Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,169 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,371 part numbers: Motion Control Products     GLEASON 18,098 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,228 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 925 part numbers: Electrical Control Products   HUBBELL 8,289 part numbers: Electrical Control Products     RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

GemcoDirect Online Order
 

Database Lookup:     By Part Number By Description
Total 48169 part numbers listed in this database. Shown in 1506 pages by 32 items.
Pages:   Prev,   Next,   421  422  423  424  425  426  427  428  429  430  431  432  433  434  435  436  437  438  439  440  441
Part Number	Product Category	Description	Image	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-E008061	Ametek Parts	Ametek Gemco Clapper & Arm  For an 8 Inch TM-83 Brake Assembly  1 per brake  aka 439C324G01  Dated 01-2024	-	0	0.00	2,291.00
AME-E008063	Ametek Parts	Ametek Gemco Handle    Dated 01-2024	-	0	0.00	190.00
AME-E008064	Ametek Parts	Ametek Gemco Mounting Block  Dated 01-2024	-	0	0.00	461.00
AME-E008065	Ametek Parts	Ametek Gemco Mounting Block  Dated 01-2024	-	0	0.00	461.00
AME-E008066	Ametek Parts	Ametek Gemco Eye Bolt  Part E008066  aka E008026999  For an 8 Inch TM-83 DC Brake  Dated 01-2024	-	0	0.00	911.00
AME-E008067	Ametek Parts	Ametek Gemco Hinge Block  Part E008067  Hinge Block on the Magnet End  For a TM-83 & TM-1035 DC Brake  Item 1  Old WEST 469B671H02  Dated 01-2024	-	0	0.00	901.00
AME-E008068	Ametek Parts	Ametek Gemco Hinge Block  Wheel End Hinge Block  For a TM-83 & TM-1035 Brake  Item 12, 1 per brake  aka 318B787H03  Dated 01-2024	-	1	0.00	902.00
AME-E008075	Ametek Parts	Ametek Gemco Leads  Part E008075  Series Lead Wires  For TM-43 to TM-1665 DC Brakes  With Series Wound Coils  aka E008075006  aka Old West 439C463G03  Ships in 2 to 3 Weeks  Dated 7/18	-	0	0.00	97.20
AME-E008085	Ametek Parts	Ametek Gemco Series Coil for a TM-83 Brake Assembly. 1 Coils is required on this brake. 25 Coil Amps one hour. 36.5 Coil amps half hour. Average resistance 0.086 Ohms. Ref # 26	-	0	0.00	1,913.76
AME-E008086	Ametek Parts	Ametek Gemco Coil  Part E008086  Series Wound Brake Coil  For a 8 Inch TM-83 DC Brake  Item 26, 2 per brake, sold each  19 AMPS Ea ½ Hr  14 AMPS Ea 1 Hr  0.601 OHMS AVG per coil  aka 637C504G25  Ships in 5 weeks, Peck MI  Dated 7/18	-	0	0.00	2,863.08
AME-E008093	Ametek Parts	Ametek Gemco Hand Release Assembly for a TM83 Brake Old price	-	0	0.00	311.04
AME-E008121	Ametek Parts	Ametek Gemco Switch Kit to complete a Brake Engagement Circuit on a TM83 Brake. Includes Switch, Bracket, Hardware & Instructions. Some brake modification is required This single switch can be wired for a normally open or a normally closed circuit allowing this switch to show a engaged or disengaged brake. One or the other not both   Dated 01-2024	-	0	0.00	1,165.00
AME-E008183	Ametek Parts	Ametek Gemco Tie Rod Assembly Populated  Part E008183  aka E008183002  Completely Assembled Tie Rod, Populated  Ready for installation as a single component on an 8 Inch TM-83 Brake  Includes 9 Parts:  E008183 Tie Rod  E008034 Wheel End Spring Seat # 11  E008034 Inner Clapper Block #4  E008037 Main Spring Seat #2  E008039 Main Spring #3  E008049 Tie Rod #6  E008067 Magnet End Block #1  E008068 Outer Shoe Block #12  E010075 Release Bushing #5  E010079 Wheel End Spring #10  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks	-	0	0.00	3,203.28
AME-E008199	Ametek Parts	Ametek Gemco Pin, Base Pin Assembly   For a TMSC-1035 & ET-10 Brake  Includes the 2 retaining rings for installation		2	0.00	86.40
AME-E008200	Ametek Parts	Ametek Gemco Pin. Inner Shoe Arm Pin. 1 per brake 1/14	-	0	0.00	86.40
AME-E008206	Ametek Parts	Ametek Gemco Tie Rod on an ET-8 Brake	-	0	0.00	243.00
AME-E008500	Ametek Parts	Ametek Gemco Brake Wheel 8 Inch TM  Part E008500  aka E008500999  For the TM-83 DC Brake Assembly  And ET-8 Thruster Brake  With the Offset Style Hub, Stock Bore  8.02 Inch Brake Wheel Diameter  3.25 Inch Face Width  3.00 Inch Hub Offset  3.50 Inch Hub Length Through Bore  3.25 Inch Hub Diameter  Solid Hub with Bore Center Drilled   2.25 Inch Maximum Recommended Bore  5525 Maximum RPM  Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06  Dated 10-2021	-	1	0.00	1,523.88
AME-E008501	Ametek Parts	Ametek Gemco Brake Wheel. 8 Inch Diameter Brake Wheel with a Finished Bore and Keyway for a 603, 604, 803 & 804 Mill Motor	-	0	0.00	1,564.92
AME-E008510	Ametek Parts	Ametek Gemco Brake Wheel AIST 8 Inch  Part E008510  8 Inch Brake Wheel Diameter  Hub Length Bore & keyway for:  603 803 604 804 Motors  With the AIST Standard Offset  D = 8.00 Inch Diameter  F = 3.25 Inch Face Width  O = 4.00 Inch Offset  H = 3.5 Inch Offset  B = 2.00 Inch Bore Diameter  1.25 Inch Taper   0.50 X 0.25 Inch Keyway  aka   Dated 1/18	-	0	0.00	1,564.92
AME-E008514	Ametek Parts	Ametek Gemco Brake Wheel. 8 Inch Diameter Brake Wheel with a Finished Bore and Keyway for a 402, 602 0r 802 Mill Motor	-	0	0.00	1,405.08
AME-E008515	Ametek Parts	Ametek Gemco Brake Wheel. 8 Inch Diameter,3.25 Face Width, 4.25 Inch Offset, 1.875 Bore with a 1/2 X 1/4 Keyway	-	0	0.00	1,405.08
AME-E008548	Ametek Parts	Ametek Gemco Brake Wheel 8 Inch Diameter with a finished bore, keyway & 2 drilled & tapped holes (23LBS)	-	0	0.00	1,449.00
AME-E010000	Ametek Parts	Ametek Gemco DC Brake  Part TM-1035  aka TM1035  Heavy Duty AIST Spring Set Magnetically Released Brake Assembly  Direct Current Clapper Type  10 Inch Wheel Diameter  Voltage DC with Shunt Wound Coils Part E010049 - 635C328G16  With Shunt Coils 200 FT. LBS., 1 Hour & 150 FT LBS 8 Hours  A 10 X 3.75 Inch Brake Wheel is not included  A Rectifier for AC Voltages is available at additional cost  Motor Freight Only  [Ships Stock to 7 Weeks]  [Updated 1-19]  (165LBS)	-	0	0.00	5,660.28
AME-E010011	Ametek Parts	Ametek Gemco Solenoid Brake Assembly   Part E010011 CB-160 230 Volt  Spring Set / Solenoid Released   10 Inch Diameter  230 Volt AC Coil  60 Hz Single Phase  160 FT LB Intermittent Duty  125 FT LB Continuous Duty  Less a 10.00 X 4.25 Inch Brake Wheel   Reliable design with very few parts  Simple one point torque adjustment  Rugged Long Life Solenoid  Tested in more than 2 million operational cycles without electrical failure  Manual Brake Release with hand pressure on the solenoid arm  Solenoid plunger travel indicator  A mark on the plunger indicates when the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Options available at additional cost include:  A Brake Wheel, Pilot or Finished Bore, Pilot Bore Part E010800  Brake Enclosures NEMA 3 & 4  Light Duty Solenoid Brake for up to Class "C" Cranes  Application Safety Factors need to be followed during selection of a brake  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks  Dated 01-2023  (80LBS) H 16" L 22" W 8" Box	-	0	0.00	7,701.00
AME-E010012	Ametek Parts	Ametek Gemco Magnetic Shoe Brake Assembly  Part CB-75  Spring Set / Solenoid Released for Safe Operation  7.00 Inch Diameter  460 Volt AC   60 Hz Single Phase  75 FT LB with a Intermittent Duty Cycle  50 FT LB with a Continuous Duty Cycle  Less a 7.00 X 3.25 Inch Brake Wheel E007500  Options include input voltages of 230, 115 & 575 Volt AC, 60 Hz  Reliable design with very few parts  Simple one point torque adjustment  Rugged long life solenoid - tested in more than 2 million operational cycles  Without electrical failure  Manual Brake Release with hand pressure on the solenoid arm  Solenoid plunger travel indicator - a mark on the plunger indicates  when the brake should be adjusted for lining wear  Simple two-point adjustment for lining wear  Stock to 4 Weeks to Ship  Product available at Amazon.com and BrakeProducts.com  [Amazon] Dated 1/18  (60LBS) H 12" L 20" W 8" Box	-	0	0.00	3,018.60
AME-E010044	Ametek Parts	Ametek Gemco Resistor  Part E010044  External Resistor  For a 10 Inch TM-1035 DC Brake  142.3 OHM 550 Watt  old 423A298G02  [Amazon]  (4LBS) H 4" L 12" W 4" Box		1	0.00	351.00
AME-E010045	Ametek Parts	Ametek Gemco Resistor  Part E010045  External Resistor  Forced  For a 10 Inch TM-1035 DC Brake Assembly  With taps set as specified on Ametek data sheet  (4LBS) H 4" L 12" W 4" Box	-	1	0.00	345.60
AME-E010047	Ametek Parts	Ametek Gemco Brake Shoe Assembly TM 10"  Part E010047  aka E0100470002  Old Part 635C292G01  For a 10 Inch TM-1035 or ET-10 Brake  Item 14  2 per brake, sold each  Premium OEM Non-Asbestos Bonded Lining Material  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (5LBS) H 4" L 10" W 4" Box		0	0.00	1,166.00
AME-E010049	Ametek Parts	Ametek Gemco Coil TM 10"  Part E010049  Old Part 635C328G16  Shunt Wound Coil  For a 10 Inch TM-1035 DC Brake  TM = Twin Magnet - Coils Brake  Item 26, 2 Coils per brake, sold each  32 Volts per coil continuous duty  0 Volts per coil intermittent duty  Average resistance 24 OHMS  Coils are connected in series  Ships in 6 Weeks, Peck MI  Dated 01-2023  (30LBS)	-	0	0.00	4,023.00
AME-E010054	Ametek Parts	Ametek Gemco Pin CB-160  Part E010054  aka E010054006  For a 10 Inch CB-160 AC Brake  Item 14, 3 per brake, sold each  Located at the top & bottom of the brake shoes  Old WEST 2247C08H10  Ships in 2 Weeks   Dated 01-2024  (1LB) H 4" L 5" W 4" Box	-	0	0.00	172.00
AME-E010055	Ametek Parts	Ametek Gemco Pin CB-160  Part E010055  aka E010055006  Old WEST 2247C08H11  Pin  For a 10 Inch CB-160 Brake  Item 8, 1 per brake  Connects top of Link to Brake Lever  Ships from Stock to 2 Weeks  Dated 01-2024  (1LB) H 4" L 5" W 4" Box		6	0.00	90.00
AME-E010056	Ametek Parts	Ametek Gemco Pin CB-160  Part E010056  aka E0010056006  Old Part 2247C08H12  For a CB-160 Brake  Item 6, 1 per brake  Connects Plunger to Link  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2024  (1LB) H 4" L 6" W 4" Box	-	7	0.00	54.00

Prices are subject to change without notice. Last updated: 03-Nov-2025 07:07:30 AM (EST)

Secure Online Order     Secure Online Order   part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.