|Linear Displacement Transducers
955LC BRIK LDT
The 955LC BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The 955LC BRIK is a self-contained unit and does not have a can or head
assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. Units can be ordered in span lengths up to
180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the transducer in guide tracks.
Input Voltage- 24 VDC +/- 20%
Current Draw- 100 mA Max.
Output- 0 to 10 VDC, 10 to 0 VDC, 4 to 20 mA, 20 to 4 mA
Linearity- +/- 0.05% of stroke or +/- 0.028", whichever is greater
Accuracy- 0.1% of full stroke
Repeatability- +/- 0.01% of full stroke or +/- 0.014", whichever is greater
Operating Temperature- -20o to 70o C
Span Length- 6" to 36" Consult factory for vertical applications over 36" long
Null Zone- 3.00"
Dead Zone- 1.50"
Connector- Standard 4 pin micro 12mm Euro connector
Agency Approvals- CE Approved
Specification may change without notice.
Gemco Ordering Guide
955LC Zero-Span Programming Procedure
Magnets, Cables and Connector Styles