Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,221 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,385 part numbers: Motion Control Products     GLEASON 18,104 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,242 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 926 part numbers: Electrical Control Products   HUBBELL 8,289 part numbers: Electrical Control Products     RENOLD 408 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

Rotary Limit Switches, Position Sensors, Resolvers, Encoders   1980 Rotating Cam Limit Switch   DESCRIPTION   The Series 1980 Micro-Adjust Rotating Cam Limit Switch is a pilot device used for heavy duty material handling mechanisms, mechanical presses, packaging machines, rotary tables, and in many other applications where repetitive and sequential operations are required in control circuitry. When motion is expressed in shaft rotation, either thru a roller chain, gear train, or directly, the Rotating Cam Limit Switch makes it possible to open or close independent circuits at any desired angular positions. The Series 1980 is available in NEMA 1, NEMA 4 & 5, NEMA 7, NEMA 9, and NEMA 12 enclosures. The units can be ordered with 2 to 40 circuits.   SPECIFICATIONS   Resolver   Resolution - 12 bit resolution (4096 counts) RPM - 1024 max.   DeviceNet   Conformance - This product has been tested by ODVA's authorized Independent Test Lab and found to comply with ODVA Conformance Test Software Version A-12. Power Requirements - 92mA @ 11Vdc typical - 67mA @ 24Vdc typical. InRush - 350mA @ 11Vdc for 20 ms - 450mA @ 25Vdc for 10 ms. Device Type - "Generic" Communications - Group 2 slave only. Messages supported - Polled, Bit Strobed, Explicit. Baud Rates - 125K, 250K, 500K Position Rate - 915 microseconds RPM - 29.29 ms Scale Factor - 2 to 4096 Position Range - 0 to 1 less than scale factor. Setpoints - Separate ON and OFF points for each setpoint. Quantity - 8 Range - 0 to 1 less than scale factor. Approvals - CE Operating Temperature -20oC to +70oC Storage Temperature -40oC to +85oC   • 1980S Rotating Cam Limit Switch Manual • 1980 Ordering Guide and Technical Information • 1950 Precision Snap Switch Information • Drawing Gemco 1950 Snap Switches • Dimension Drawing NEMA 4 RCLS 2-40 CIR W SDGR • NEMA 7 and NEMA 9 Explosion-Proof Statement, Rev A       1980 Rotating Cam Limit Switch Set-up Procedure No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-P0034600 Ametek Gemco Cam Tool  Part P0034600  Old Part P-346-B  Timing & Dwell Adjustment Tool  For 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 7 Days  Dated 01-2023  (1LB) H 4" L 5" W 4" Box 40 $5.00                                 Stand Alone Brake Monitoring Module and Accessories No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-SD0202900 Ametek Gemco Stand Alone Brake Monitor Module  Part SD0202900  NEMA 1 Enclosure with Cover and Shaft  Ships in 2 Weeks  Dated 01-2021 - 0 $324.00 2 AME-SD0213300 Ametek Gemco Stand Alone Brake Monitor Module  Part SD0213300  NEMA 12 Enclosure with Cover & Shaft  Ships in 3 Weeks, Peck MI  Dated 01-2021 - 0 $434.00 3 AME-SD0117800 Ametek Gemco Cam 1980  Part SD0117800  Old Part SD-1178-C  Mold # P.268.B  Standard Adjustable Cam Assembly  Parts P0035600 & P0035700  Includes 2 Roll Pins for installation  For some - most 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 08-2025  (1LB) H 4" L 6" W 4" Box 0 $155.00 4 AME-SD0197700 Ametek Gemco Disc  Part SD0197700  Electronic Pulse Generating Disc  Optical Pulse Disc for 1980 Series RCS  Normally aStock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2021  (1LB) H 4" L 6" W 4" Box - 1 $106.00 5 AME-SD0194800 Ametek Gemco Electronic Pulse Generating Switch  Part SD0194800  5 Volt DC  For Brake Monitor  Ships in  Dated  (1LB) H 6" L 4" W 4" 0 $395.28 6 AME-SD0157100 Ametek Gemco Roller Follower Assembly  Part SD0157100  aka P-518-B P-520-B  Limit Switch Roller Follower  Mounts between the Cam & Snap Switch  Increases switch life on 1980 Series Cam Box's  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 144 $37.00 7 AME-1950-1-B-A-AO Ametek Gemco Switch 1950  Part 1950-1-B-A-AO  19501BAA0  1950 = Precision, Snap Action, Switch Assembly  1 = SPDT, Single Pole Double Throw  can be wired for N.O or N.C. Circuit  Four Screw Terminals  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC / DC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 77 $63.00 8 AME-1950-4-B-A-AO Ametek Gemco Switch 1950  Part 1950-4-B-A-AO  19504BAAO  19504BAA0  1950 = Precision, Snap Action, Switch Assembly  4 = Double Pole Double Throw / D.P.D.T.  Eight Screw Terminals, can be wired for Normally Open or   Normally Close Circuits  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals, Qty., 8  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 0 $123.00 Add-On Brake Monitoring Module and Accessories No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-SD0195800 Ametek Gemco Module  Add-On, Brake Monitor Module Assembly  NEMA 1 Enclosure with Cover & Shaft  [1/2017]  [1/2018]  [1/2018] - 0 $324.00 2 AME-SD0117800 Ametek Gemco Cam 1980  Part SD0117800  Old Part SD-1178-C  Mold # P.268.B  Standard Adjustable Cam Assembly  Parts P0035600 & P0035700  Includes 2 Roll Pins for installation  For some - most 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 08-2025  (1LB) H 4" L 6" W 4" Box 0 $155.00 3 AME-SD0197700 Ametek Gemco Disc  Part SD0197700  Electronic Pulse Generating Disc  Optical Pulse Disc for 1980 Series RCS  Normally aStock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2021  (1LB) H 4" L 6" W 4" Box - 1 $106.00 4 AME-SD0194800 Ametek Gemco Electronic Pulse Generating Switch  Part SD0194800  5 Volt DC  For Brake Monitor  Ships in  Dated  (1LB) H 6" L 4" W 4" 0 $395.28 5 AME-SD0157100 Ametek Gemco Roller Follower Assembly  Part SD0157100  aka P-518-B P-520-B  Limit Switch Roller Follower  Mounts between the Cam & Snap Switch  Increases switch life on 1980 Series Cam Box's  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 144 $37.00 6 AME-1950-1-B-A-AO Ametek Gemco Switch 1950  Part 1950-1-B-A-AO  19501BAA0  1950 = Precision, Snap Action, Switch Assembly  1 = SPDT, Single Pole Double Throw  can be wired for N.O or N.C. Circuit  Four Screw Terminals  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC / DC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 77 $63.00 7 AME-1950-4-B-A-AO Ametek Gemco Switch 1950  Part 1950-4-B-A-AO  19504BAAO  19504BAA0  1950 = Precision, Snap Action, Switch Assembly  4 = Double Pole Double Throw / D.P.D.T.  Eight Screw Terminals, can be wired for Normally Open or   Normally Close Circuits  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals, Qty., 8  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 0 $123.00

Secure Online Order     Secure Online Order   14,385 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.