Product Selector   Gemco 1997 Gate Hoist Lmt Swtch Gemco Stamping Press Control Gemco 1980 Micro-Adjust Cams Gemco 1980S Limit Switch Manual Gemco 2000 Rotary Limit Switches Gemco 3001 Adjustable Couplings Brake Systems Application Guide Model CB/TM Brakes Manual Model ET Shoe Brakes Manual Model H Shoe Brakes Manual Model H Brake Parts Manual   GEMCO Type H & HM Installation, Dimensions      and Service Manual:   Type H Brake System   Type HM Brake System   General   Brake Dimensions   Air-Over-Hydraulic (Type A/H)      Brake System   Air-Over-Hydraulic Parking      (Type A/HM) Brake System   Type A/H and A/HM General      Information   General Troubleshooting   Index for Specific System      Piping and Wiring Diagrams   Typical Piping and Wiring      Diagrams for Type A/H and      A/HM Systems   Compressor and Motor      Information

And   Or     All Site   Selected Product Order Details Items 0 Total $0.00     Logon Status Not logged on Download  GEMCO Type H & HM Installation, Dimensions and  Service Manual:    Microsoft Word® 97 format (3.6 MB)    Adobe Acrobat® format (3.3 MB) Get Viewer Get Reader

INSTALLATION INSTRUCTIONS Air Compressor and Motor Assembly
COMPRESSOR ASSY. NO. MOTOR HP MOTOR VOLTAGE MOTOR PULLEY PD BELT LENGTH J-70941 J-70942* J-70943 3/4 3/4 3/4 575, 3 ph., 60 Hz 460, 3 ph., 60 HZ 230V DC 3.9" 3.9" 3.9" 51" 51" 51"
* J-70942 is also suitable for use on 380V, 3 ph, 50 Hz.
Mount the compressor near the air hydraulic panel. Position the compressor so that the fan type compressor fly-wheel is at least 12 inches from the wall to allow ample air circulation. Elevate the compressor so the 1/2" outlet is above the reservoir inlet on the panel, to allow any moisture to drain to the reservoir. Use 1/2" tubing for compressor supply line and 3/8" tubing for compressor control line.   Fill compressor crankcase with nondetergent oil of grade and type recommended by compressor manufacturer. Fill oil bath air filter to indicated line.   Connect compressor motor to starter on panel. Be sure that motor rotates compressor in direction of arrow.   Start compressor and check pressure. Lubrication pressure gauge should indicate 16 psi. Air reservoir pressure should reach 80 psi. Check for air leakage. Tighten fittings if necessary.