AME-E004022	Ametek Parts	Ametek Gemco Solenoid Brake Assembly  Spring Set / Solenoid Released for Fail-Safe Operation  4.5 Inch Diameter  460 Volt AC @ 60 Hz., Single Phase  10 Ft LB Continuous Duty Cycle  15 FT LB Intermittent Duty Cycle  Less a 4.50 X 2.75 Inch Brake Wheel E004800  Dated 7/18  (20LBS) H 8.31" L 12.00" W 5.31"	-	0	0.00	959.04
AME-E004044	Ametek Parts	Ametek Gemco Resistor  For a TM43 Brake Assembly with a Shunt Wound Coil  This is the standard resistor  Not to be used with rectifiers employing a Forcing Scheme  E004045 is used with a Forcing Scheme Rectifier	-	1	0.00	351.00
AME-E004045	Ametek Parts	Ametek Gemco Resistor  Forcing Resistor for use with a TM-43 Brake Assembly	-	0	0.00	351.00
AME-E004047	Ametek Parts	Ametek Gemco Brake Shoe Assembly 4.5" TM-43  Part E004047  aka 645C555G02 E004047002  Brake Shoe & Lining  For a TM-43 4.5 Inch Electric Brake  Bonded Premium Non-Asbestos Lining Material  2 Per brake, sold each  70 Degree Arc  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 10-2025  (2LBS) H 4" L 5" W 4" Box	-	0	0.00	824.00
AME-E004049	Ametek Parts	Ametek Gemco Enclosure  NEMA 3 Enclosure for a CB-15 Brake Assembly	-	0	0.00	287.28
AME-E004051	Ametek Parts	Ametek Gemco Brake Coil 4.5" TM43  Part E004051  Old Part 645C545G16  Shunt Wound Brake Coil  For a 4.5 Inch TM-43 DC Brake  Intermittent Duty, 1 Hour Cycle 80 Volts DC - 1.10 AMPS  Continuous Duty, 8 Hour Cycle 64 Volts DC - 0.88 AMPS  Average Cold Coil Resistance 73 OHMS  Item 26, 1 per   Resistors are required in series, Part E004044 or Forcing E004045  Ships in 6 Weeks, Peck MI  Dated 01-2023  (16LBS) H 4" L 6" W 6" Box	-	0	0.00	1,912.00

Prices are subject to change without notice. Last updated: 26-Oct-2025 07:00:42 AM (EST)

Secure Online Order     Secure Online Order   part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.