Product Selector

 
  Hydraulic Brakes Replacement Parts:
    Brake Assemblies
    Auxilary Components
    Air-Releasing Cylinder
Disc Brake Power Clusters
Air-Over-Hydraulic Panels
Air-Over-Hyd. Panel Components
 
And   Or     All Site   Selected Product
Order Details
Items 0
Total $0.00
 
 
Logon Status
Not logged on

Download
 GEMCO Hydraulic Brake Systems Parts Manual:
   Adobe Acrobat® format
 
GEMCO Industrial Brake Systems Replacement Parts
Air Components Used On Air-Over-Hydraulic Panels
Moisture Ejection Valve
 
Moisture Ejection Valve J107084
 
This valve automatically keeps air reservoirs clean and dry. Each brake application causes a small volume of air and any accumulated moisture from the air supply tank to fill the valve chamber. This is expelled to atmosphere when application pressure is released.
 
Typical Installation of Valve on A/H ERC Panel
Small Panel Piping
 
 
 
 

Large Panel Piping
 

 
      VALVE SERVICE
 
Periodically open the air supply tank drain cock. A relatively clean discharge of air indicates that the valve is functioning properly.
 
A constant air leakage from the exhaust port during application period indicates a defective seal.
 
To repair the valve, obtain repair kit J107085. Drain the system. To vent or drain system, pull cord attached to valve. Completely disassemble the valve, inspect and clean the valve body. Reassemble the valve using new parts - items 2, 4, 5, & 6. Tighten nuts as shown. Change filter. Reinstall valve in unit.
 

 
Parts Description
Item No. Description Qty
1
2
3
4
5
6
7
  Valve Body
  "O" Ring
  Cover
  Piston Assembly
  Retaining Ring
  Screen
  Screw
1
1
1
1
1
1
4
Repair Kit J107085 contains items 2, 4, 5 & 6
 
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
Supplier of Industrial Brake Parts Since 1985