Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,160 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,370 part numbers: Motion Control Products     GLEASON 18,099 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,228 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 925 part numbers: Electrical Control Products   HUBBELL 8,289 part numbers: Electrical Control Products     RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

Linear Displacement Transducers 950MD Mill Duty Housing LDT   DESCRIPTION   Mill Duty Housing - The Gemco 950MD Mill-Duty Housing is a stainless steel housing designed to protect LDTs in harsh or high temperature environments such as those found in heavy industrial plants and processes. In addition, it is also used where Nema 4 protection is required or where mounting limitations exist.   • Gemco Ordering Guide • 950MD Manual • Magnets, Cables and Connector Styles         950 MD Accessories No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-04578009 Ametek Gemco Vortex Cooler  Part 04578009  950MD  Dated 10-2021 - 0 $976.00 2 AME-04578010 Ametek Gemco Muffler  Part 04578010  For the Vortex Cooler  On a 950MD  Dated 10-2021 - 0 $17.00 3 AME-04521262 Ametek Gemco Replacement (Male Connector) for Option C Connector; Product line: 950MD  Dated 10-2021 - 0 $63.00 4 AME-04521261 Ametek Gemco Female Mating Connector for Option C Connector; Product line: 950MD  Dated 10-2021 - 0 $63.00 5 AME-04570140 Ametek Gemco Spherical Rod End  Part 04570140  1/2 Inch Front Spherical Rod End  For an MD950 Mill Duty Housing  Dated 10-2021 - 0 $50.00 6 AME-C0903400 Ametek Gemco Bracket  Part C0903400  Guide Tube Support Bracket  Provided with 950 Mill Duty Housings with Strokes Over 72 Inches  Increases Rigidity of the Housing Assembly  Interference Fit to Housing  Ships in 1 Week, Peck MI  Dated 01-2023 - 0 $54.00 7 AME-04521407 Ametek Gemco Replacement (Male Connector) for Option C2 Connector, 10 Pin; Product line: 950MD  Dated 10-2021 - 0 $68.00 8 AME-04521372 Ametek Gemco Connector  AME-SD04521372  Mating Connector  For 951, 952, 952QD, 953A, 953D LDT's  With the "E" Connector Configuration  Female 10 Pin  Dated 10-2021  (1LB) H 4" L 4" W 4" Box 2 $59.00 9 AME-SD0448800 Ametek Gemco Head & Cable Assembly  Part SD0448800  For 951 and 952 LDT's  For changing from a 950 to a 951 or 952 LDT  With a 10 Pin Quick Disconnect  Ships from Stock to 10 Days  Dated 10-2021 - 1 $253.00 10 AME-SD0501900 Ametek Gemco Water Cooled Jacket for 951, 952, 953 Head Assembly; Product line: 950MD  Dated 10-2021 - 0 $2,219.00 11 AME-04521568 Ametek Gemco Male Connector 950MD  Part 04521568  Male Connector  For Option C3  12mm 5 Pin  Ships in 5 Days, Peck MI  Dated 10-2021  (1LB) H 4" L 6" W 4" Box - 0 $59.00 12 AME-M0761900 Ametek Gemco Piston Bearing  Part M0761900  Part for a 950 Mill Duty Housing  Ships in 10 Days, Peck MI  Dated 10-2021  (1LB) H 4" L 8" W 4" Box - 0 $457.00 13 AME-SD0452400 Ametek Gemco Piston & Magnet Sub Assembly  Part SD0452400  For a 950MD Housing  Ships in 2 to 3 Weeks, Peck MI  Dated 02-2025  (1LB) H 4" L 8" W 4" Box - 0 $550.00 950, 951, 952 and 953 LDT Cable Assemblies No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-949013L6 Ametek Gemco Cable & Connector Assembly  Part 949013L6  For a 950MD, 952A or 953A with connector option "S"  C3 Connector  5 Pin 12mm  6 Feet Long  Normally a Stock Item @ BPI  Ship from Stock to 2 Weeks  Dated 06-2025  (2LBS) H 2" L 5" W 5" Box 3 $63.00 2 AME-949031L6 Ametek Gemco Cable & Connector Assembly by 6 Feet Long for a 950MD. 6 Pin Straight 12mm Euro with a Stainless Steel Coupling Nut, Shielded  Dated 10-2021 - 0 $81.00 3 AME-SD0439700L6 Ametek Gemco Cable Connector Assembly  Part SD0439700L6  For a Rod Style LDT  With a 10 Pin, Straight Connector  6 Feet Long  Compatible with LDT's 950MD C2, 951 S, 952 S, 952QD S, 953A E, 953D E & 953SSI E  With Connector option "S" & "E" as shown above  Other lengths available, add $ 4.00 / FT  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2025  (2LBS) H 4" L 10" W 10" Box 3 $171.00 4 AME-SD0436700L6 Ametek Gemco Cable Assembly for a 950 Mill Duty LDT Housing with option for MS Style Connector by 6 Feet Long. Longer lengths are available, add $ 2.00 / for each additional Foot and change part number - 0 $46.44 5 AME-SD0436000L6 Ametek Gemco Cable Assembly for a 950A / 950TP Mill Duty LDT Housing with option for MS Style Connector by 6 Feet Long. Longer lengths are available, add $ 2.00 / for each additional Foot and change part number - 0 $46.44   950MD Mill Duty Housing LDT No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-950MD-12A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-12A-0B-0C-X-R  12A = 12 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6" Tube  - 0 $1,340.28 2 AME-950MD-08A-0B-0C-C3-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-08A-0B-0C-C3-B1  08A = 08 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on the side of the housing  B1 = Protective Boot, Neoprene Coated Nylon, -60F to +250 F   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,251.72 3 AME-950MD-118A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-118A-0B-0C-X-X  118A = 118.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,405.08 4 AME-950MD-11A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-11A-0B-0C-X-X  11A = 11 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,045.44 5 AME-950MD-128A-0B-0C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers model 950MD-128A-0B-0C-X-B1  128A = 128 Inches of Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B1 = Protective Boot. Neoprene coated Nylon, -60 to 250 Degrees F   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 136" W 6"  Motor Freight Only  0 $2,458.48 6 AME-950MD-12A-0.5B-0.5C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Part 950MD-12A-0.5B-0.5C-C2-X  12A = 12 Inch Active Stroke  0.5B = 0.5 Inches of Overstroke / Fully Retracted Overstroke in Inches  0.5C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and Mate on the Side of the Housing, 951 & 952  X = No other options   Mill Duty Housing - The Gemco 950MD Mill-Duty Housing is a stainless steel housing designed to protect LDTs in harsh or high temperature environments such as those found in heavy industrial plants and processes  In addition, it is also used where Nema 4 protection is required or where mounting limitations exist  (35LBS) H 6" L 30" W 6" Box  [Amazon] 0 $1,322.15 7 AME-950MD-12A-0B-0C-X-B2-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers model 950MD-12A-0B-0C-X-B2-R-F  12A = 12 Inches of Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B2 = Protective Boot. Silicone Coated Fiberglass, -100 to 550 Degrees F  R = Rear Mount Spherical Rod End 3/4 Inch  F = Front Mount Spherical Rod End 3/4 Inch  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,620.00 8 AME-950MD-12A-0B-0C-XRSFS Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-12A-0B-0C-X RS-FS  12A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch Conduit Fitting  RS = Stainless Steel Rear Mount Spherical Rod End 3/4 Inch with 304 Stainless Steel Mounting Bolt  FS = Stainless Steel Front Mount Spherical Rod End 3/4 Inch with 304 Stainless Steel Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,738.50 9 AME-950MD-12A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-12A-0B-0C-X-X  12A = 12 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,278.56 10 AME-950MD-144A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-114A-0B-0C-X-R  144A = Active Stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  0 $1,667.52 11 AME-950MD-14A-0B-0C-B1-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-14A-0B-0C-C2-B1-R  14A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector and Mate on Side of Housing  B1 = Protective Boot - Neoprene Coated Nylon -60 to 250 Degrees F  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  0 $1,593.00 12 AME-950MD-14A-0B-0C-C2-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-14A-0B-0C-C2-R  14A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and Mate on Side of Housing  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  0 $1,420.20 13 AME-950MD-14A-0B-0C-C5D-SB Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-14A-0B-0C-C5D-SB  14A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C5D = 10 Pin STD - to 953D 6 Pin Euro Connector  SB = 304 Stainless Steel Boot   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,654.56 14 AME-950MD-14A-0B-0C-X-R Ametek Gemco Mill Duty Housing for LDT's  Model 950MD-14A-0B-0C-X-R  aka 950MD14A0B0CXR  Protects the LDT from physical & environmental damage  The housing and body are manufactured from 304 stainless steel  A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  The Front mount also has a Spherical Rod End by 1/2 Inch  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Ships in 3 Weeks  14A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Dated 1-19  (35LBS) H 6" L 20" W 6" Tube 0 $1,453.68 15 AME-950MD-14A-1B-1C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-14A-1B-1C-C2-C2-X  14A = Active stroke in Inches  1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches  1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector and Mate on Side of Housing  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,204.20 16 AME-950MD-15A-0B-0C-C5A Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-15A-0B-0C-C5A  15A = Active Stroke in Inches  0B = 0 Inches of Overstroke / Fully Retracted   0C = 0 Inches of Overstroke / Fully Extended   C5A = Connector - 10 Pin STD - to 953A 5 Pin Euro  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,204.20 17 AME-950MD-15A-1B-1C-C2-B1-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-15A-1B-1C-C2-B1-R-F  15A = 15 Inch Active Stroke  1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches  1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector * Mate on the Side of the Housing  B1 = Protective Boot, Neoprene Coated Nylon, -60F to +250 F   Protects the LDT from physical & environmental damage  R = Rear Mount, Spherical Rod End by 3/4 Inch  F = From Mount, Spherical Rod End by 3/4 Inch  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,833.84 18 AME-950MD-15A-1B-1C-C2-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-15A-1B-1C-C2-R-F  15A = 15 Inch Active Stroke  1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches  1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector * Mate on the Side of the Housing  Protects the LDT from physical & environmental damage  R = Rear Mount, Spherical Rod End by 3/4 Inch  F = From Mount, Spherical Rod End by 3/4 Inch  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,661.04 19 AME-950MD-16.5A-0B-0C-C3-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-16.5A-0B-0C-C3-B1  16.5A = 16.5 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Inches Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on side of housing for 952A and 953A with connector option "S"   B1 = Protective Boot, Neoprene Coated Nylon, -60 F to +250 F   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,408.32 20 AME-950MD-16A-0B-0C-C4-B1 Ametek Gemco Mill Duty Housing 950MD  Model 950MD-16A-0B-0C-C4-B1  Part 950MD16A0B0CC4B1  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.   A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly.  The Front mount has a Spherical Rod End by 1/2 Inch.  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  16A = 16.0 Inch Active Stroke  0B = 0 Inch Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Inch Overstroke / Fully Extended Overstroke in Inches  C4 = Euro Connector on side of housing, 5 Pin, 12mm  B1 = Protective Boot, Neoprene Coated Nylon, -60F to +250 F   A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly.  The Front mount has a Spherical Rod End by 1/2 Inch.  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  Ships in 10 Weeks, Peck MI  Dated 01-2023  (35LBS) H 6" L 30" W 6" Cardboard Tube 0 $1,377.00 21 AME-950MD-16A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-16A-0B-0C-X-X  16A = 16 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,085.40 22 AME-950MD-16A-2B-2C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-16A-2B-2C-X-B1  16A = 16 Inch Active Stroke  2B = 2 Inch Overstroke / Fully Retracted Overstroke in Inches  2C = 2 Inch Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B1 = Protective Boot. Neoprene coated Nylon, -60 to 250 Degrees F   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6" Tube  [Amazon] 0 $1,341.36 23 AME-950MD-17.7A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-17.7A-0B-0C-C-R  17.7A = 17.7 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C = MS Style Connector and Mate on Side of Housing  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,420.20 24 AME-950MD-18A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-18A-0B-0C-X-R  18A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,301.40 25 AME-950MD-18A-0B-0C-X-RF Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-18A-0B-X-RF  18A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  RF = Front & Rear Mount Spherical Rod Ends have been specified. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,462.32 26 AME-950MD-200A-0B-0C-C3-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-200A-0B-0C-C3-X  200A = 200 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on Side of Housing   X = No other options  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,803.60 27 AME-950MD-200A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-200A-0B-0C-X-X-X  200A = 200 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,684.80 28 AME-950MD-20A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-20A-0B-0C-X-R  20A = 20 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,301.40 29 AME-950MD-21.5A-0B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-21.5A-0B-0C-X-X  21.5A = 21.5 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,085.40 30 AME-950MD-23.6-OB-OC-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-23.6A-0B-0C-X-R  23.6A = Active Stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,301.40 31 AME-950MD-23A-18.4B-0C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-23A-18.4B-0C-X-X  23A = 23 Inch Active Stroke  18.4B = 18.4 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 5 Inches Overstroke / Fully Extended Overstroke in Inches  X= Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,165.32 32 AME-950MD-24A-0.5B-0.5C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-24A-0.5B-0.5C-C2-X  24A = 24 Inch Active Stroke  0.5B = 0.5 Inches of Overstroke / Fully Retracted Overstroke in Inches  0.5C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and Mate on the Side of the Housing, 951 & 952  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $1,959.36 33 AME-950MD-24A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-24A-0B-0C-C2-X  24A = 24 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2X = C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $1,954.00 34 AME-950MD-24A-0B-0C-X-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-24A-0B-0C-X-F  24A = 24 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,022.00 35 AME-950MD-27A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-27A-0B-0C-C2-X  27A = 27 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS connector and mate on side of the housing, specify the Gemco LDT to be used or other  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $1,970.75 36 AME-950MD-28A-1B-1C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-28A-1B-1C-C2-X  28A = 28 Inch Active Stroke  1B = 1 Inch Overstroke / Fully Retracted Overstroke in Inches  1C = 1 Inch Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees (30LBS)  Dated 01-2024  (35LBS) H 6" L 30" W 6"    0 $1,986.83 37 AME-950MD-29A-0B-0C-X-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-29A-0B-0C-X-R-F  29A = 29 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,400.14 38 AME-950MD-30A-0B-0C-C-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-30A-0B-0C-C-X  30A = 30 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  C = MS Style Connector and Mate on the Side of the Housing, for old 950 LDT  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  (35LBS) H 6" L 30" W 6"  0 $1,244.16 39 AME-950MD-30A-0B-0C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-30A-0B-0C-X-B1  30A = 30 Inch Active Stroke  0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F  Protects the LDT for resistance to water and oil.  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $1,938.50 40 AME-950MD-30A-0B-0C-X-B3 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-30A-0B-0C-X-B3  30A = 30 Inch Active Stroke  0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B3 = Protective Boot - Teflon Coated Fiberglass   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,235.50 41 AME-950MD-31A-0B-0C-C4-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-31A-0B-0C-C4-R  31A = 31 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C4 = 6 Pin, 12mm, Euro Connector Side of Housing   R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,342.86 42 AME-950MD-32A-0B-0C-C2-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-32A-0B-0C-C2-F  32A = 32 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and mate on Side of Housing 951 & 952 LDT's only  F = F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,259.89 43 AME-950MD-32A-0B-0C-X-B2-R-F Ametek Gemco Mill Duty Housing for a Linear Displacement Transducer  Part 950MD-32A-0B-0C-X-B2-R-F  950MD32AOBOCXB2RF  32A = 32 Inches of Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B2 = Protective Boot. Silicone Coated Fiberglass, -100 to 550 Degrees F  R = Rear Mount Spherical Rod End 3/4 Inch  F = Front Mount Spherical Rod End 3/4 Inch  Protects the LDT from physical & environmental damage.  The housing and body are manufactured from 304 stainless steel.  A Rulon bearing assembly offers wear resistance  and temperature immunity for the actuator assembly.  Other options available, LDT sold seperataly  Ships in 8 Weeks, Peck MI  Dated 01-2024  (35LBS) H 6" L 38" W 6" Cardboard Tube 0 $2,737.89 44 AME-950MD-32A-2B-2C-X-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-32A-2B-2C-X-X  32A = 32 Inch Active Stroke  2B = 2 Overstroke / Fully Retracted Overstroke in Inches  2C = 2 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other mounting options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $1,828.67 45 AME-950MD-33A-1B-1C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-33A-1B-1C-C2-X  33A = Active stroke in Inches  1B = 1 Inch Fully Retracted Overstroke in Inches  1C = 1 Inch Fully Extended Overstroke in Inches  C2 = MS Style Connector and mate on Side of Housing (951 & 952 LDT's only)  X = No Mounting or Extreme Condition Options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,138.25 46 AME-950MD-34A-0B-0C-X-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-34A-0B-0C-X-F  34A = 34 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees. The Front mount also has a Spherical Rod End by 3/4 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,077.61 47 AME-950MD-36A-0B-0C-C2-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-36A-0B-0C-C2-R  36A = 36 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and Mate on Side of Housing  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications.The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,371.00 48 AME-950MD-36A-0B-0C-C3-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-36A-0B-0C-C3-F  950MD = Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel.  A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly.  The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  36A = 36 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on the Side of the Housing  X = No other options   Ships in 3 Weeks, Peck MI  Dated 01-2024  (35LBS) H 6" L 40" W 6" Carboard Tube 0 $2,021.00 49 AME-950MD-36A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-36A-0B-0C-X-R  36A = 36 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications.The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,178.00 50 AME-950MD-37A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-37A-0B-0C-C2-X  aka 950MD37A0B0CC2X  Protects the LDT from physical & environmental damage  The housing and body are manufactured from 304 stainless steel  A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head  The Front mount also has a Spherical Rod End by 1/2 Inch  Which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  37A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and Mate on Side of Housing  X = No other options   Ships in 3 to 4 Weeks  Dated 01-2024  (35LBS) H 6" L 40" W 6" Carboard Tube 0 $2,026.36 51 AME-950MD-38A-0B-0C-B1-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-38A-0B-0C-C2-B1-R  38A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Connector and Mate on side of housing  B1 = Protective Boot - Neoprene Coated Nylon -60 to 250 Degrees F  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,333.39 52 AME-950MD-40A-0B-0C-C3-SB Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-40A-0B-0C-C3-SB  40A = 40 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = 5 Pin, 12mm, Euro Connector on the Side of the Housing  SB = 304 Stainless Steel Boot   Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,632.11 53 AME-950MD-40A-0B-0C-C-R-F Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-40A-0B-0C-C-R-F  40A = 40 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C = MS Style Connector and Mate on Side of Housing   R = Rear mount spherical rod end 3/4?  F = Front mount spherical rod end 3/4?  (35LBS) H 6" L 30" W 6"  0 $1,661.04 54 AME-950MD-41.47A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-41.47A-0B-0C-C-R  41.47A = 41.47 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C = MS Style Connector and Mate on Side of Housing  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,208.82 55 AME-950MD-41.5A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-41.5A-0B-0C-X-R  41.5A = Active Stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,208.82 56 AME-950MD-43A-0B-0C-C3-X Ametek Gemco 950 Mill Duty LDT Housing  Part 950MD-43A-0B-0C-C3-X  aka 950MD43A0B0CC3X  950MD = Protects the LDT from physical & environmental damage  The housing and body are manufactured from 304 stainless steel  43A = 43 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C3 = C3 = 5 Pin, 12mm, Euro Connector on Side of Housing  For 952A / 953A LDT's with Connector Option "S"  X = No Mounting or Extreme Condition Options   Ships in 3 Weeks  Dated 01-2024  (35LBS) H 6" L 52" W 6" Tube 5 $2,059.86 57 AME-950MD-43A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-43A-0B-0C-X-R  43A = Active stroke in Inches  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,216.86 58 AME-950MD-45A-0B-0C-X-B3-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-45A-0B-0C-X-B3-R  45A = 45 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  B3 = Protective Boot, Teflon Coated Fiberglass, -100F to +500 F  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End, 3/4 Inch I.D.   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,372.25 59 AME-950MD-45A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-45A-0B-0C-X-R  45A = 45 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End, 3/4 Inch I.D.  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,228.25 60 AME-950MD-46A-0B-0C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-46A-0B-0C-X-B1  46A = 46 Inch Active Stroke  0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F  Protects the LDT for resistance to water and oil.  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees    (35LBS) H 6" L 30" W 6"  [Amazon] 0 $1,510.92 61 AME-950MD-47.2A-0B-0C-X-B1R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-47.2A-0B-0C-X-BR1  47.2 = 47.244 / 1200 Millimeters Active Stroke  0B = Fully retracted Overstroke 0  0C = Fully extended Overstroke 0  X= Standard 1/2 Inch NPT Conduit Fitting  BR1 = Boot / Protective Boot, neoprene coated nylon -60 to 250 degrees F   R = Rear Mount Spherical Rod End 3/4 Inch   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,384.31 62 AME-950MD-48A-0B-0C-X-L Ametek Gemco Mill Duty Housing 950MD  Model 950MD-48A-0B-0C-X-L  950MD48A0B0CXL  48A = 48 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  L = Delrin Liner for extened life cycle on horizontal applications  Ships in 8 Weeks, Peck MI  Dated 01-2024  (35LBS) H 6" L 54" W 6" Carboard Tube 0 $1,913.00 63 AME-950MD-50A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-50A-0B-0C-C2-X  23A = 23 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only  X = No Mounting or Extreme Condition Options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,099.39 64 AME-950MD-54A-0B-0C-C4-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-54A-0B-0C-C4-R  54A = 54 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C4 = 6 Pin, 12mm, Euro Connector Side of Housing   R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,471.50 65 AME-950MD-54A-0B-0C-X-X Ametek Gemco Mill Duty Housing 950MD  Part 950MD-54.0A-0B-0C-X-X  950MD54.0A0B0CXX  Mill Duty Housing for Linear Displacement Transducers.  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.  The Front mount has a Spherical Rod End by 1/2 Inch.  Is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  54.0A = 54.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Ships in 6 to 8 Weeks, Peck MI  Dated 01-2024  (32LBS) H 6" L 64" W 6" Cardboard Tube 0 $1,928.50 66 AME-950MD-56A-0B-0C-X-X Ametek Gemco Mill Duty Housing 950MD  Part 950MD-56.0A-0B-0C-X-X  950MD56.0A0B0CXX  Mill Duty Housing for Linear Displacement Transducers.  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.  The Front mount has a Spherical Rod End by 1/2 Inch.  Is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  56.0A = 56.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Ships in 6 to 8 Weeks, Peck MI  Dated 01-2024  (32LBS) H 6" L 62" W 6" Cardboard Tube 0 $1,939.89 67 AME-950MD-6.3A-0B-0C-C5A-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-6.3A-0B-0C-C5A-R  6.3A = 6.3 Inches of Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C5A = 10 Pin STD to 953A 5 Pin Euro  R = Rear Mount Spherical Rod End by 3/4 Inch I.D.   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,205.51 68 AME-950MD-60.3A-0B-0C-C5A-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-60.3A-0B-0C-C5A-R  60.3A = 60.3 Inches of Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C5A = 10 Pin STD to 953A 5 Pin Euro  R = Rear Mount Spherical Rod End by 3/4 Inch I.D.   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,507.01 69 AME-950MD-60A-0B-0C-X-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-60A-0B-0C-X-B1  60A = 60 Inch Active Stroke  0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F  Protects the LDT for resistance to water and oil.  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,106.00 70 AME-950MD-60A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-60A-0B-0C-X-R  60A = 60 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,312.00 71 AME-950MD-66.5A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-66.5A-0B-0C-C2-X  665A = 66.5 Inches of Active Stroke  0B = 0 Inch Fully Retracted Overstroke  0C = 0 Inch Fully Extended Overstroke  C2 = MS Style Connector and mate on Side of Housing (951 & 952 LDT's only)  X = No Mounting or Extreme Condition Options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,191.18 72 AME-950MD-66.5A-0B-0C-X-X Ametek Gemco Mill Duty Housing 950MD  Part 950MD-66.5A-0B-0C-X-X  950MD66.5A0B0CXX  Mill Duty Housing for Linear Displacement Transducers.  Protects the LDT from physical & environmental damage.  The Housing and Body are manufactured from 304 Stainless Steel.  The Front mount has a Spherical Rod End by 1/2 Inch.  Is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees.  66.5A = 66.5 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  X = No other options   Ships in 6 to 8 Weeks, Peck MI  Dated 01-2024  (34LBS) H 6" L 74" W 6" Cardboard Tube 0 $1,998.18 73 AME-950MD-66A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-66A-0B-0C-C2-X  66A = 66 Inch Active Stroke / Travel  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only  X = No Mounting or Extreme Condition Options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,188.50 74 AME-950MD-6A-0B-0C-C2-R-F-B3 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-6A-0B-0C-C2-R-F-B3  6A = 6 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  C2 = Environmental MS Style Connector and Mate on the Side of the Housing  R = Rear Mount Spherical Rod End 3/4 Inch  F = Front Mount Spherical Rod End by 3/4 Inch  B3 = Protective Boot, Teflon Coated Fiberglass, -100 to 500 Degrees F  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,955.50 75 AME-950MD-72A-0B-0C-C2-B1 Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-72A-0B-0C-C2-B1  72A = 72 Inch Active Stroke  0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C2 = 2 Inch Overstroke / Fully Extended Overstroke in Inches  B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F  Protects the LDT for resistance to water and oil.  The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,366.00 76 AME-950MD-7A-0B-0C-C2-X Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-7A-0B-0C-C2-X  7A = 7 Inch Active Stroke  0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches  0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches  C2 = MS Style Connector and Mate on the Side of the Housing, 951 & 952  X = No other options   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $1,858.86 77 AME-950MD-82A-1B-1C-X-RF Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-82A-1B-1C-X-RF  82A = 82 Inch Active Stroke  1B = 1.0 Inches of Overstroke / Fully Retracted Overstroke in Inches  1C = 1.0 Inches Overstroke / Fully Extended Overstroke in Inches  X = Environmental MS Style Connector and Mate on the Side of the Housing  R = Rear Mount Spherical Rod End 3/4 Inch ID  F = Front Mount Spherical Rod End 3/4 Inch ID  Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,248.72 78 AME-950MD-84A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-84A-0B-0C-X-R  84A = 84 Inches of Active Stroke  0B = 0 Inch Fully Retracted Overstroke  0C = 0 Inch Fully Extended Overstroke  X = Standard 1/2 Inch conduit Fitting  R = Rear Mount Spherical Rod end 3/4 inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  Dated 01-2024  (35LBS) H 6" L 30" W 6" 0 $2,446.00 79 AME-950MD-87A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-87A-0B-0C-X-R  87A = 87 Inches of Active Stroke  0B = 0 Inch Fully Retracted Overstroke  0C = 0 Inch Fully Extended Overstroke  X = Standard 1/2 Inch conduit Fitting  R = Rear Mount Spherical Rod end 3/4 inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,462.75 80 AME-950MD-9.84A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-9.84A-0B-0C-C-R  9.84A = 9.84 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  C = MS Style Connector and Mate on Side of Housing  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,031.94 81 AME-950MD-90.5A-1B-1C-C2-X Ametek Gemco Mill Duty Housing 950MD  Part 950MD-90.5A-1B-1C-C2-X  959MD90.5A1B1CC2X  950MD = Mill Duty Housing  Protects the LDT from physical & environmental damage.   The housing and body are manufactured from 304 stainless steel.  A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly.  90.5A = 90.5 Inch Active Stroke / Travel  1B = 1 Inch Fully Retracted Overstroke in Inches  1C = 1 Inch Fully Extended Overstroke in Inches  C2 =Environmental MS Style Connector and mate on Side of Housing, 951 & 952 LDT's only  X = No Mounting or Extreme Condition Options   Ships in 10 Weeks, Peck MI  Dated 01-2024  (35LBS) H 6" L 100" W 6" Cardboard Tube - 0 $2,335.90 82 AME-950MD-98A-0B-0C-X-R Ametek Gemco Mill Duty Housing for Linear Displacement Transducers  Model 950MD-98A-0B-0C-X-R  98A = 98.0 Inch Active Stroke  0B = 0 Overstroke / Fully Retracted Overstroke in Inches  0C = 0 Overstroke / Fully Extended Overstroke in Inches  X = Standard 1/2 Inch NPT Conduit Fitting  R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt   Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch  Dated 01-2024  (35LBS) H 6" L 30" W 6"  0 $2,524.39

Secure Online Order     Secure Online Order   14,370 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.