Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
3,087 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,111 part numbers: Motion Control Products
 
  GLEASON
23,199 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,726 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,285 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,504 part numbers: Motor Mounted Brakes
  HUBBELL
16,217 part numbers: Electrical Control Products
  SUPERBOLT
120 part numbers: Fastening Solutions
  TELEMOTIVE
2,423 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
732 part numbers
 

Gemco Direct
Amazon Store

 
5,982 part numbers
 

Gleason Direct
Amazon Store

 
1,040 part numbers
 

Telemotive Direct
Amazon Store

 
19 part numbers
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Linear Displacement Transducers
950MD Mill Duty Housing LDT
 
DESCRIPTION
 
Mill Duty Housing - The Gemco 950MD Mill-Duty Housing is a stainless steel housing designed to protect LDTs in harsh or high temperature environments such as those found in heavy industrial plants and processes. In addition, it is also used where Nema 4 protection is required or where mounting limitations exist.
 
Gemco Ordering Guide
950MD Manual
Magnets, Cables and Connector Styles
 

 

 

 

950 MD Accessories
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-04578009 Ametek Gemco Vortex Cooler, 950MD 
[1/2017]
- 0 $513.00
2 AME-04578010 Ametek Gemco Muffler for Vortex Cooler 950MD 
[1/2017]
- 0 $10.00
3 AME-04521262 Ametek Gemco Replacement (Male Connector) for Option C Connector; Product line: 950MD 
[1/2017]
- 0 $38.00
4 AME-04521261 Ametek Gemco Female Mating Connector for Option C Connector; Product line: 950MD 
[1/2017]
- 0 $38.00
5 AME-04570140 Ametek Gemco Replacement 1/2 Inch Front Spherical Rod End - Male; Product line: 950MD 
[1/2017]
- 0 $30.00
6 AME-C0903400 Ametek Gemco Bracket 
Guide Tube Support Bracket 
Part AME-C0903400 
Provided with 950 Mill Duty Housings with Strokes Over 72 Inches 
Increases Rigidity of the Housing Assembly 
Interference Fit to Housing 1/17
- 0 $33.00
7 AME-04521407 Ametek Gemco Replacement (Male Connector) for Option C2 Connector, 10 Pin; Product line: 950MD 
[1/2017]
- 0 $42.00
8 AME-04521372 Ametek Gemco Connector 
AME-SD04521372 
Mating Connector 
For 951, 952, 952QD, 953A, 953D LDT's 
With the "E" Connector Configuration 
Female 10 Pin 
[Amazon] 
Dated 1/17 
(1LB) H 4" L 4" W 4" Box
2 $41.00
9 AME-SD0448800 Ametek Gemco Head & Cable Assembly. 950 to 951 / 952. For changing from a 950 to a 951 or 952 LDT. With a 10 Pin Quick Disconnect 
[1/2017]
- 1 $153.00
10 AME-SD0501900 Ametek Gemco Water Cooled Jacket for 951, 952, 953 Head Assembly; Product line: 950MD 
[1/2017]
- 0 $1,346.00
11 AME-04521568 Ametek Gemco Replacement (Male Connector) for Option C3 Connector 12mm 5 Pin; Product line: 950MD 
[1/2017]
- 0 $36.00
12 AME-M0761900 Ametek Gemco Piston Bearing; Product line: 950MD 
[1/2017]
- 0 $92.00
13 AME-SD0452400 Ametek Gemco Piston & Magnet Sub Assembly on a 950MD Housing 
[1/2017]
- 0 $172.00
950, 951, 952 and 953 LDT Cable Assemblies
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-949013L6 Ametek Gemco Cable & Connector Assembly. 950 to 952A or 953A with connector option "S". C3 Connector, by 6 Feet Long. 5 Pin 12 mm 
(2LBS) H 6.00" L 5.00" W 5.00" 
[Amazon] 
[1/2017]
3 $43.00
2 AME-949031L6 Ametek Gemco Cable & Connector Assembly by 6 Feet Long for a 950MD. 6 Pin Straight 12mm Euro with a Stainless Steel Coupling Nut, Shielded 
[1/2017]
- 0 $55.00
3 AME-SD0439700L6 Ametek Gemco Cable Connector Assembly 
For a Rod Style LDT 
With a 10 Pin, Straight Connector 
6 Feet Long 
Compatible with LDT's 950MD C2, 951 S, 952 S, 952QD S, 953A E, 953D E & 953SSI E 
With Connector option "S" & "E" as shown above 
Other lengths available, add $ 4.00 / FT 
Part AME-SD0439700L6 
[Amazon] 1/17 
(2LBS) H 4" L 10" W 10" Box
0 $85.00
4 AME-SD0436700L6 Ametek Gemco Cable Assembly for a 950 Mill Duty LDT Housing with option for MS Style Connector by 6 Feet Long. Longer lengths are available, add $ 2.00 / for each additional Foot and change part number - 0 $43.00
5 AME-SD0436000L6 Ametek Gemco Cable Assembly for a 950A / 950TP Mill Duty LDT Housing with option for MS Style Connector by 6 Feet Long. Longer lengths are available, add $ 2.00 / for each additional Foot and change part number - 0 $43.00
 

950MD Mill Duty Housing LDT
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-950MD-12A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-12A-0B-0C-X-R 
12A = 12 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" Tube 
[Amazon]
- 6 $1,241.00
2 AME-950MD-08A-0B-0C-C3-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-08A-0B-0C-C3-B1 
08A = 08 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C3 = 5 Pin, 12mm, Euro Connector on the side of the housing 
B1 = Protective Boot, Neoprene Coated Nylon, -60F to +250 F  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,159.00
3 AME-950MD-118A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-118A-0B-0C-X-X 
118A = 118.0 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,301.00
4 AME-950MD-11A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-11A-0B-0C-X-X 
11A = 11 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $968.00
5 AME-950MD-128A-0B-0C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers model 950MD-128A-0B-0C-X-B1 
128A = 128 Inches of Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B1 = Protective Boot. Neoprene coated Nylon, -60 to 250 Degrees F  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 136" W 6" 
Motor Freight Only 
[Amazon]
0 $2,276.37
6 AME-950MD-12A-0.5B-0.5C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Part 950MD-12A-0.5B-0.5C-C2-X 
12A = 12 Inch Active Stroke 
0.5B = 0.5 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0.5C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on the Side of the Housing, 951 & 952 
X = No other options  
Mill Duty Housing - The Gemco 950MD Mill-Duty Housing is a stainless steel housing designed to protect LDTs in harsh or high temperature environments such as those found in heavy industrial plants and processes 
In addition, it is also used where Nema 4 protection is required or where mounting limitations exist 
(35LBS) H 6" L 30" W 6" Box 
[Amazon]
0 $1,224.21
7 AME-950MD-12A-0B-0C-X-B2-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers model 950MD-12A-0B-0C-X-B2-R-F 
12A = 12 Inches of Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B2 = Protective Boot. Silicone Coated Fiberglass, -100 to 550 Degrees F 
R = Rear Mount Spherical Rod End 3/4 Inch 
F = Front Mount Spherical Rod End 3/4 Inch 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,500.00
8 AME-950MD-12A-0B-0C-XRSFS Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-12A-0B-0C-X RS-FS 
12A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch Conduit Fitting 
RS = Stainless Steel Rear Mount Spherical Rod End 3/4 Inch with 304 Stainless Steel Mounting Bolt 
FS = Stainless Steel Front Mount Spherical Rod End 3/4 Inch with 304 Stainless Steel Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,609.72
9 AME-950MD-12A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-12A-0B-0C-X-X 
12A = 12 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $968.00
10 AME-950MD-144A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-114A-0B-0C-X-R 
144A = Active Stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,544.00
11 AME-950MD-14A-0B-0C-B1-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-14A-0B-0C-C2-B1-R 
14A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 = Environmental MS Connector and Mate on Side of Housing 
B1 = Protective Boot - Neoprene Coated Nylon -60 to 250 Degrees F 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,475.00
12 AME-950MD-14A-0B-0C-C2-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-14A-0B-0C-C2-R 
14A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on Side of Housing 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,315.00
13 AME-950MD-14A-0B-0C-C5D-SB Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-14A-0B-0C-C5D-SB 
14A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C5D = 10 Pin STD - to 953D 6 Pin Euro Connector 
SB = 304 Stainless Steel Boot  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,532.00
14 AME-950MD-14A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-14A-0B-0C-X-R 
14A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,205.00
15 AME-950MD-14A-1B-1C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-14A-1B-1C-C2-C2-X 
14A = Active stroke in Inches 
1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches 
1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches 
C2 = Environmental MS Connector and Mate on Side of Housing 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,115.00
16 AME-950MD-15A-0B-0C-C5A Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-15A-0B-0C-C5A 
15A = Active Stroke in Inches 
0B = 0 Inches of Overstroke / Fully Retracted  
0C = 0 Inches of Overstroke / Fully Extended  
C5A = Connector - 10 Pin STD - to 953A 5 Pin Euro 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,115.00
17 AME-950MD-15A-1B-1C-C2-B1-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-15A-1B-1C-C2-B1-R-F 
15A = 15 Inch Active Stroke 
1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches 
1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches 
C2 = Environmental MS Connector * Mate on the Side of the Housing 
B1 = Protective Boot, Neoprene Coated Nylon, -60F to +250 F  
Protects the LDT from physical & environmental damage 
R = Rear Mount, Spherical Rod End by 3/4 Inch 
F = From Mount, Spherical Rod End by 3/4 Inch 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,698.00
18 AME-950MD-15A-1B-1C-C2-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-15A-1B-1C-C2-R-F 
15A = 15 Inch Active Stroke 
1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches 
1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches 
C2 = Environmental MS Connector * Mate on the Side of the Housing 
Protects the LDT from physical & environmental damage 
R = Rear Mount, Spherical Rod End by 3/4 Inch 
F = From Mount, Spherical Rod End by 3/4 Inch 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,538.00
19 AME-950MD-16.5A-0B-0C-C3-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-16.5A-0B-0C-C3-B1 
16.5A = 16.5 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Inches Overstroke / Fully Extended Overstroke in Inches 
C3 = 5 Pin, 12mm, Euro Connector on side of housing for 952A and 953A with connector option "S"  
B1 = Protective Boot, Neoprene Coated Nylon, -60 F to +250 F  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,304.00
20 AME-950MD-16A-0B-0C-C4-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-16A-0B-0C-C4-B1 
16A = 16 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C4 = Euro Connector on side of housing, 5 Pin, 12mm 
B1 = Protective Boot, Neoprene Coated Nylon, -60F to +250 F  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,275.00
21 AME-950MD-16A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-16A-0B-0C-X-X 
16A = 16 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,005.00
22 AME-950MD-16A-2B-2C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-16A-2B-2C-X-B1 
16A = 16 Inch Active Stroke 
2B = 2 Inch Overstroke / Fully Retracted Overstroke in Inches 
2C = 2 Inch Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B1 = Protective Boot. Neoprene coated Nylon, -60 to 250 Degrees F  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" Tube 
[Amazon]
0 $1,242.00
23 AME-950MD-17.7A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-17.7A-0B-0C-C-R 
17.7A = 17.7 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C = MS Style Connector and Mate on Side of Housing 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,315.00
24 AME-950MD-18A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-18A-0B-0C-X-R 
18A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,205.00
25 AME-950MD-18A-0B-0C-X-RF Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-18A-0B-X-RF 
18A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
RF = Front & Rear Mount Spherical Rod Ends have been specified. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,354.00
26 AME-950MD-200A-0B-0C-C3-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-200A-0B-0C-C3-X 
200A = 200 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C3 = 5 Pin, 12mm, Euro Connector on Side of Housing  
X = No other options 
(35LBS) H 6" L 30" W 6" 
[Amazon]
9 $1,670.00
27 AME-950MD-200A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-200A-0B-0C-X-X-X 
200A = 200 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,560.00
28 AME-950MD-20A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-20A-0B-0C-X-R 
20A = 20 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,205.00
29 AME-950MD-21.5A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-21.5A-0B-0C-X-X 
21.5A = 21.5 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,005.00
30 AME-950MD-23.6-OB-OC-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-23.6A-0B-0C-X-R 
23.6A = Active Stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,205.00
31 AME-950MD-23A-18.4B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-23A-18.4B-0C-X-X 
23A = 23 Inch Active Stroke 
18.4B = 18.4 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 5 Inches Overstroke / Fully Extended Overstroke in Inches 
X= Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,079.00
32 AME-950MD-23A-1B-1C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-23A-1B-1C-C2-X 
23A = 23 Inch Active Stroke / Travel 
1B = 1 Inch Fully Retracted Overstroke in Inches 
1C = 1 Inch Fully Extended Overstroke in Inches 
C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only 
X = No Mounting or Extreme Condition Options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,189.00
33 AME-950MD-24A-0.5B-0.5C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-24A-0.5B-0.5C-C2-X 
24A = 24 Inch Active Stroke 
0.5B = 0.5 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0.5C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on the Side of the Housing, 951 & 952 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,189.00
34 AME-950MD-24A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-24A-0B-0C-C2-X 
24A = 24 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2X = C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,115.00
35 AME-950MD-24A-0B-0C-X-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-24A-0B-0C-X-F 
24A = 24 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,269.00
36 AME-950MD-24A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-24A-0B-0C-X-X 
24A = 24 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,005.00
37 AME-950MD-26A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-26A-0B-0C-X-X 
26A = 26 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,042.00
38 AME-950MD-27A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-27A-0B-0C-C2-X 
27A = 27 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 = Environmental MS connector and mate on side of the housing, specify the Gemco LDT to be used or other 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,210.86
39 AME-950MD-27A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-27A-0B-0C-X-X 
27A = 27 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,042.00
40 AME-950MD-28A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-28A-0B-0C-X-X 
28A = 28 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,042.00
41 AME-950MD-28A-1B-1C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-28A-1B-1C-C2-X 
28A = 28 Inch Active Stroke 
1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches 
1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees (30LBS) 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,226.00
42 AME-950MD-29A-0B-0C-X-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-29A-0B-0C-X-R-F 
29A = 29 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,391.00
43 AME-950MD-30A-0B-0C-C-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-30A-0B-0C-C-X 
30A = 30 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C = MS Style Connector and Mate on the Side of the Housing, for old 950 LDT 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,152.00
44 AME-950MD-30A-0B-0C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-30A-0B-0C-X-B1 
30A = 30 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F 
Protects the LDT for resistance to water and oil. 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,282.00
45 AME-950MD-30A-0B-0C-X-B3 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-30A-0B-0C-X-B3 
30A = 30 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B3 = Protective Boot - Teflon Coated Fiberglass  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,878.00
46 AME-950MD-31A-0B-0C-C4-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-31A-0B-0C-C4-R 
31A = 31 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C4 = 6 Pin, 12mm, Euro Connector Side of Housing  
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,383.00
47 AME-950MD-32A-0B-0C-C2-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-32A-0B-0C-C2-F 
32A = 32 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and mate on Side of Housing 951 & 952 LDT's only 
F = F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,301.00
48 AME-950MD-32A-0B-0C-X-B2-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers model 950MD-32A-0B-0C-X-B2-R-F 
32A = 32 Inches of Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B2 = Protective Boot. Silicone Coated Fiberglass, -100 to 550 Degrees F 
R = Rear Mount Spherical Rod End 3/4 Inch 
F = Front Mount Spherical Rod End 3/4 Inch 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,940.00
49 AME-950MD-32A-2B-2C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-32A-2B-2C-X-X 
32A = 32 Inch Active Stroke 
2B = 2 Overstroke / Fully Retracted Overstroke in Inches 
2C = 2 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other mounting options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,116.00
50 AME-950MD-33A-1B-1C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-33A-1B-1C-C2-X 
33A = Active stroke in Inches 
1B = 1 Inch Fully Retracted Overstroke in Inches 
1C = 1 Inch Fully Extended Overstroke in Inches 
C2 = MS Style Connector and mate on Side of Housing (951 & 952 LDT's only) 
X = No Mounting or Extreme Condition Options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,226.00
51 AME-950MD-34A-0B-0C-X-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-34A-0B-0C-X-F 
34A = 34 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees. The Front mount also has a Spherical Rod End by 3/4 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,191.00
52 AME-950MD-36A-0B-0C-C2-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-36A-0B-0C-C2-R 
36A = 36 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on Side of Housing 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications.The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,352.00
53 AME-950MD-36A-0B-0C-C3-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-36A-0B-0C-C3-X 
11A = 11 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C3 = 5 Pin, 12mm, Euro Connector on the Side of the Housing 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,152.00
54 AME-950MD-36A-0B-0C-C-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-36A-0B-0C-C-X 
36A = 36 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C = MS Style Connector and Mate on the Side of the Housing, for old 950 LDT 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,152.00
55 AME-950MD-36A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-36A-0B-0C-X-R 
36A = 36 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications.The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,242.00
56 AME-950MD-36A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-36A-0B-0C-X-X 
36A = 36 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other mounting options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,042.00
57 AME-950MD-37A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-37A-0B-0C-C2-X 
37A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on Side of Housing 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,268.00
58 AME-950MD-38A-0B-0C-B1-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-38A-0B-0C-C2-B1-R 
38A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 = Environmental MS Connector and Mate on side of housing 
B1 = Protective Boot - Neoprene Coated Nylon -60 to 250 Degrees F 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,709.00
59 AME-950MD-38A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-38A-0B-0C-X-X 
38A = 38 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,079.00
60 AME-950MD-40A-0B-0C-C3-SB Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-40A-0B-0C-C3-SB 
40A = 40 Inch Active Stroke / Travel 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C3 = 5 Pin, 12mm, Euro Connector on the Side of the Housing 
SB = 304 Stainless Steel Boot (33LBS) 76 X 5.5 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,766.00
61 AME-950MD-40A-0B-0C-C-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-40A-0B-0C-C-R-F 
40A = 40 Inch Active Stroke / Travel 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C = MS Style Connector and Mate on Side of Housing  
R = Rear mount spherical rod end 3/4? 
F = Front mount spherical rod end 3/4? 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,538.00
62 AME-950MD-41.47A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-41.47A-0B-0C-C-R 
41.47A = 41.47 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C = MS Style Connector and Mate on Side of Housing 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,389.00
63 AME-950MD-41.5A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-41.5A-0B-0C-X-R 
41.5A = Active Stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,279.00
64 AME-950MD-43A-0B-0C-C3-X Ametek Gemco 950 Mill Duty LDT Housing 
Protects the LDT from physical & environmental damage. 
The housing and body are manufactured from 304 stainless steel. 
Model 950MD-43A-0B-0C-C3-X 
43A = 43 Inch Active Stroke / Travel 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C3 = C3 = 5 Pin, 12mm, Euro Connector on Side of Housing 
For 952A / 953A LDT's with Connector Option "S" 
X = No Mounting or Extreme Condition Options  
[Amazon] Dated 1/17 
(35LBS) H 6" L 47" W 6" Tube
3 $1,268.00
65 AME-950MD-43A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-43A-0B-0C-X-R 
43A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,279.00
66 AME-950MD-45A-0B-0C-X-B3-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-45A-0B-0C-X-B3-R 
45A = 45 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
B3 = Protective Boot, Teflon Coated Fiberglass, -100F to +500 F 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End, 3/4 Inch I.D.  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $2,291.00
67 AME-950MD-45A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-45A-0B-0C-X-R 
45A = 45 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End, 3/4 Inch I.D. 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,279.00
68 AME-950MD-45A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-45A-0B-0C-X-X 
45A = 45 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other mounting options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,079.00
69 AME-950MD-46A-0B-0C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-46A-0B-0C-X-B1 
46A = 46 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F 
Protects the LDT for resistance to water and oil. 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,399.00
70 AME-950MD-46A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-46A-0B-0C-X-R 
46A = Active stroke in Inches 46" 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,279.00
71 AME-950MD-47.2A-0B-0C-X-B1R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-47.2A-0B-0C-X-BR1 
47.2 = 47.244 / 1200 Millimeters Active Stroke 
0B = Fully retracted Overstroke 0 
0C = Fully extended Overstroke 0 
X= Standard 1/2 Inch NPT Conduit Fitting 
BR1 = Boot / Protective Boot, neoprene coated nylon -60 to 250 degrees F  
R = Rear Mount Spherical Rod End 3/4 Inch  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,641.08
72 AME-950MD-48A-0B-0C-X-L Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-48A-0B-0C-X-L 
48A = 48 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
L = Delrin Liner for extened life cycle on horizontal applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,127.00
73 AME-950MD-50A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-50A-0B-0C-C2-X 
23A = 23 Inch Active Stroke / Travel 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only 
X = No Mounting or Extreme Condition Options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,226.00
74 AME-950MD-54A-0B-0C-C4-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-54A-0B-0C-C4-R 
54A = 54 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C4 = 6 Pin, 12mm, Euro Connector Side of Housing  
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,461.00
75 AME-950MD-54A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-54A-0B-0C-X-X 
54A = 54 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,116.00
76 AME-950MD-56A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-56A-0B-0C-X-X 
56A = 56 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,116.00
77 AME-950MD-6.3A-0B-0C-C5A-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-6.3A-0B-0C-C5A-R 
6.3A = 6.3 Inches of Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C5A = 10 Pin STD to 953A 5 Pin Euro 
R = Rear Mount Spherical Rod End by 3/4 Inch I.D.  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,278.00
78 AME-950MD-60.3A-0B-0C-C5A-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-60.3A-0B-0C-C5A-R 
60.3A = 60.3 Inches of Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C5A = 10 Pin STD to 953A 5 Pin Euro 
R = Rear Mount Spherical Rod End by 3/4 Inch I.D.  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,463.00
79 AME-950MD-60A-0B-0C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-60A-0B-0C-X-B1 
60A = 60 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F 
Protects the LDT for resistance to water and oil. 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,553.00
80 AME-950MD-60A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-60A-0B-0C-X-R 
60A = 60 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,353.00
81 AME-950MD-60A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-60A-0B-0C-X-X 
60A = 60 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,116.00
82 AME-950MD-66.5A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-66.5A-0B-0C-C2-X 
665A = 66.5 Inches of Active Stroke 
0B = 0 Inch Fully Retracted Overstroke 
0C = 0 Inch Fully Extended Overstroke 
C2 = MS Style Connector and mate on Side of Housing (951 & 952 LDT's only) 
X = No Mounting or Extreme Condition Options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,263.00
83 AME-950MD-66.5A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-66.5A-0B-0C-X-X 
665A = 66.50 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other mounting options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,153.00
84 AME-950MD-66A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-66A-0B-0C-C2-X 
66A = 66 Inch Active Stroke / Travel 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only 
X = No Mounting or Extreme Condition Options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,263.00
85 AME-950MD-6A-0B-0C-C2-R-F-B3 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-6A-0B-0C-C2-R-F-B3 
6A = 6 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C2 = Environmental MS Style Connector and Mate on the Side of the Housing 
R = Rear Mount Spherical Rod End 3/4 Inch 
F = Front Mount Spherical Rod End by 3/4 Inch 
B3 = Protective Boot, Teflon Coated Fiberglass, -100 to 500 Degrees F 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,680.00
86 AME-950MD-72A-0B-0C-C2-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-72A-0B-0C-C2-B1 
72A = 72 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 = 2 Inch Overstroke / Fully Extended Overstroke in Inches 
B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F 
Protects the LDT for resistance to water and oil. 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,743.00
87 AME-950MD-7A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-7A-0B-0C-C2-X 
7A = 7 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on the Side of the Housing, 951 & 952 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,078.00
88 AME-950MD-80A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-80A-0B-0C-X-X 
80A = 80 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,190.00
89 AME-950MD-82A-1B-1C-X-RF Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-82A-1B-1C-X-RF 
82A = 82 Inch Active Stroke 
1B = 1.0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
1C = 1.0 Inches Overstroke / Fully Extended Overstroke in Inches 
X = Environmental MS Style Connector and Mate on the Side of the Housing 
R = Rear Mount Spherical Rod End 3/4 Inch ID 
F = Front Mount Spherical Rod End 3/4 Inch ID 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,723.00
90 AME-950MD-84A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-84A-0B-0C-X-R 
84A = 84 Inches of Active Stroke 
0B = 0 Inch Fully Retracted Overstroke 
0C = 0 Inch Fully Extended Overstroke 
X = Standard 1/2 Inch conduit Fitting 
R = Rear Mount Spherical Rod end 3/4 inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,390.00
91 AME-950MD-87A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-87A-0B-0C-X-R 
87A = 87 Inches of Active Stroke 
0B = 0 Inch Fully Retracted Overstroke 
0C = 0 Inch Fully Extended Overstroke 
X = Standard 1/2 Inch conduit Fitting 
R = Rear Mount Spherical Rod end 3/4 inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,427.00
92 AME-950MD-9.84A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-9.84A-0B-0C-C-R 
9.84A = 9.84 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C = MS Style Connector and Mate on Side of Housing 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,278.00
93 AME-950MD-91A-1B-1C-C2-X Ametek Gemco Mill Duty Housing for LDT's 
Model 950MD-90.5A-1B-1C-C2-X 
90.5A = 90.5 Inch Active Stroke / Travel 
1B = 1 Inch Fully Retracted Overstroke in Inches 
1C = 1 Inch Fully Extended Overstroke in Inches 
C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only 
X = No Mounting or Extreme Condition Options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications 
[Amazon] 
(35LBS) H 6" L 96" W 6" Tube
0 $1,448.13
94 AME-950MD-98A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-98A-0B-0C-X-R 
98A = 98.0 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch 
(35LBS) H 6" L 30" W 6" 
[Amazon]
0 $1,464.00
Secure Online Order
 

 
Secure Online Order
 
14,111 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 

Click to visit our Amazon store
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate
 
Frequently Sold
Replacement Parts
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 Worm Gear RLS
  • 2000 Spur Gear RLS
  • 2000 Heavy Duty RLS
  • 2006 K Type RLS, 2 Circuit
  • 2006 K Type RLS, 4 Circuit
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
  • ECPT10 Pressure Transducer
  • PST360 Pressure Transducer
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
Catrac Cable & Hose Carrier

Catrac
 
Catrac Cable & Hose Carrier Products
 
JLG Replacement Parts
 
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985