|Linear Displacement Transducers
955A BRIK Gen III LDT
The 955A BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The BRIK can be ordered in span lengths up to 180 inches long in 0.1 inch
increments. Applications include: Presses, blow molding, extrusion, roll positioning, dancer control and many more.
V0 = 0 - 10 VDC
V1 = 10 - 0 VDC
C4 = 4 to 20 mA
C2 = 20 to 4 mA
D0 = Differential 0 - 10 VDC*
D1 = Differential 4 - 20 mA *
*Analog differential output is the difference between two magnets. Minimum distance is 2.5".
Stroke in Inches
Insert stroke in inches to 0.1 inch. Enter as a four-place number. Example: 12.0 in stroke entered as 0120. To convert a metric stroke in millimeters, multiply millimeter value by 0.03937 to arrive at inch value.
X = No options
E = Wet environment. Electronics sealed to IP 68 Rating.
Gemco Ordering Guide
955A BRIK LDT Manual
Magnets, Cables and Connector Styles