TELEMOTIVE 2,498 part numbers: Radio Remote Control
RENOLD 406 part numbers: Mechanical Power Transmission Products
AUTOMATIC QUANTITY DISCOUNTS
BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.
Quotation is valid for 30 days and can be immediately converted into an order.
CREDIT TERMS CHANGES
Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold.
New customer payment terms are "Credit Card" only, full pre-pay.
Credit Card information needs recorded at the time of order.
Terms can be re-negotiated, upon successful payment.
The series 925 Linear Cable Reel Sensor can be used in any linear application up to 1200 inches. The system consists of a heavy-duty spring
motor assembly attached to a precision machined cable drum. As the cable is pulled off of the precision drum, the drum rotates a shaft connected
to it. The shaft is precisely geared such that the full number of revolutions of the drum is equal to the appropriate number of revolutions
required by the chosen sensor. The Series 925 Linear Cable Reel Sensor can be used with our Series 1746 Resolver Input Card and a Series 2120
PLC Transducer Module. The 925 Cable Reel also provides accurate position feedback for linear motion up to 100 feet. Mounting for either
resolver, encoder, cam switch or rotary potentiometer.
SPECIFICATIONS
Stroke Range - Up to 1200 inches (100 ft.) standard
Mechanical Accuracy - 0.05% of active stroke
Speed Range - Variable
Cable Tension - Type A unit 2.5 lbs. to 4.2 lbs. (stroke to 96"), Type A unit 1.25 lbs. to 4.2 lbs. (stroke to 192"), Type B unit
1.6 lbs. to 14.27 lbs., Type C unit .75 lbs. to 16.30 lbs.
Cable Material - .56 (actual) stainless steel aircraft grade
Housing Material - 10 gage cold rolled sheet steel with baked enamel paint finish
Seal - Splash Proof
Temperature Range - Sensor dependent (most encoders and potentiometers are around 0o to 180o F standard, resolvers are
typically -50o to 250o F). Check manufacturers specs.
Intrinsically Safe LDT - The 950IS is an intrinsically safe analog system. The system uses a remote transmitter mounted in a safe area wired
through intrinsically safe barriers to the LDT, which may be mounted in a hazardous area. The term 'Intrinsically Safe' pertains to a device's
inability to produce an electrical spark of enough significance to cause ignition. This system incorporates circuitry that is U.L. listed for
use in Class I, Groups C and D, Class II, Groups E, F and G, and Class III hazardous locations.
SPECIFICATION
Input Voltage/Current Draw - 24 VDC @ 85mA max.115 VAC 50/60 Hz @ 6 VA230 VAC 50/60 Hz @ 6 VA
Output - 0 to 10 VDC or 10 to 0 VDC4 to 20mA or 20 to 4mA
Linearity - .01"
Repeatability - +/- 0.01% of Full Stroke
Operating Temperature - Head Electronics, Guide Tube - 10o to 180o F (-23o to 82o C)-40o to 185oF (-40o to 85oC)
Operating Pressure - 3000 psi Operational, 8000 psi Spike
Span Length - 1" to 300"
Null Zone - 2"
Dead Band - 5
Connectors - 2 Pin 12m
Enclosure - IP65
Mill Duty Housing - The Gemco 950MD Mill-Duty Housing is a stainless steel housing designed to protect LDTs in harsh or high temperature
environments such as those found in heavy industrial plants and processes. In addition, it is also used where Nema 4 protection is required
or where mounting limitations exist.
BlueOX LDT - The Series 952 BlueOx is designed for applications where high accuracy, high speed, and survival are important. It is lab tested
and field proven to stand up to high shock and vibration. With test results of 2,000 G's of shock and 30 G's of random vibration without false
signals or mechanical damage, the BlueOx is ready to perform on the most demanding applications. The BlueOX has standard outputs and connectors
that can easily replace competitive brand transducers. It is available in stroke lengths up to 168".
SPECIFICATIONS
Input Voltage - Analog: 13.5 to 30 VDC Digital: 13.5 to 26.4 VDC, or +/- 15 VDC
Current Draw - < 200mA at 15 VDC
Output - Analog: 0 to 10 VDC or 10 to 0 VDC, 4 to 20mA or 20 to 4mA Digital: Start/Stop, Control Pulse or Pulse-Width Modulated/Variable Pulse (PWM/VP)
Resolution Internal Analog Output - 0.001" 16 Bit (1 part in 65,535)
Linearity +/-0.05% of Full Scale
Repeatability +/-0.006% of Full Scale(+/- .002 inch min.)
Hysteresis +/-.02% of Full Scale
Operating Temperature, Head Electronics -40o to 158o F (-40o to 70o C)
Operating Temperature, Guide Tube -40o to 221o F (-40o to 105o C
Operating Pressure - 5000 psi Operational, 10,000 psi Spike
Span Length - 2" to 168"
Null Zone - 2"
Dead Band - 2.5"
Connectors - 2mm Micro 5 Pin, CE Approved (Analog Only),10 Pin 1/4 Turn MS Connector, Potted Pigtail Assembly, Optional Temposonics II & III Connectors
Update Time Analog - 1ms (Stroke Lengths 1" to 50"), 2ms (Stroke Lengths 51" to 100"), 3ms (Stroke Lengths 101" to 150"), 4ms (Stroke Lengths 151" to 168")
Digital - Controller Dependent
Enclosure - IP67
Approvals - CE (Analog 12mm Micro 5 Pin Connector Only)
Specifications are subject to change without notice. Specifications are based on a typical 36" LDT.
The new GEMCO® 953 Series VMAX Linear Displacement Transducer (LDT) from AMETEK Automation & Process
Technologies was developed to meet the most demanding processing challenges, regardless of application or operating environment. The highly
versatile VMAX LDT offers absolute accuracy and reliability with high resolution and precision repeatability. The VMAX LDT is resistant to
contaminants and environmental conditions and is IP68 rated. Its rugged and durable mill-duty construction exceeds competitive offerings.
Its vibration resistance is lab tested at 30 Gs and shock resistance is lab tested at 1000 Gs. The unit's sleek housing offers unlimited
installation flexibility. The LDT is easy to install and set up. It features the latest generation of magnetostrictive position-sensing
technology with automatic gain circuitry and factory calibrated zero point. Custom configurations are available to meet specific end user
requirements.
SPECIFICATION
• SSI (Synchronous Serial Interface) 24, 25 or 26 Bit, Binary or Gray Code, Synchronous or Asynchronous Mode
• Digital Outputs, Start/Stop, Variable Pulse (PWM), Control Pulse
• Analog Outputs, 0-10 VDC, +/-10 VDC, 0-5 VDC, +/-5 VDC, 4-20mA
• High Shock Resistance to 1000Gs (lab tested)
• High Vibration Resistance to 30Gs (lab tested)
• Removable Cartridge for Hydraulic Applications
• Resolution to 0.00006"
• Linearity +/- 0.01%
• Wide Input Range of 7-30 VDC @ 1 Watt
• Heat & Contaminant Resistance
• IP68 Rating
• Tri-color Diagnostic LED
• Programmable Zero & Span
• Sensor Length up to 300"
The new GEMCO® 953 Series VMAX Linear Displacement Transducer (LDT) from AMETEK Automation & Process
Technologies was developed to meet the most demanding processing challenges, regardless of application or operating environment. The highly
versatile VMAX LDT offers absolute accuracy and reliability with high resolution and precision repeatability. The VMAX LDT is resistant to
contaminants and environmental conditions and is IP68 rated. Its rugged and durable mill-duty construction exceeds competitive offerings.
Its vibration resistance is lab tested at 30 Gs and shock resistance is lab tested at 1000 Gs. The unit's sleek housing offers unlimited
installation flexibility. The LDT is easy to install and set up. It features the latest generation of magnetostrictive position-sensing
technology with automatic gain circuitry and factory calibrated zero point. Custom configurations are available to meet specific end user
requirements.
SPECIFICATION
• SSI (Synchronous Serial Interface) 24, 25 or 26 Bit, Binary or Gray Code, Synchronous or Asynchronous Mode
• Digital Outputs, Start/Stop, Variable Pulse (PWM), Control Pulse
• Analog Outputs, 0-10 VDC, +/-10 VDC, 0-5 VDC, +/-5 VDC, 4-20mA
• High Shock Resistance to 1000Gs (lab tested)
• High Vibration Resistance to 30Gs (lab tested)
• Removable Cartridge for Hydraulic Applications
• Resolution to 0.00006"
• Linearity +/- 0.01%
• Wide Input Range of 7-30 VDC @ 1 Watt
• Heat & Contaminant Resistance
• IP68 Rating
• Tri-color Diagnostic LED
• Programmable Zero & Span
• Sensor Length up to 300"
953N ReadyLinkTM EtherNet/IPTM LDT with RapidRecallTM
DESCRIPTION
The ReadyLinkTM EtherNet/IPTM LDT with RapidRecallTM is our newest linear displacement transducer (LDT) being
developed with an EtherNet/IPTM network interface. The Network LDT provides maximum flexibility for installation and ease of use in
demanding, high-performance, networked industrial applications. EtherNet/IPTM is an Industrial Ethernet implementation of the Common
Industrial Protocol (CIP), managed by the Open DeviceNet Vendor Association (ODVA). EtherNet/IPTM systems require only a single point
network connection for both configuration and control, thus simplifying installation and wiring.
Our linear displacement transducer line utilizes advanced, proven Magnetostrictive technology to provide highly precise and absolute non-contact
position feedback down to 1 micron resolution. We package these sensors to survive in the most demanding and hostile environments.
The AMETEK ReadyLinkTM EtherNet/IPTM LDT with RapidRecallTM is a smart device; it has a RapidRecallTM
Configuration Module to help aid in configuration of the LDT. This module is located on the head assembly of the LDT, next to the connectors.
The RapidRecallTM module can be used to help configure the static IP address of the LDT and store all user defined configurations. In
the module there are three rotary DIP switches that allow the user to configure how the IP address is assigned as well as other functions. Once
the LDT has been configured, these settings can be uploaded to the module. One of the key benefits to uploading the configuration data to the
RapidRecallTM module is that if anything was to ever go wrong with the LDT, the RapidRecallTM module with the entire user
programmed settings can be removed from the original unit and installed on the replacement unit. With a simple setting of the DIP switches the
user configuration settings can be downloaded from the RapidRecallTM module to the new LDT.
FEATURES
• RapidRecallTM Configuration Module
• Supports: Star, Line & DLR (Device Level Ring) topology
• Supports Encoder 22h Profile
• 5 status LEDs to monitor functionality of LDT and Network status
• IP address selection flexibility - Providing both local switch & software setting capability
• Setup via web browser - No special configuration software required
• Ability to backup and restore unit configuration in RapidRecallTM Configuration Module
• Ability to reset unit to factory defaults
• Diagnostics and alarm functionality (web page)
• Status Bits: Position & Velocity out of programmable limits range
• Wide input power operating range (7 - 30VDC) - Standard M12 connector
• IP67 Rated
• Non-contact technology (Magnetostrictive)
• Longevity: Nothing to wear out
• Simplified system wiring
The new GEMCO® 953 Series VMAX Linear Displacement Transducer (LDT) from AMETEK Automation & Process
Technologies was developed to meet the most demanding processing challenges, regardless of application or operating environment. The highly
versatile VMAX LDT offers absolute accuracy and reliability with high resolution and precision repeatability. The VMAX LDT is resistant to
contaminants and environmental conditions and is IP68 rated. Its rugged and durable mill-duty construction exceeds competitive offerings.
Its vibration resistance is lab tested at 30 Gs and shock resistance is lab tested at 1000 Gs. The unit's sleek housing offers unlimited
installation flexibility. The LDT is easy to install and set up. It features the latest generation of magnetostrictive position-sensing
technology with automatic gain circuitry and factory calibrated zero point. Custom configurations are available to meet specific end user
requirements.
SPECIFICATION
• SSI (Synchronous Serial Interface) 24, 25 or 26 Bit, Binary or Gray Code, Synchronous or Asynchronous Mode
• Digital Outputs, Start/Stop, Variable Pulse (PWM), Control Pulse
• Analog Outputs, 0-10 VDC, +/-10 VDC, 0-5 VDC, +/-5 VDC, 4-20mA
• High Shock Resistance to 1000Gs (lab tested)
• High Vibration Resistance to 30Gs (lab tested)
• Removable Cartridge for Hydraulic Applications
• Resolution to 0.00006"
• Linearity +/- 0.01%
• Wide Input Range of 7-30 VDC @ 1 Watt
• Heat & Contaminant Resistance
• IP68 Rating
• Tri-color Diagnostic LED
• Programmable Zero & Span
• Sensor Length up to 300"
The 955 eBrik IITM is an accurate, programmable zero and span, auto-tuning, non-contact linear position sensor in an economical,
low-profile package. The sensor utilizes our field-proven Magnetostrictive technology to provide absolute position, repeatable to .001% of the
sensing distance. The 955 eBrik IITM is a cost effective linear sensing solution.
The streamlined anodized aluminum extrusion houses the sensing element and electronics. The magnet moves over the sensing element that
determines the position and converts it to a readable output. The 955 eBrik IITM is a self-contained unit and does not have a
"can" or head assembly. All of the electronics are incorporated in the transducer, which is less than one inch tall.
SPECIFICATIONS
Input Voltage: 24 VDC +/- 20%
Current Draw: 1.1w (44 mA typical)
Output:
0 to 10 VDC
10 to 0 VDC
4 to 20 mA
20 to 4 mA
Non-Linearity: Less than +/- 0.03% of stroke, or +/- 0.013" whichever is greater
Update Time: 1 ms
Repeatability: .001%
Operating Temperature: -40o to 85o C
Span Length: 1" to 74"
Null Zone: 3.03"
Dead Zone: 2.75"
Connectors: 12mm Micro 5 Pin
Enclosure: IP67 (IEC 60529)
Shock and Vibration: Shock - 100G, IEC 60068-2-27 (survivability), Vibration - 15G / 10 to 2000Hz, IEC 60068-2-6
Approvals: CE (EMC)
Specifications are subject to change without notice.
The 955A BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The BRIK can be ordered in span lengths up to 180 inches long in 0.1 inch
increments. Applications include: Presses, blow molding, extrusion, roll positioning, dancer control and many more.
FEATURES
Output Type
V0 = 0 - 10 VDC
V1 = 10 - 0 VDC
C4 = 4 to 20 mA
C2 = 20 to 4 mA
D0 = Differential 0 - 10 VDC*
D1 = Differential 4 - 20 mA *
*Analog differential output is the difference between two magnets. Minimum distance is 2.5".
Stroke in Inches
Insert stroke in inches to 0.1 inch. Enter as a four-place number. Example: 12.0 in stroke entered as 0120. To convert a metric stroke in millimeters, multiply millimeter value by 0.03937 to arrive at inch value.
Options
X = No options
E = Wet environment. Electronics sealed to IP 68 Rating.
The 955CA BRIK Gen III is an accurate programmable, auto tuning,non-contact, linear displacement transducer in an economical, low profile
package. The transducer utilizes our field proven magnetostrictive technology to give absolute position, repeatable to .006% of the programmable
sensing distance. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The unit is designed to mount on top
of a pneumatic cylinder and detect the movable magnet within the cylinder. It can be ordered with a 0-10 VDC or 4-20 mA output.
SPECIFICATIONS
Input Voltage- 13.5 - 30 VDC
Current Draw- 2.5 Watts Max., 120 mA @ 15 VDC Typical
Output- 0 to 10 VDC, 10 to 0 VDC, 4 to 20 mA, 20 to 4 mA
Resolution- Internal-0.001", Analog Output 16 bit (1 part in 65,535)
Non-Linearity- +/- 0.05% of Full Stroke
Repeatability- +/- 0.006% of Full Stroke
Operating Temperature- -40o to 158o F (-40o to 70o C)
Hysteresis- +/- 0.2% Full Stroke
Update - 1ms-(Stroke Lengths 5" to 40"), 2ms-(Stroke Lengths 41" to 100"), 3ms-(Stroke Lengths 101" to 150"), 4ms-(Stroke Lengths 151" to 180"), Span Length- 5" - 180"
Operating Temp.- -20o to 70o C
Null Zone- 3"
Dead Zone- 2.0"
Connectors- Standard 5 Pin Micro 12mm Euro Connector
Enclosure- IP67, IP68 Optional
Approvals- CE
Specifications are subject to change without notice
The 955D BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The BRIK can be ordered in span lengths up to 180 inches long in 0.1 inch
increments. Applications include: Presses, blow molding, extrusion, roll positioning, dancer control and many more.
SPECIFICATIONS
Input Voltage- 13.5 to 30 VDC
Current Draw- 2.5 Watts Maximum, 120 mA @ 15 VDC Typical
Output- Control Pulse, Variable Pulse, Stop/Start
Resolution- Controller Dependent
Non-Linearity- +/- 0.05% of Stroke
Repeatbility- +/- 0.006% of Full Stroke
Hysteresis- +/- 0.02% of Full Scale
Update- Controller Dependent
Operating Temperature- -20o to 70o C
Span Length- 5" to 180"
Null Zone- 3.00"
Dead Zone- 2.00"
LED- Green = Power is applied and magnet is present. Red = Fault, magnet is in the Dead Zone or lost. Yellow = No Interrogation Signal
Connector - Standard 6 Pin Micro 12mm Euro Connector
Approvals - CE
Enclosure- IP67, IP68 Optional
Specifications are subject to change without notice. Specifications are based on a typical 36" LDT.
The 955DQ BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The 955DQ BRIK is an accurate, auto-tuning, non-contact linear
displacement transducer in an economical, low profile package with direct quadrature output.
SPECIFICATIONS
Input Voltage- 13.5 to 30 VDC
Current Draw- 2.5 Watts Maximum, 120 mA @ 15 VDC Typical
Output- Quadrature Output A+, A-, B+, B-, Z+, Z-Line Drivers: 5V or Input Power
Resolution- 0.001"
Non-Linearity- +/- 0.05% of Stroke
Repeatbility- +/- 0.006% of Full Stroke
Hysteresis- +/- 0.02% of Full Scale
50" or less - 1mS (Stroke Lengths 5" - 50")
51" to 100" - 2mS (Stroke Lengths 51" - 100")
101" to 150" - 3mS (Stroke Lengths 101" - 150")
151" to 180" - 4mS (Stroke Lengths 151" - 180")
Operating Temperature - -20o to 70o C
Span Length- 5" to 180"
Null Zone- 3.00"
Dead Zone- 2.00"
LED- Green = Power is applied and magnet is present. Red = Fault, magnet is in the Dead Zone or lost.
Connector - Standard 12 Pin Micro (Option E) 12mm Euro Connectoror 10 Pin HRS (Option H)
Approvals - CE
Enclosure - IP67, IP68 Optional (Connector Option E Only)
Specifications are subject to change without notice. Specifications are based on a typical 36" LDT.
The 955LC BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The 955LC BRIK is a self-contained unit and does not have a can or head
assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. Units can be ordered in span lengths up to
180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the transducer in guide tracks.
SPECIFICATIONS
Input Voltage- 24 VDC +/- 20%
Current Draw- 100 mA Max.
Output- 0 to 10 VDC, 10 to 0 VDC, 4 to 20 mA, 20 to 4 mA
Linearity- +/- 0.05% of stroke or +/- 0.028", whichever is greater
Accuracy- 0.1% of full stroke
Repeatability- +/- 0.01% of full stroke or +/- 0.014", whichever is greater
Operating Temperature- -20o to 70o C
Span Length- 6" to 36" Consult factory for vertical applications over 36" long
Null Zone- 3.00"
Dead Zone- 1.50"
Connector- Standard 4 pin micro 12mm Euro connector
Agency Approvals- CE Approved
Enclosure- IP67
Specification may change without notice.
The 955S BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The 955S Smart BRIK is designed for applications where economical
continuous feedback is necessary. The sensor can be a cost effective replacement to limit and proximity sensors and linear potentiometers.
Applications include presses, blow molding, injection molding, extruding, roll positioning and many more.
SPECIFICATIONS
Input Voltage- 10 - 30 VDC
Current Draw- 100 mA Max.
Output- V0 = 0 - 10, VDCV1 = 10 - 0, VDCV2 = -10 to 10, VDCV3 = 10 to -10, VDCV4 = 0 to 5, VDCV5 = 5 to 0 VDCV6 = -5 to 5, VDCV7 = 5 to -5, VDCC4 = 4 to 20, mAC2 = 20 to 4 mA
Linearity- +/- 0.05% of Full Stroke
Accuracy- +/- 0.1% of Full Stroke
Repeatability- +/- 0.01% of Full Stroke
Operating Temperature- -40o to 158o F (-40o to 70o C)
Span Length- 4" - 180"
Null Zone- 3"
Dead Zone- 1.5"
Connectors- 12mm Micro 4 Pin
Enclosure- IP67, IP68 Optional
Approvals- CE, FM Class I, Div 2 Optional
Specifications are subject to change without notice.
The 956 BLOK is an optional housing for the 955 Brik LDT. This housing adds a chamber, magnet and piston. The streamlined anodized aluminum
extrusion houses the sensing element and electronics. The piston assembly moves over the sensing element that determines the position and
converts it to a readable output. The BLOK is a self-contained unit and does not have a can or a head assembly. Units can be ordered in span
lengths up to 36 inches long in 0.1 inch increments. This transducer can be mounted vertically or horizontally in an application. Optional
spherical rod ends are available.
957N ReadyLinkTM EtherNet/IPTM LDT with RapidRecallTM
DESCRIPTION
The ReadyLinkTM EtherNet/IPTM LDT with RapidRecallTM is our newest linear displacement transducer (LDT) being
developed with an EtherNet/IPTM network interface. The Network LDT provides maximum flexibility for installation and ease of use in
demanding, high-performance, networked industrial applications. EtherNet/IPTM is an Industrial Ethernet implementation of the Common
Industrial Protocol (CIP), managed by the Open DeviceNet Vendor Association (ODVA). EtherNet/IPTM systems require only a single point
network connection for both configuration and control, thus simplifying installation and wiring.
Our linear displacement transducer line utilizes advanced, proven Magnetostrictive technology to provide highly precise and absolute non-contact
position feedback down to 1 micron resolution. We package these sensors to survive in the most demanding and hostile environments.
The AMETEK ReadyLinkTM EtherNet/IPTM LDT with RapidRecallTM is a smart device; it has a RapidRecallTM
Configuration Module to help aid in configuration of the LDT. This module is located on the head assembly of the LDT, next to the connectors.
The RapidRecallTM module can be used to help configure the static IP address of the LDT and store all user defined configurations. In
the module there are three rotary DIP switches that allow the user to configure how the IP address is assigned as well as other functions. Once
the LDT has been configured, these settings can be uploaded to the module. One of the key benefits to uploading the configuration data to the
RapidRecallTM module is that if anything was to ever go wrong with the LDT, the RapidRecallTM module with the entire user
programmed settings can be removed from the original unit and installed on the replacement unit. With a simple setting of the DIP switches the
user configuration settings can be downloaded from the RapidRecallTM module to the new LDT.
FEATURES
• RapidRecallTM Configuration Module
• Supports: Star, Line & DLR (Device Level Ring) topology
• Supports Encoder 22h Profile
• 5 status LEDs to monitor functionality of LDT and Network status
• IP address selection flexibility - Providing both local switch & software setting capability
• Setup via web browser - No special configuration software required
• Ability to backup and restore unit configuration in RapidRecallTM Configuration Module
• Ability to reset unit to factory defaults
• Diagnostics and alarm functionality (web page)
• Status Bits: Position & Velocity out of programmable limits range
• Wide input power operating range (7 - 30VDC) - Standard M12 connector
• IP67 Rated
• Non-contact technology (Magnetostrictive)
• Longevity: Nothing to wear out
• Simplified system wiring
The 957SSI Brik is a magnetostrictive Linear Displacement Transducer (LDT) for highly accurate continuous machine positioning in a variety of
industrial applications. The 957SSI Brik is a magnetostrictive Linear Displacement Transducer (LDT) for highly accurate continuous machine
positioning in a variety of industrial applications. The 957SSI BrikTM provides a Serial Synchronous Interface output signal that is
proportional to the position of the magnet assembly along the length of the probe. The 957SSI BrikTM is a magnetostrictive Linear
Displacement Transducer (LDT) for highly accurate continuous machine positioning in a variety of industrial applications. The 957SSI BrikTM
provides a Serial Synchronous Interface output signal that is proportional to the position of the magnet assembly along the length of the probe.
This sensor is built to withstand the most severe environmental conditions and is completely absolute. This means that power loss will not cause
the unit to lose position information or require re-zeroing. The non-contact design allows this device to be used in highly repetitive
applications without mechanical wear. The 957SSI has auto-tuning capability. This is the ability to sense a magnet other than the standard slide
magnet and adjust its signal strength accordingly. There is an indicator LED that is located at the connector end of the probe and provides
visual status information regarding the operation of the probe. Green indicates proper or normal operation. Red indicates the loss of the
magnetic signal or a probe failure. When the probe is in the normal mode of operation, the LED will remain illuminated green continuously.
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
Formal PDF Quotation
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
Your shopping cart is kept intact and you can still check out at a later time.
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
• Cranes
• Battery Manufacturing
• Fiberglass Winders
• Hydraulic Cylinders
• Crusher/Baler
• Stretch Hooding Machine
• Electric Arc Furnace Cover
• And more
• Actuating Cylinder
• Hydraulic Shoe Brakes
• Solenoid DC Shoe Brakes
• Solenoid AC Shoe Brakes
• Various Replacement Parts
• 1950 Series Snap Switches
• And more
This web site is owned and operated by Brake Products, Inc.
16751 Hilltop Park Place
Chagrin Falls, Ohio 44023
Phone: (440) 543-7962
Fax: (440) 543-7963
Web: www.brakeproducts.com
Email: sales@brakeproducts.com
Federal ID #: 34-1473351
CAGE Code: 1QTP8
DUNS# 14-748-2392
Download: Form W-9
ACH Form: Word / PDF
