Linear Displacement Transducers |
955DQ BRIK Gen III LDT
DESCRIPTION
The 955DQ BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The 955DQ BRIK is an accurate, auto-tuning, non-contact linear
displacement transducer in an economical, low profile package with direct quadrature output.
SPECIFICATIONS
Input Voltage- 13.5 to 30 VDC
Current Draw- 2.5 Watts Maximum, 120 mA @ 15 VDC Typical
Output- Quadrature Output A+, A-, B+, B-, Z+, Z-Line Drivers: 5V or Input Power
Resolution- 0.001"
Non-Linearity- +/- 0.05% of Stroke
Repeatbility- +/- 0.006% of Full Stroke
Hysteresis- +/- 0.02% of Full Scale
50" or less - 1mS (Stroke Lengths 5" - 50")
51" to 100" - 2mS (Stroke Lengths 51" - 100")
101" to 150" - 3mS (Stroke Lengths 101" - 150")
151" to 180" - 4mS (Stroke Lengths 151" - 180")
Operating Temperature - -20o to 70o C
Span Length- 5" to 180"
Null Zone- 3.00"
Dead Zone- 2.00"
LED- Green = Power is applied and magnet is present. Red = Fault, magnet is in the Dead Zone or lost.
Connector - Standard 12 Pin Micro (Option E) 12mm Euro Connectoror 10 Pin HRS (Option H)
Approvals - CE
Enclosure - IP67, IP68 Optional (Connector Option E Only)
Specifications are subject to change without notice. Specifications are based on a typical 36" LDT.
Gemco Ordering Guide
955DQ Brik Manual
Magnets, Cables and Connector Styles
|
|
|
|