Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
73,498 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,172 part numbers: Motion Control Products
 
  GLEASON
20,233 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,642 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,329 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,643 part numbers: Motor Mounted Brakes
  HUBBELL
16,092 part numbers: Electrical Control Products
  SUPERBOLT
107 part numbers: Fastening Solutions
  TELEMOTIVE
2,481 part numbers: Radio Remote Control
  RENOLD
401 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
69 part numbers
 

Brake Products
Amazon Store

 
496 part numbers
 
 
Check out our expanded Wagner inventory:
 
 

 
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Ametek Gemco CB75 AC Magnetic Shoe Brake Assembly and All Replacement Parts

No Qty
Req'd
Part
Number
Description Picture Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
0 1 AME-CB-75 Ametek Gemco Solenoid Brake Assembly  
Part CB-75 
Spring Set / Solenoid Released 
7.00 Inch Diameter 
Many AC Voltages 460, 230, 115, 575 
60 Hz Single Phase 
75 FT LB with a Intermittent Duty Cycle 
50 FT LB with a Continuous Duty Cycle 
Less a 7.00 X 3.25 Inch Brake Wheel E007500 
Options include, 230, 115 & 575 Volt 
Reliable design with very few parts 
Simple one point torque adjustment 
Rugged long life solenoid 
Tested in more than 2 million operational cycles without electrical failure 
Manual brake release with hand pressure on the solenoid arm 
Solenoid plunger travel indicator 
A mark on the plunger indicates when the brake should be adjusted for lining wear 
Simple two-point adjustment for lining wear 
Light Duty Solenoid Brake for up to Class "C" Cranes 
Application Safety Factors need to be followed during selection of a brake 
Stock to 5 Weeks to Ship 
[Updated 1-19] 
(60LBS) H 12" L 20" W 8"
1 $1,769.00
1 1 AME-E007069 Ametek Gemco Base. Brake Frame / Base 
For a CB-75 & CB-110 Solenoid Brake 
Item 1, 1 per brake 
aka 9510D16H03
- 0 $549.00
2 1
AME-E007080 Ametek Gemco Coil  
Part E007080 
Solenoid Brake Coil 
For a 7 Inch CB-75 Brake 
115 Volt AC, 60 Hz 
Item 2, 1 per brake 
aka 3280B04G09 E007080997 4262201 
Dated 1/18 
(2LBS) H 4" L 5" W 4" Box
- 2 $560.00
AME-E007081 Ametek Gemco Coil  
Part E007081 
Solenoid Brake Coil 
230 Volt 60 Hz 
For a 7 Inch CB-75 Brake  
aka 3280B04G10 & E007081997 
Dated 1/18 
(2LBS) H 4" L 5" W 4" Box
- 0 $560.00
AME-E007065 Ametek Gemco Coil CB 7" 460 
Part E007065 
aka E007065997 
Solenoid Brake Coil 
For a 7 Inch CB-75 Brake 
460 Volt AC, 60 Hz 
Item 2, 1 per brake 
Old West 3280B04G11 
Ship from Stock @ BPI 
Dated 1-19 
(2LBS) H 4" L 5" W 4" Box
0 $560.00
AME-E007082 Ametek Gemco Coil  
Part E007082 
Solenoid Brake Coil 
For a 7 Inch CB-75 Brake 
575 Volt AC, 60 Hz 
Item 2, 1 per brake 
aka 3280B04G12 E007082997 426220500 
Dated 1/18 
(2LBS) H 4" L 5" W 4" Box
- 0 $560.00
AME-E007083 Ametek Gemco Coil  
Part E007083 
Solenoid Brake Coil 
For a 7 Inch CB-75 Brake 
200 Volt AC, 60 Hz 
Item 2, 1 per brake 
aka 3280B04G19 & E007083997 
Dated 1/18 
(2LBS) H 4" L 5" W 4" Box
- 0 $665.00
3 1 AME-E010069 Ametek Gemco Conduit Box 
Part E010069 
aka E010069999 
Conduit / Junction Box  
Does not include Cover Plate or Fasteners 
For CB75, CB110 or CB160 Brakes 
Ships from Stock 
Dated 1-19 
(1LB) H 4" L 5" W 4" Box
- 1 $52.00
4 1 AME-E007079 Ametek Gemco Solenoid Assembly CB75 
Part E007079 
aka E007079002 
For a CB-75 7 Inch Diameter Brake 
Includes the Plunger & Solenoid Guides 
NOT the Coil 
Item 4, 1 per brake 
aka 3279B97H03 
Ships from Stock @ BPI 
Dated 1-19 
(7LBS) H 4" L 5" W 4" Box
0 $613.00
5 2 AME-E007076 Ametek Gemco Solenoid Guides 
Part E007076 
Brass Solenoid Guides 
For a CB-75, CB-110 or CB-160 Brakes 
Item 5, sold each, 2 per brake 
aka 6753A37H03 E007076999 
[Amazon] Dated 1/18 
(1LBS) H 4" L 5" W 4" Box
3 $69.00
6 1 AME-E007055 Ametek Gemco Pin 
For a CB-75, CB110 & CB-160 Brake 
Connects plunger to link 
Item 6, 1 per brake 
aka 2247C08H09 
(1LB)
- 8 $37.00
7 1 AME-E007061 Ametek Gemco Link 
Part E007061 
For a CB-75 Brake Assembly 
Link between Plunger & Lever Arm 
Item 7, 1 per brake 
aka 3279B92H03 
[Amazon] Dated  
(1LBS) H 5" L 5" W 5" Box
4 $52.00
8 1 AME-E007054 Ametek Gemco Pin 
For a CB75 & 110 Brake  
Item 8, 1 per brake 
Pin Connection of Link & Brake Arm 
aka 2247C08H08 
(1LB)
- 4 $81.00
9 1 AME-E007058 Ametek Gemco Lever 
Part E007058 
Brake Lever 
For a 7 Inch CB-75 & CB-110 Brake  
Item 9, 1 per brake 
aka 2247C09H03 
[Amazon] Dated 1/17 
(3LBS) H 4" L 6" W 4" Box
3 $147.00
10 1 AME-E007063 Ametek Gemco Brake Part CB Brakes 
Part AME-E007063 
Spring Seat on the Tie Rod 
For a CB-75 , CB-110 & CB-160 Brake 
Item 10, 1 per brake 
aka 3279B93H01 
[Amazon] 
(1LB) H 4" L 5" W 4" Box
4 $5.00
11 1 AME-E010064 Ametek Gemco Main Spring 
Part E010064 
Main Spring 
For a CB-75, CB-110 or CB-160 Brake 
3.85 Inches Long Installed DeEnergized 
Item 11, 1 per brake 
aka Old West 3280B01H01 
[Amazon] 
Ships from Stock to 2 Weeks 
Dated 1-19 
(1LB) H 4" L 5" W 4" Box
1 $69.00
12 1 AME-E007084 Ametek Gemco Spring Plate Assembly 
For a CB-75 or CB-100 Brake 
Item 12, 1 per brake 
aka 3279B90G03
- 0 $177.00
14 3 AME-E007053 Ametek Gemco Pin 
Part E007053 
Hardened Pin 
For a 7 Inch CB75 & CB-110 Brake 
Item 14, 3 per brake, sold each 
Used with the Brake Shoes 
aka 2247C08H07 
[Amazon] Dated 1/17 
(2LBS) H 4" L 6" W 4" Box
2 $121.00
15 1 AME-E007057 Ametek Gemco Pin 
aka 2247C08H18 
(1LB)
- 1 $33.00
17 1 AME-E007059 Ametek Gemco Rod. Adjusting Rod 
For a CB-75 & CB-110 Brake 7 Inch 
Item 17, 1 per brake 
aka 3279B86G03
- 1 $289.00
18 1 AME-E007500 Ametek Gemco Brake Wheel 7 Inch 
Part E007500 
For the CB-75 & CB-110 AC Brake  
7.00 Inch Brake Wheel Diameter, Stock Bore 
4.25 Inch Face Width 
3.26 Inch Hub Offset 
2.62 Inch Hub Length Through Bore 
3.13 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
1.875 Inch Maximum Recommended Bore 
Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 
aka E007500999 
[Amazon] Dated 1/18 
(25LBS) H 7" L 7" W 7" Box
- 3 $971.00
  1 AME-E007074 Ametek Gemco Brake Shoe & Lining 
Part E007074 
For a 7 Inch CB-75 or CB-110 Brake 
Inner Shoe 
Bonded Premium OEM Non-Asbestos Lining 
1 per brake 
aka 2254C28G03 
[Amazon] Dated 1/18 
(9LBS) H 5" L 7" W 5" Box
- 1 $473.00
  1 AME-E007073 Ametek Gemco Brake Shoe & Lining 
Part E007073 
For a 7 Inch CB-75 or CB-110 Brake 
Outer Shoe 
Bonded Premium OEM Non-Asbestos Lining 
1 per brake 
aka 2254C27G03 
[Amazon] Dated 1/18 
(9LBS) H 5" L 7" W 5" Box
1 $473.00
19 1 AME-E007078 Ametek Gemco Lining Kit 
Part E007078 
For a 7 Inch CB-75 or CB-110 Brake 
Includes: 
2 Linings Drilled & Countersunk for Fasteners 
Fasteners / Rivets 
Premium Non-Asbestos Lining Material 
(1LB) H 4" L 6" W 4" Box
- 2 $249.00
Secure Online Order
 

 
Secure Online Order
 
part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate

Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 RLS
  • 2006 RLS
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985