Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,034 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,350 part numbers: Motion Control Products     GLEASON 17,986 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,202 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 916 part numbers: Electrical Control Products   HUBBELL 8,392 part numbers: Electrical Control Products   SUPERBOLT 122 part numbers: Fastening Solutions   RENOLD 406 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

Rotary Limit Switches, Position Sensors, Resolvers, Encoders   1980 Rotating Cam Limit Switch   DESCRIPTION   The Series 1980 Micro-Adjust Rotating Cam Limit Switch is a pilot device used for heavy duty material handling mechanisms, mechanical presses, packaging machines, rotary tables, and in many other applications where repetitive and sequential operations are required in control circuitry. When motion is expressed in shaft rotation, either thru a roller chain, gear train, or directly, the Rotating Cam Limit Switch makes it possible to open or close independent circuits at any desired angular positions. The Series 1980 is available in NEMA 1, NEMA 4 & 5, NEMA 7, NEMA 9, and NEMA 12 enclosures. The units can be ordered with 2 to 40 circuits.   SPECIFICATIONS   Resolver   Resolution - 12 bit resolution (4096 counts) RPM - 1024 max.   DeviceNet   Conformance - This product has been tested by ODVA's authorized Independent Test Lab and found to comply with ODVA Conformance Test Software Version A-12. Power Requirements - 92mA @ 11Vdc typical - 67mA @ 24Vdc typical. InRush - 350mA @ 11Vdc for 20 ms - 450mA @ 25Vdc for 10 ms. Device Type - "Generic" Communications - Group 2 slave only. Messages supported - Polled, Bit Strobed, Explicit. Baud Rates - 125K, 250K, 500K Position Rate - 915 microseconds RPM - 29.29 ms Scale Factor - 2 to 4096 Position Range - 0 to 1 less than scale factor. Setpoints - Separate ON and OFF points for each setpoint. Quantity - 8 Range - 0 to 1 less than scale factor. Approvals - CE Operating Temperature -20oC to +70oC Storage Temperature -40oC to +85oC   • 1980S Rotating Cam Limit Switch Manual • 1980 Ordering Guide and Technical Information • 1950 Precision Snap Switch Information • Drawing Gemco 1950 Snap Switches • Dimension Drawing NEMA 4 RCLS 2-40 CIR W SDGR • NEMA 7 and NEMA 9 Explosion-Proof Statement, Rev A       1980 Rotating Cam Limit Switch Set-up Procedure No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-P0034600 Ametek Gemco Cam Tool  Part P0034600  Old Part P-346-B  Timing & Dwell Adjustment Tool  For 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 7 Days  Dated 01-2023  (1LB) H 4" L 5" W 4" Box 18 $5.00                                 Stand Alone Brake Monitoring Module and Accessories No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-SD0202900 Ametek Gemco Stand Alone Brake Monitor Module  Part SD0202900  NEMA 1 Enclosure with Cover and Shaft  Ships in 2 Weeks  Dated 01-2021 - 0 $306.00 2 AME-SD0213300 Ametek Gemco Stand Alone Brake Monitor Module  Part SD0213300  NEMA 12 Enclosure with Cover & Shaft  Ships in 3 Weeks, Peck MI  Dated 01-2021 - 0 $409.00 3 AME-SD0117800 Ametek Gemco Cam 1980  Part SD0117800  Old Part SD-1178-C  Mold # P.268.B  Standard Adjustable Cam Assembly  Parts P0035600 & P0035700  Includes 2 Roll Pins for installation  For some - most 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2024  (1LB) H 4" L 6" W 4" Box 0 $146.00 4 AME-SD0197700 Ametek Gemco Disc  Part SD0197700  Electronic Pulse Generating Disc  Optical Pulse Disc for 1980 Series RCS  Normally aStock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2021  (1LB) H 4" L 6" W 4" Box - 1 $100.00 5 AME-SD0194800 Ametek Gemco Electronic Pulse Generating Switch, 5 Volt DC for Brake Monitor  (1LBS) H 6.00" L 3.50" W 0.50"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $395.28 6 AME-SD0157100 Ametek Gemco Roller Follower Assembly  Part SD0157100  aka P-518-B P-520-B  Limit Switch Roller Follower  Mounts between the Cam & Snap Switch  Increases switch life on 1980 Series Cam Box's  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2024  (1LB) H 4" L 5" W 4" Box 120 $35.00 7 AME-1950-1-B-A-AO Ametek Gemco Switch 1950  Part 1950-1-B-A-AO  19501BAA0  1950 = Precision, Snap Action, Switch Assembly  1 = SPDT, Single Pole Double Throw  can be wired for N.O or N.C. Circuit  Four Screw Terminals  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC / DC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2024  (1LB) H 4" L 5" W 4" Box 0 $59.00 8 AME-1950-4-B-A-AO Ametek Gemco Switch 1950  Part 1950-4-B-A-AO  19504BAAO  19504BAA0  1950 = Precision, Snap Action, Switch Assembly  4 = Double Pole Double Throw / D.P.D.T.  Eight Screw Terminals, can be wired for Normally Open or   Normally Close Circuits  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals, Qty., 8  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (1LB) H 4" L 5" W 4" Box 0 $116.00 Add-On Brake Monitoring Module and Accessories No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-SD0195800 Ametek Gemco Module  Add-On, Brake Monitor Module Assembly  NEMA 1 Enclosure with Cover & Shaft  [1/2017]  [1/2018]  [1/2018] - 0 $306.00 2 AME-SD0117800 Ametek Gemco Cam 1980  Part SD0117800  Old Part SD-1178-C  Mold # P.268.B  Standard Adjustable Cam Assembly  Parts P0035600 & P0035700  Includes 2 Roll Pins for installation  For some - most 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2024  (1LB) H 4" L 6" W 4" Box 0 $146.00 3 AME-SD0197700 Ametek Gemco Disc  Part SD0197700  Electronic Pulse Generating Disc  Optical Pulse Disc for 1980 Series RCS  Normally aStock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2021  (1LB) H 4" L 6" W 4" Box - 1 $100.00 4 AME-SD0194800 Ametek Gemco Electronic Pulse Generating Switch, 5 Volt DC for Brake Monitor  (1LBS) H 6.00" L 3.50" W 0.50"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $395.28 5 AME-SD0157100 Ametek Gemco Roller Follower Assembly  Part SD0157100  aka P-518-B P-520-B  Limit Switch Roller Follower  Mounts between the Cam & Snap Switch  Increases switch life on 1980 Series Cam Box's  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2024  (1LB) H 4" L 5" W 4" Box 120 $35.00 6 AME-1950-1-B-A-AO Ametek Gemco Switch 1950  Part 1950-1-B-A-AO  19501BAA0  1950 = Precision, Snap Action, Switch Assembly  1 = SPDT, Single Pole Double Throw  can be wired for N.O or N.C. Circuit  Four Screw Terminals  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC / DC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2024  (1LB) H 4" L 5" W 4" Box 0 $59.00 7 AME-1950-4-B-A-AO Ametek Gemco Switch 1950  Part 1950-4-B-A-AO  19504BAAO  19504BAA0  1950 = Precision, Snap Action, Switch Assembly  4 = Double Pole Double Throw / D.P.D.T.  Eight Screw Terminals, can be wired for Normally Open or   Normally Close Circuits  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals, Qty., 8  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (1LB) H 4" L 5" W 4" Box 0 $116.00 1980 Rotating Cam Limit Switch No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-1980-101-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-101-D-DP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $971.00 2 AME-1980-101-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-101-D-SP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" 0 $919.00 3 AME-1980-101-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-101-L-DP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $884.00 4 AME-1980-101-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-101-L-SP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $832.00 5 AME-1980-101-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-101-R-DP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $884.00 6 AME-1980-101-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-101-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  01 = 1 Independent Cam / Circuit / Switch   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  (10LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $832.00 7 AME-1980-101-X-DP-X-M-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-101-X-DP-X-M-3-R  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  3 - Gear Multiplier ratio 1:3  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,335.00 8 AME-1980-102-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-D-DP-X  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,117.00 9 AME-1980-102-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-D-SP-TD1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,310.00 10 AME-1980-102-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-D-SP-X  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,013.00 11 AME-1980-102-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-102-L-DP-X  Series 1980  1 = NEMA 1 Enclosure  02 = 2 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switch U.L. Listed   X = No Timing Dial or Dial Window is provided  3 Year Warranty  (11 LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,030.00 12 AME-1980-102-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-102-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuit  4 screw terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" 0 $926.00 13 AME-1980-102-R-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-102-R-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  2 = 2 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $939.60 14 AME-1980-102-R-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-102-R-DP-X  Series 1980  1 = NEMA 1 Enclosure  02 = 2 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switch U.L. Listed   X = No Timing Dial or Dial Window is provided  3 Year Warranty  (11LBS) H 12.00" L 10.00" W 8.00"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,030.00 15 AME-1980-102-R-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-R-SP-R-TD1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,255.00 16 AME-1980-102-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-R-SP-TD1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,223.00 17 AME-1980-102-R-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch  Part AME-1980-102-R-SP-TD4  NEMA 1 Enclosure  2 Circuit  Right Hand shaft Extension  SPDT Switches, Single Pole Double Throw  Timing Dial Labeled for CCW Rotation  [Amazon] Dated 1/17  (14LBS) H 8" L 18" W 12" Box  [1/2018]  [1/2018] 0 $1,223.00 18 AME-1980-102-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-102-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $926.00 19 AME-1980-102-X-DP-TD1-R-20-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-TD1-R-20-R1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,564.00 20 AME-1980-102-X-DP-X-R-30-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-30-L1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 21 AME-1980-102-X-DP-X-R-3-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-3-L1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 22 AME-1980-102-X-DP-X-R-50-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-50-R1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  50 - Right Angle Gear Reducer ratio 50:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 23 AME-1980-102-X-DP-X-R-5-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-5-L1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 24 AME-1980-102-X-DP-X-R-64-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-64-R1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  64 - Right Angle Gear Reducer ratio 64:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 25 AME-1980-102-X-DP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-S-5-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,481.00 26 AME-1980-102-X-DP-X-S-7-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-S-7-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  7 - Straight Drive Gear Reducer ratio 7:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,481.00 27 AME-1980-102-X-SP-X-R-10-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-R-10-R2  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,163.00 28 AME-1980-102-X-SP-X-R-32-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-102-X-SP-X-R-32-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  2 = 2 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  32 = 32 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,163.00 29 AME-1980-102-X-SP-X-R-4-L6 Ametek Gemco Rotating Cam Limit Switch Model 1980-102-X-SP-X-R4-L6  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  2 = 2 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  4 = 4 to 1 Gear Ratio  L6 = Left End Gear Reducer Shaft Location 6  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,529.28 30 AME-1980-102-X-SP-X-R-60-L1 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-102-X-SP-X-R-60-L1  1980102XSPXR60L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  2 = 2 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  60 = 60 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  Ships in 5 Weeks, Peck MI  Dated 05-2022  (14LBS) H 8" L 18" W 12" Box 0 $2,163.00 31 AME-1980-102-X-SP-X-R-6-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-R-6-L8  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,163.00 32 AME-1980-102-X-SP-X-R-7-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-R-7-L1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,163.00 33 AME-1980-102-X-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-1-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 34 AME-1980-102-X-SP-X-S-20-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-20-L  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 35 AME-1980-102-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-20-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 36 AME-1980-102-X-SP-X-S-25-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-25-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  25 - Straight Drive Gear Reducer ratio 25:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 37 AME-1980-102-X-SP-X-S-400-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-400-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 38 AME-1980-102-X-SP-X-S-4-L Ametek Gemco Rotating Cam Limit Switch Model 1980-102-X-SP-X-S-4-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  2 = 2 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S= Straight Angle Gear Reducer  4 = 4 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,680.48 39 AME-1980-102-X-SP-X-S-7-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-7-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  7 - Straight Drive Gear Reducer ratio 7:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 40 AME-1980-103-D-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-DP-R-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,308.00 41 AME-1980-103-D-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-DP-TD1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,557.00 42 AME-1980-103-D-DP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-103-D-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  03 = 3 Independent Circuits / Switches / Cams   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extensions from Enclosure, 2   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch, # 1950-4-B-A-AO  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter Clock Wise Rotation  3 Year Limited Warranty  (13LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,557.00 43 AME-1980-103-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-DP-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,260.00 44 AME-1980-103-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-SP-TD1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,401.00 45 AME-1980-103-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-SP-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,104.00 46 AME-1980-103-L-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (11LBS)  (14LBS) H 8.00" L 18.00" W 12.00"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $1,470.00 47 AME-1980-103-L-DP-TD2 Ametek Gemco Rotating Cam Limit Switch  Model 1980-103-L-DP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  8 screw terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for C.C.W. Rotation  3 Year Limited Warranty  Ships in 2 Weeks  Dated 1-19  (14LBS) H 8" L 18" W 12" Box 0 $1,470.00 48 AME-1980-103-L-DP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-L-DP-TD3  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,470.00 49 AME-1980-103-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,173.00 50 AME-1980-103-L-SPK-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-103-L-SPK-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SPK = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches   Which can be wired for either a N.O.or a N.C. Circuit.   With 4 Clamp Terminals per switch  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  [Amazon] 1/17  (12LBS) H 8" L 12" W 10" Box  [1/2018]  [1/2018] 0 $1,065.00 51 AME-1980-103-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-103-L-SP-TD1  1980103LSPTD1  1980 = Series Rotating Cam Limit Switch  1 = NEMA 1 Enclosure  03 = 3 Independent Circuits - Cam - Switches  L = Left Hand Shaft Extension  SP = S.P.D.T. Single Pole, Double Throw Snap Switches  TD1 = Timing Dial Installed, Labeled for CW Rotation, Mounting Horizontal  Ships in 10 Days, Peck MI  Dated 01-2020  (14LBS) H 8" L 18" W 12" Box 9 $1,314.00 52 AME-1980-103-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for C.C.W. Rotation  3 Year Limited Warranty (11LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,314.00 53 AME-1980-103-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-103-L-SP-X  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   1980 = Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per Switch  X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 2 Weeks  Dated 1-19  (14LBS) H 8" L 12" W 12" Box 0 $1,017.00 54 AME-1980-103-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-DP-R-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,221.00 55 AME-1980-103-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-DP-TD1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,470.00 56 AME-1980-103-R-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-DP-TD2  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,470.00 57 AME-1980-103-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-DP-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,173.00 58 AME-1980-103-R-SP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-SP-R-TD2  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,362.00 59 AME-1980-103-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-SP-R-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,065.00 60 AME-1980-103-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-103-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03= 3 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial Labeled for Clockwise Rotation  3 Year Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 3 $1,314.00 61 AME-1980-103-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-SP-TD2  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,314.00 62 AME-1980-103-R-SP-TD4 Ametek Gemco Rotating Cam Limit Switch Part 1980-103-R-SP-TD4  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03= 3 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD4 = Timing Dial, Counter Clockwise Rotation  (14LBS) H 8" L 18" W 12" Box  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,314.00 63 AME-1980-103-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-103-R-SP-X  aka 1980103RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The Micro-Adjust Cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees   1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams - Circuits - Switches   R = Right Hand Shaft Extension from Enclosure   SP = S.P.D.T. Switches - Single Pole Double Throw, Precision Snap Action  Gemco Mfg., UL Listed Switches Assembly File E56660   Which can be wired for either a N.O or a N.C. Circuit  4 screw terminals per switch  X = No other options  3 Year Limited Warranty  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 10-2021  (14LBS) H 10" L 12" W 9" Box 0 $1,017.00 64 AME-1980-103-X-DP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-R-5-L7  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,410.00 65 AME-1980-103-X-DP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-R-5-R1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,410.00 66 AME-1980-103-X-DP-X-S-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-S-2-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,624.00 67 AME-1980-103-X-DP-X-S-32-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-S-32-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  32 - Straight Drive Gear Reducer ratio 32:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,624.00 68 AME-1980-103-X-DP-X-S-48-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-S-48-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  48 - Straight Drive Gear Reducer ratio 48:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,624.00 69 AME-1980-103-X-SP-R-X-R-2-R5 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-R-X-R-2-R5  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  R5 - Right end position 5;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,302.00 70 AME-1980-103-X-SP-TD1-R-6-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TD1-R-6-R1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,551.00 71 AME-1980-103-X-SP-TD1-S-15-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TD1-S-15-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  15 - Straight Drive Gear Reducer ratio 15:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,765.00 72 AME-1980-103-X-SP-TD1-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TD1-S-24-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,765.00 73 AME-1980-103-X-SP-TD1-S-36-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TD1-S-36-L  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,765.00 74 AME-1980-103-X-SP-TW1-S-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TW1-S-2-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TW1 - Timing Dial: CW Rotation, Mounting: Horizontal, Window;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,841.00 75 AME-1980-103-X-SP-X-R-4-R7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-R-4-R7  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R7 - Right end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,254.00 76 AME-1980-103-X-SP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-R-8-R1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,254.00 77 AME-1980-103-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-10-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 78 AME-1980-103-X-SP-X-S-1-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-1-L  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 79 AME-1980-103-X-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-1-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 80 AME-1980-103-X-SP-X-S-200-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-200-L  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  200 - Straight Drive Gear Reducer ratio 200:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 81 AME-1980-103-X-SP-X-S-28-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-28-L  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  28 - Straight Drive Gear Reducer ratio 28:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 82 AME-1980-104-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-104-D-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extensions from Enclosure, 2   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (13LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 2 $1,406.00 83 AME-1980-104-D-SP-R-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-D-SP-R-TD3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,559.00 84 AME-1980-104-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shafts Extending from Enclosure, 2  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,495.00 85 AME-1980-104-D-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-104-D-SP-X  1980104DSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Double, 2 Shaft Extensions from the enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 3 Weeks, Peck MI  Dated 01-2023 1 $1,198.00 86 AME-1980-104-L-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-L-DP-R-X  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,383.00 87 AME-1980-104-L-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-104-L-DP-TD1  1980104LDPTD1  1980 = Series  1 = NEMA 1  04 = 4 Circuits  L = Left Hand shaft Extension  DP = D.P.D.T. Switches, UL Listed  TD1 = Timing Dial, Labeled for CW Rotation  Ships in 2 Weeks, Peck MI  Dated 01-2021  (14LBS) H 8" L 14" W 12" Box 0 $1,616.00 88 AME-1980-104-L-DP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-104-L-DP-X  aka 1980104LDPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches   L = Left Hand Shaft Extension from Enclosure   DP = D.P.D.T. Switches / Double Pole Double Throw, Snap Action  Switches can be wired for N.O. or N.C. Circuits  8 Screw Terminals per Switch  Switch Part 1950-4-B-A-AO, UL Listed  X = No other options  3 Year Limited Warranty  Ships in 2 Weeks  Dated 1-19  (14LBS) H 8" L 18" W 12" Box 0 $1,319.00 89 AME-1980-104-L-SP-R-X Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-R-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,175.00 90 AME-1980-104-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for Clockwise Rotation  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 91 AME-1980-104-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter Clockwise Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 92 AME-1980-104-L-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-L-SP-TD3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 93 AME-1980-104-L-SP-TW1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-L-SP-TW1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TW1 - Timing Dial: CW Rotation, Mounting: Horizontal, Window;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,484.00 94 AME-1980-104-L-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-104-L-SP-X  1980104LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a Tool Supplied or by hand  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (12LBS) H 8" L 12" W 10" Box 0 $1,111.00 95 AME-1980-104-R-DP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-DP-R-TD1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,680.00 96 AME-1980-104-R-DP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-DP-R-TD2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,680.00 97 AME-1980-104-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-DP-TD1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,616.00 98 AME-1980-104-R-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-DP-TD2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,616.00 99 AME-1980-104-R-DP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-104-R-DP-X  1980104RDPX  Series 1980 Cam Box featuring Cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams - Circuits - Switches   Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   DP = D.P.D.T. Switches - Double Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  8 Screw Terminals per switch  Switch Part 1950-4-B-A-A0  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No other options  3 Year Limited Warranty  Ships in 3 Weeks, Peck MI  Dated 01-2024  (14LBS) H 8" L 14" W 10" Box 0 $1,319.00 100 AME-1980-104-R-SPK-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-SPK-X  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SPK - SPDT with Clamp Terminal;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,175.00 101 AME-1980-104-R-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-SP-R-TD1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,472.00 102 AME-1980-104-R-SP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-SP-R-TD2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,472.00 103 AME-1980-104-R-SP-R-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-104-R-SP-R-X  1980104RSPRX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture & dust protection   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 3 Weeks, Peck MI  Dated 10-2021  (14LBS) H 8" L 14" W 12" Box 1 $1,175.00 104 AME-1980-104-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $1,408.00 105 AME-1980-104-R-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter C.W. Rotation  3 Year Limited Warranty  (10LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 106 AME-1980-104-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-SP-TD3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 107 AME-1980-104-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-104-R-SP-X  1980104RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied  and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty, FOB Peck MI  Normally a Stock Item @ BPI  Ships from Stock to 4 Weeks  Dated 01-2024  (12LBS) H 8" L 12" W 10" Box 2 $1,111.00 108 AME-1980-104-X-DP-R-TD1-R-20-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DPR-TD1-R-20-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DPR = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R = Right Angle Gear Reducer  20 = 20 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  3 to 4 Weeks to Ship  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,072.52 109 AME-1980-104-X-DP-R-TD1-R-24-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DPR-TD1-R24-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R = Right Angle Gear Reducer  24 = 24 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  3 to 4 Weeks to Ship  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $2,917.00 110 AME-1980-104-X-DP-R-TD1-R-30-L8 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DPR-TD1-R30-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R= Right Angle Gear Reducer  30 = 30 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  3 to 4 Weeks to Ship  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,072.52 111 AME-1980-104-X-DP-X-R-10-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-10-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 112 AME-1980-104-X-DP-X-R-16-L8 Ametek Gemco Rotating Cam Limit Switch  Part 1980-104-X-DP-X-R-16-L-8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  16 = 16 to 1 Gear Ratio  L8 = Left End Gear Reducer Shaft Location 8   (15LBS) H 8" L 18" W 12" Box  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 113 AME-1980-104-X-DP-X-R-16-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-16-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  16 - Right Angle Gear Reducer ratio 16:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 114 AME-1980-104-X-DP-X-R-18-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-18-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  18 - Right Angle Gear Reducer ratio 18:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 115 AME-1980-104-X-DP-X-R-1-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-1-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 116 AME-1980-104-X-DP-X-R-2.5-L2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-2.5-L2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2.5 - Right Angle Gear Reducer ratio 2.5:1  Shaft Location:  L2 - Left end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 117 AME-1980-104-X-DP-X-R-2.5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-2.5-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2.5 - Right Angle Gear Reducer ratio 2.5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 118 AME-1980-104-X-DP-X-R-2.5-R7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-2.5-R7  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2.5 - Right Angle Gear Reducer ratio 2.5:1  Shaft Location:  R7 - Right end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 119 AME-1980-104-X-DP-X-R-24-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-24-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  24 - Right Angle Gear Reducer ratio 24:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 120 AME-1980-104-X-DP-X-R-24-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-24-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  24 - Right Angle Gear Reducer ratio 24:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 121 AME-1980-104-X-DP-X-R-28-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-28-L8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  28 - Right Angle Gear Reducer ratio 28:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 122 AME-1980-104-X-DP-X-R-28-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-28-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  28 - Right Angle Gear Reducer ratio 28:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 123 AME-1980-104-X-DP-X-R-4-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-4-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 124 AME-1980-104-X-DP-X-R-5-L2 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-R-5-L-2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L2 = Left End Gear Reducer Shaft Location 2 (15LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 125 AME-1980-104-X-DP-X-R-5-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-R-5-L-7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7 / Bottom Left / Left End View  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 126 AME-1980-104-X-DP-X-R-6-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-6-R8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 127 AME-1980-104-X-DP-X-R-7-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-7-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 128 AME-1980-104-X-DP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-8-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 129 AME-1980-104-X-DP-X-S-1.33-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-1.33-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1.33 - Straight Drive Gear Reducer ratio 1.33:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 130 AME-1980-104-X-DP-X-S-1000-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-1000-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  1000 = 1000 to 1 Gear Ratio  R = Right End Gear Reducer Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,962.36 131 AME-1980-104-X-DP-X-S-10-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-10-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 132 AME-1980-104-X-DP-X-S-10-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-10-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  10 = 10 to 1 Gear Ratio  R = Right End Gear Reducer  (18LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 133 AME-1980-104-X-DP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-1-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 134 AME-1980-104-X-DP-X-S-20-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-20-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 135 AME-1980-104-X-DP-X-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-24-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 136 AME-1980-104-X-DP-X-S-25-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-25-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  25 - Straight Drive Gear Reducer ratio 25:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 137 AME-1980-104-X-DP-X-S-25-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-25-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  25 = 25 to 1 Gear Ratio  R = Right End Gear Reducer  (18LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 138 AME-1980-104-X-DP-X-S-36-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-36-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 139 AME-1980-104-X-DP-X-S-3-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-3-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 140 AME-1980-104-X-DP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-3-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 141 AME-1980-104-X-DP-X-S-400-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-400-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 142 AME-1980-104-X-DP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-5-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 143 AME-1980-104-X-DP-X-S-6-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-6-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 144 AME-1980-104-X-DP-X-S-80-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-80-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 145 AME-1980-104-X-SP-R-TD1-R-30-L8 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SPR-TD1-R30-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R= Right Angle Gear Reducer  25 = 25 to 1 Gear Ratio  L8 = Left End Gear Reducer Shaft Location 8  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,921.32 146 AME-1980-104-X-SP-R-TD1-S-1.5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-R-TD1-S-1.5-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1.5 - Straight Drive Gear Reducer ratio 1.5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,923.00 147 AME-1980-104-X-SP-R-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-R-X-S-10-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,626.00 148 AME-1980-104-X-SP-R-X-S-4-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-R-X-S-4-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,626.00 149 AME-1980-104-X-SP-TD1-R-1-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-TD1-R-1-L1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,645.00 150 AME-1980-104-X-SP-TD1-R-36-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-TD1-R-36-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  36 - Right Angle Gear Reducer ratio 36:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,645.00 151 AME-1980-104-X-SP-TD1-S-100-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-TD1-S-100-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial Labeled for Clock Wise Rotation  S = Straight Drive Gear Reducer  100 = 100 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 11 $2,020.68 152 AME-1980-104-X-SP-TD1-S-15-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-TD1-S-15-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  15 - Straight Drive Gear Reducer ratio 15:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,859.00 153 AME-1980-104-X-SP-TD1-S-50-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-TD1-S-50-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  50 - Straight Drive Gear Reducer ratio 50:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,859.00 154 AME-1980-104-X-SP-X-M-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-M-2-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  2 - Gear Multiplier ratio 1:2  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 155 AME-1980-104-X-SP-X-M-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-M-4-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  4 - Gear Multiplier ratio 1:4  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 156 AME-1980-104-X-SP-X-R-10-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-10-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 157 AME-1980-104-X-SP-X-R-12-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-12-L1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  12 - Right Angle Gear Reducer ratio 12:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 158 AME-1980-104-X-SP-X-R-15-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-15-L1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  15 - Right Angle Gear Reducer ratio 15:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 159 AME-1980-104-X-SP-X-R-16-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-16-L8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  16 - Right Angle Gear Reducer ratio 16:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 160 AME-1980-104-X-SP-X-R-1-L6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-1-L6  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L6 - Left end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 161 AME-1980-104-X-SP-X-R-1-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-1-L7  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 162 AME-1980-104-X-SP-X-R-1-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-1-R3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 163 AME-1980-104-X-SP-X-R-1-R5 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R1-R5  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  R5 = Right End Gear Reducer Shaft Location 5  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,659.96 164 AME-1980-104-X-SP-X-R-2-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-2-R3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 165 AME-1980-104-X-SP-X-R-30-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-30-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 166 AME-1980-104-X-SP-X-R-3-L6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-3-L6  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L6 - Left end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 167 AME-1980-104-X-SP-X-R-3-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-3-L7  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 168 AME-1980-104-X-SP-X-R-3-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-3-R3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 169 AME-1980-104-X-SP-X-R-4.75-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-4.75-L8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4.75 - Right Angle Gear Reducer ratio 4.75:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 170 AME-1980-104-X-SP-X-R-4.75-R8 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-4.75-R8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  4.75 = 4.75 to 1 Gear Ratio  R8 = Right End Gear Reducer Shaft Location 8  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,659.96 171 AME-1980-104-X-SP-X-R-400-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-400-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  400 = 400 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,659.96 172 AME-1980-104-X-SP-X-R-4-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-4-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  4 = 4 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,659.96 173 AME-1980-104-X-SP-X-R-4-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-4-L8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 174 AME-1980-104-X-SP-X-R-4-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-4-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 175 AME-1980-104-X-SP-X-R-5-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-5-L1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 176 AME-1980-104-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-5-L7  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 177 AME-1980-104-X-SP-X-R-5-R1 Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-104-X-SP-X-R-5-R-1  1980104XSPXR5R1  1980 = Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Switch Settings 4 to 356 Degrees   Adjusted by use of a tool supplied and mounted inside the enclosure or by hand  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams - Circuits - Switches   X = No shaft extension opposite gearbox / no double shaft extension   SP = S.P.D.T. Switches - Single Pole Double Throw, Snap Action, U.L. Listed  which can be wired for either a N.O. or N.C. Circuits  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial is to be provided  R = Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R = Right End Gear Reducer   1 = Shaft Location 1  Ships 3 Weeks, Peck MI  Dated 01-2020  (14LBS) H 8" L 16" W 12" Box 0 $2,348.00 178 AME-1980-104-X-SP-X-R-5-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-5-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 179 AME-1980-104-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-5-R3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 180 AME-1980-104-X-SP-X-R-7-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-7-L7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  7 = 7 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 181 AME-1980-104-X-SP-X-R-7-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-7-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 182 AME-1980-104-X-SP-X-R-8-R1 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-104-X-SP-X-R-8-R1  1980 = 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  8 = 8 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  Ships in 3 to 4 Weeks, Peck MI  Dated 01-2021  (14LBS) H 8" L 18" W 12" Box 0 $2,348.00 183 AME-1980-104-X-SP-X-R-8-R6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-8-R6  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R6 - Right end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 184 AME-1980-104-X-SP-X-S-100-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-100-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  100 = 100 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $2,562.00 185 AME-1980-104-X-SP-X-S-10-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-10-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  10 = 10 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 186 AME-1980-104-X-SP-X-S-12-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-12-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 187 AME-1980-104-X-SP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-12-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 188 AME-1980-104-X-SP-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-14-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 189 AME-1980-104-X-SP-X-S-14-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-14-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 190 AME-1980-104-X-SP-X-S-16-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-16-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  16 - Straight Drive Gear Reducer ratio 16:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 191 AME-1980-104-X-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-1-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 192 AME-1980-104-X-SP-X-S-200-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-200-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  200 = 200 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 193 AME-1980-104-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-20-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 194 AME-1980-104-X-SP-X-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-24-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 195 AME-1980-104-X-SP-X-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-30-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  30 - Straight Drive Gear Reducer ratio 30:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 196 AME-1980-104-X-SP-X-S-400-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-400-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 197 AME-1980-104-X-SP-X-S-48-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-48-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  48 - Straight Drive Gear Reducer ratio 48:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 198 AME-1980-104-X-SP-X-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-5-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 199 AME-1980-104-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-5-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 200 AME-1980-104-X-SP-X-S-60-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-60-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 201 AME-1980-104-X-SP-X-S-6-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-6-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 202 AME-1980-104-X-SP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-6-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 203 AME-1980-104-X-SP-X-S-8-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-8-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8 - Straight Drive Gear Reducer ratio 8:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 204 AME-1980-104-Y-DP-R-X-R-48-R2 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-Y-DP-R-X-R48-R2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches  Y = Shaft Extension Opposite the Gear Box, Dual Shaft  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  R = Rubber Boots on the switch plunger for additional dust & moisture protection   X = No Timing Dial  R = Right Angle Gear Reducer  48 = 48 to 1 Gear Ratio  R2 = Right End Gear Reducer Shaft Location 2 / Right Side Lower Postion / End View 1/15  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,707.00 205 AME-1980-104-Y-DP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-104-Y-DP-X-S-4-R  1980104YDPXS4R  1980-104, NEMA 1, Circuits: 4  Shaft Extension:  Y - Shaft Extension Opposite Gear Box  Switch:  DP - Double Pole, Double Throw  Timing Dial and Mounting:  X - None  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End  Ships in 3 Weeks  Dated 01-2020  (16LBS) H 8" L 18" W 12" 0 $2,857.00 206 AME-1980-104-Y-DP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-5-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,857.00 207 AME-1980-104-Y-DP-X-S-60-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-60-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,857.00 208 AME-1980-104-Y-DP-X-S-60-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-60-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,857.00 209 AME-1980-104-Y-SP-X-R-1.5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-104-Y-SP-X-R-1.5-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1.5 - Right Angle Gear Reducer ratio 1.5:1  Shaft Location:  R1 - Right end position 1  Ships in 3 Weeks, Peck MI  Dated 1-20  (14LBS) H 8" L 18" W 12" Box 0 $2,435.00 210 AME-1980-104-Y-SP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-R-5-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,435.00 211 AME-1980-104-Y-SP-X-S-1-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-S-1-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,649.00 212 AME-1980-104-Y-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-S-1-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,649.00 213 AME-1980-104-Y-SP-X-S-3-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-S-3-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,649.00 214 AME-1980-104-Y-SP-X-S-4-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-S-4-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,649.00 215 AME-1980-105-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-D-DP-X  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,925.00 216 AME-1980-105-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-D-SP-TD1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,962.00 217 AME-1980-105-L-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-L-DP-TD1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,135.00 218 AME-1980-105-L-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-L-DP-TD2  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,135.00 219 AME-1980-105-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-L-DP-X  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,838.00 220 AME-1980-105-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-105-L-SP-TD1  Series 1980  1 = NEMA 1 Enclosure  05 = 5 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw Snap Action Switches U.L. Listed  TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,875.00 221 AME-1980-105-L-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-105-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,578.00 222 AME-1980-105-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-R-DP-R-X  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,918.00 223 AME-1980-105-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-R-DP-TD1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,135.00 224 AME-1980-105-R-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  05 = 5 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch  X = No Timing Dial or Dial Window is provided  3 Year Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,838.00 225 AME-1980-105-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,875.00 226 AME-1980-105-R-SP-TW1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-R-SP-TW1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TW1 - Timing Dial: CW Rotation, Mounting: Horizontal, Window;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,951.00 227 AME-1980-105-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,578.00 228 AME-1980-105-X-DP-X-R-10-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-DP-X-R-10-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,075.00 229 AME-1980-105-X-DP-X-R-48-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-DP-X-R-48-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  48 - Right Angle Gear Reducer ratio 48:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,075.00 230 AME-1980-105-X-DP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-DP-X-R-5-R3  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,075.00 231 AME-1980-105-X-DP-X-R-7-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-DP-X-R-7-L1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,075.00 232 AME-1980-105-X-SP-R-X-S-28-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-R-X-S-28-L  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  28 - Straight Drive Gear Reducer ratio 28:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,109.00 233 AME-1980-105-X-SP-TD1-R-36-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-TD1-R-36-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  36 - Right Angle Gear Reducer ratio 36:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,112.00 234 AME-1980-105-X-SP-TD1-R-8-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-TD1-R-8-R4  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,112.00 235 AME-1980-105-X-SP-TD1-S-18-R Ametek Gemco Rotating Cam Limit Switch  Model AME-1980-105-X-SP-TD1-S-18-R  1980 = Series Cam Limit switch  1 = NEMA 1 Enclosure  05 = 5 Circuits / Switches / Cams  X = No Shaft Extension Opposite thee Gear Box  SP = SPDT, Single Pole Double Throw Switches  TD1 = Timing Dial labeled for Clock Wise Rotation  S = Straight Drive Gear Reducer   18 = 18 to 1 Gear Reducer Ratio  R = Right, Gear Reducer Mounted to the Right End  [Amazon] Dated 1/17  (4LBS) H 8" L 18" W 12" Box  [1/2018]  [1/2018] 0 $3,326.00 236 AME-1980-105-X-SP-TD1-S-50-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-TD1-S-50-R  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  50 - Straight Drive Gear Reducer ratio 50:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,326.00 237 AME-1980-105-X-SP-TD1-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-TD1-S-5-L  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,326.00 238 AME-1980-105-X-SP-X-R-10-L7 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-105-X-SP-X-R-10-L7  1980105XSPXR10L7  1980 = 1980 Series Cam Limit Switch  1 = NEMA 1 Enclosure  05 = 5 Independent circuits - Switches - Cams  X = No Shaft Extension Opposite Gear Box  SP = Single Pole, Double Throw  X = No Switch Options  R = Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  L = Left End Reducer & Shaft  7 = Shaft Position 7  Ships in 3 Weeks, Peck MI  Dated 01-01-2021  (14LBS) H 8" L 14" W 12" Box 0 $2,815.00 239 AME-1980-105-X-SP-X-R-10-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-R-10-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 240 AME-1980-105-X-SP-X-R-1-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-105-X-SP-X-R-1-L7  Series 1980  1 = NEMA 1 Enclosure  05 = 5 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw Precision Snap Action Switches  X = No Timing Dial  R= Right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 241 AME-1980-105-X-SP-X-R-1-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-R-1-R3  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 242 AME-1980-105-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-R-5-L7  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 243 AME-1980-105-X-SP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-R-8-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 244 AME-1980-105-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-S-10-R  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,029.00 245 AME-1980-105-X-SP-X-S-14-R Ametek Gemco Rotating Cam Limit Switch Model 1980-105-X-SP-X-S-14-R  Series 1980  1 = NEMA 1 Enclosure  5 = 5 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw  X = No Timing Dial  S= Straight Drive Gear Reducer  14 = 14 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,029.00 246 AME-1980-105-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-S-5-R  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,029.00 247 AME-1980-105-Y-SP-TD1-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-Y-SP-TD1-S-5-L  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,413.00 248 AME-1980-106-D-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-D-DP-TD1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,381.00 249 AME-1980-106-D-DP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-D-DP-TD3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,381.00 250 AME-1980-106-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-106-D-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual / Left & Right Hand Shaft Extensions from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   3 Year Limited Warranty (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,084.00 251 AME-1980-106-D-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-D-SP-R-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,868.00 252 AME-1980-106-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual / Left & Right Hand Shaft Extensions from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,069.00 253 AME-1980-106-D-SP-TD2 Ametek Gemco Rotating Cam Limit Switch  Model 1980-106-D-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shafts Extending from Enclosure, 2  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuit  4 screw terminals per switch  Switch Settings 4 to 356 Degrees  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter Clock Wise Rotation  3 Year Limited Warranty  Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $2,069.00 254 AME-1980-106-D-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-106-D-SP-X  aka 1980106DSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   D = Double Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuits  4 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  Ships in 2 Weeks  Dated 01-2023  (14LBS) H 8" L 18" W 12" Box 1 $1,772.00 255 AME-1980-106-L-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-L-DP-R-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,093.00 256 AME-1980-106-L-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-L-DP-TD2  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,294.00 257 AME-1980-106-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-106-R-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,997.00 258 AME-1980-106-L-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-L-SP-R-TD1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,078.00 259 AME-1980-106-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 260 AME-1980-106-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-L-SP-TD2  Series 1980  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD2 = Timing Dial Labeled for C.C.Wise Rotation  3 year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 261 AME-1980-106-L-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-L-SP-TD3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 262 AME-1980-106-L-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-106-L-SP-X  1980106LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The Micro-Adjust Cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O.or a N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial is to be provided  3 Year Limited Warranty  Ships in 6 Weeks, Peck MI  Dated 01-2023  (14LBS) H 8" L 14" W 8" Box 0 $1,685.00 263 AME-1980-106-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-DP-R-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,093.00 264 AME-1980-106-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-DP-TD1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,294.00 265 AME-1980-106-R-DP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-R-DP-TD2  Series 1980  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switches  TD2 = Timing Dial C.C.W. Counter Clock Wise Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,294.00 266 AME-1980-106-R-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-106-R-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,997.00 267 AME-1980-106-R-SPK-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-SPK-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SPK - SPDT with Clamp Terminal;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,781.00 268 AME-1980-106-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-SP-R-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,781.00 269 AME-1980-106-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch  Part 1980-106-R-SP-TD1  1980106RSPTD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Switch Settings 4 to 356 Degrees  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams - Circuits - Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches - Single Pole Double Throw, Snap Action, U.L. Listed Switches File E56660  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  Switch Part 1950-1-B-A-AO  TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty, Peck MI  Ships in 3 Weeks, Peck MI  Dated 10-2021  (14LBS) H 8" L 16" W 12" Box 0 $1,982.00 270 AME-1980-106-R-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-R-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for C.C.W. Rotation  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 271 AME-1980-106-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-SP-TD3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 272 AME-1980-106-R-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-106-R-SP-X  1980106RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The Micro-Adjust Cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or a N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial is to be provided  3 Year Limited Warranty  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated -1-2023  (14LBS) H 8" L 14" W 8" Box 0 $1,685.00 273 AME-1980-106-X-DP-X-R-20-L5 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-R-20-L5  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  L5 - Left end position 5;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,234.00 274 AME-1980-106-X-DP-X-R-5-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-R-5-L1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,234.00 275 AME-1980-106-X-DP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-R-5-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,234.00 276 AME-1980-106-X-DP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-R-5-R3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,234.00 277 AME-1980-106-X-DP-X-S-1-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-S-1-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 278 AME-1980-106-X-DP-X-S-1-R Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-DP-X-S-1-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch, 1950-4-B-A-A0  X = No Timing Dial  S= Straight Drive Gear Reducer  1 = 1 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 279 AME-1980-106-X-DP-X-S-2-R Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-DP-X-S-2-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  2 = 2 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 280 AME-1980-106-X-DP-X-S-4-R Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-DP-X-S-4-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  4 = 4 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 281 AME-1980-106-X-DP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-S-6-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 282 AME-1980-106-X-DP-X-S-80-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-S-80-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 283 AME-1980-106-X-SP-R-TD1-R-30-L8 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SPR-TD1-R30-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  6 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R= Right Angle Gear Reducer  30 = 30 to 1 Gear Ratio  L8 = Left End Gear Reducer Shaft Location 8  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,315.00 284 AME-1980-106-X-SP-R-TD1-R-5-L1 Ametek Gemco RCLS NEMA 1 6 CIR LH SPDT SW W/BOOT TD1 & 5:1 RAGR L1 INPUT; Product line: 1980 Model  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,315.00 285 AME-1980-106-X-SP-R-X-S-28-L Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-R-X-S-28-L  Series 1980  1 = NEMA 1 Rated Enclosure  6 = 6 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection   X = No Timing Dial or Dial Window is to be provided  S= Straight Drive Gear Reducer  28 = 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,232.00 286 AME-1980-106-X-SP-R-X-S-32-L Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-R-X-S-32-L  Series 1980  1 = NEMA 1 Rated Enclosure  6 = 6 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection   X = No Timing Dial or Dial Window is to be provided  S= Straight Drive Gear Reducer  32 = 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,232.00 287 AME-1980-106-X-SP-TD1-R-30-L8 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-TD1-R30-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  6 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R= Right Angle Gear Reducer  30 = 30 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,275.56 288 AME-1980-106-X-SP-TD2-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-TD2-S-24-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,433.00 289 AME-1980-106-X-SP-X-R-10-L8 Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-106-X-SP-X-R-10-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch, Switch Part 1950-1-B-A-AO  X = No Timing Dial   R= Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  L8 = Left End Gear Reducer Shaft Location 8  Ships in 3 Weeks, Peck MI  Dated 1-2020  (14LBS) H 8" L 18" W 12" Box 0 $2,405.16 290 AME-1980-106-X-SP-X-R-10-R2 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-X-R-10-R2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 291 AME-1980-106-X-SP-X-R-1-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-1-L8  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 292 AME-1980-106-X-SP-X-R-1-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-1-R3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 293 AME-1980-106-X-SP-X-R-2-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-2-L7  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 294 AME-1980-106-X-SP-X-R-30-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-30-R2  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 295 AME-1980-106-X-SP-X-R-3-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-3-L7  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 296 AME-1980-106-X-SP-X-R-3-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-3-R3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 297 AME-1980-106-X-SP-X-R-4.75-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-4.75-R2  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4.75 - Right Angle Gear Reducer ratio 4.75:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 298 AME-1980-106-X-SP-X-R-40-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-40-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  40 - Right Angle Gear Reducer ratio 40:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 299 AME-1980-106-X-SP-X-R-5-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-X-R-5-L7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 300 AME-1980-106-X-SP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-5-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 301 AME-1980-106-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-5-R3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 302 AME-1980-106-X-SP-X-R-6-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-6-L1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 303 AME-1980-106-X-SP-X-R-6-R4 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-X-R6-R4  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  6 = 6 to 1 Gear Ratio  R4 = Right End Gear Reducer Shaft Location 4  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,066.04 304 AME-1980-106-X-SP-X-R-80-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-80-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  80 - Right Angle Gear Reducer ratio 80:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 305 AME-1980-106-X-SP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-12-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 306 AME-1980-106-X-SP-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-14-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 307 AME-1980-106-X-SP-X-S-15-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-15-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  15 - Straight Drive Gear Reducer ratio 15:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 308 AME-1980-106-X-SP-X-S-200-R Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-X-S-200-R  Series 1980  1 = NEMA 1 Enclosure  6 = 6 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw  X = No Timing Dial  S= Straight Drive Gear Reducer  200 = 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 309 AME-1980-106-X-SP-X-S-20-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-20-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 310 AME-1980-106-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-20-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 311 AME-1980-106-X-SP-X-S-25-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-25-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  25 - Straight Drive Gear Reducer ratio 25:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 312 AME-1980-106-X-SP-X-S-35-L Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-35-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  35 = 35 to 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,217.24 313 AME-1980-106-X-SP-X-S-35-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-35-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  35 = 35 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,217.24 314 AME-1980-106-X-SP-X-S-36-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-36-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 315 AME-1980-106-X-SP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-3-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 316 AME-1980-106-X-SP-X-S-400-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-400-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 317 AME-1980-106-X-SP-X-S-40-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-40-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 318 AME-1980-106-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-4-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 319 AME-1980-106-X-SP-X-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-5-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 320 AME-1980-106-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-5-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 321 AME-1980-106-X-SP-X-S-60-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-60-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 322 AME-1980-106-X-SP-X-S-8.5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-8.5-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8.5 - Straight Drive Gear Reducer ratio 8.5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 323 AME-1980-106-X-SP-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-80-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 324 AME-1980-106-X-SP-X-S-8-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-8-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8 - Straight Drive Gear Reducer ratio 8:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 325 AME-1980-106-Y-DP-R-X-R-60-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-Y-DP-R-X-R-60-L1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  60 - Right Angle Gear Reducer ratio 60:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,417.00 326 AME-1980-106-Y-DP-R-X-R-60-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-Y-DP-R-X-R-60-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  60 - Right Angle Gear Reducer ratio 60:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,417.00 327 AME-1980-106-Y-DP-R-X-S-500-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-Y-DP-R-X-S-500-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  500 - Straight Drive Gear Reducer ratio 500:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,631.00 328 AME-1980-106-Y-SP-R-X-S-28-L Ametek Gemco RCLS NEMA 1 6 CIR DBL SPDT SWW/BOOT/28:1 SDGR ON LH SIDE; Product line: 1980 Model  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,319.00 329 AME-1980-107-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-107-D-DP-X  Series 1980  1 = NEMA 1 Enclosure  07 = 7 Independent Cams / Circuits / Switches  D = Dual Shaft Extensions, Left and Right Extensions from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switches U.L. Listed  X = No Timing Dial or Dial Window is provided  3 Year Warranty (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,349.00 330 AME-1980-107-D-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-D-SP-R-X  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,097.00 331 AME-1980-107-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-D-SP-TD1  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,282.00 332 AME-1980-107-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-D-SP-X  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,985.00 333 AME-1980-107-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-L-DP-X  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,262.00 334 AME-1980-107-L-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-L-SP-TD2  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,195.00 335 AME-1980-107-L-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-L-SP-TD3  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,195.00 336 AME-1980-107-L-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-107-L-SP-X  Series 1980  1 = NEMA 1 Enclosure  7 = 7 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  X = No Timing Dial or Dial Window is provided  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,898.00 337 AME-1980-107-R-DP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-R-DP-TD4  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,559.00 338 AME-1980-107-R-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-107-R-DP-X  Series 1980  1 = NEMA 1 Enclosure  07 = 7 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switches U.L. Listed  X = No Timing Dial or Dial Window is provided  3 Year Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,262.00 339 AME-1980-107-R-SP-R-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-107-R-SP-R-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture & dust   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,307.00 340 AME-1980-107-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-107-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  07 = 7 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial Labeled for C.W. Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,195.00 341 AME-1980-107-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-R-SP-TD2  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,195.00 342 AME-1980-107-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-107-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (16LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,898.00 343 AME-1980-107-X-DP-TD1-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-DP-TD1-S-6-R  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,010.00 344 AME-1980-107-X-SP-R-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-SP-R-X-S-6-R  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,461.00 345 AME-1980-107-X-SP-TD1-R-36-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-SP-TD1-R-36-R1  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  36 - Right Angle Gear Reducer ratio 36:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,432.00 346 AME-1980-107-X-SP-X-R-48-L2 Ametek Gemco Rotating Cam Limit Switch Model 1980-107-X-SP-X-R48-L2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Sheet Metal Enclosure  07 = 7 Independent Circuits / Cams / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  48 = 48 to 1 Gear Ratio  L2 = Left End, Shaft Position 2 (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,217.24 347 AME-1980-107-X-SP-X-R-7-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-SP-X-R-7-R1  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,135.00 348 AME-1980-107-X-SP-X-S-24-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-SP-X-S-24-L  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,349.00 349 AME-1980-107-X-SP-X-S-6-R Ametek Gemco Rotating Cam Limit Switch Model 1980-107-X-SP-X-S-6-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  07 = 7 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  6 = 6 to 1 Gear Ratio  R = Right End Gear Reducer  (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $3,349.00 350 AME-1980-108-D-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-D-DP-TD1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,921.00 351 AME-1980-108-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-D-DP-X  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,624.00 352 AME-1980-108-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-D-SP-TD1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,505.00 353 AME-1980-108-D-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-D-SP-TD4  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,505.00 354 AME-1980-108-D-SP-TW1 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-D-SP-TW1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  8 = 8 Independent Cams / Circuits / Switches   D = Double Shaft Extension, shafts exit from both ends of the enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TW1 = Timing Dial & Dial Window is to be provided Timing Dial Degrees Labeled for Clock Wise Rotation   3 Year Warranty  Dimensions, use a 9 to 12 circuit enclosure drawing   (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,769.04 355 AME-1980-108-D-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-108-D-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  8 = 8 Independent Cams / Circuits / Switches   D = Double Shaft Extension, shafts exit from both ends of the enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  (17LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,208.00 356 AME-1980-108-L-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-L-DP-TD2  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,834.00 357 AME-1980-108-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-L-DP-X  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,537.00 358 AME-1980-108-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-L-SP-TD1  Series 1980  1 = NEMA 1 Enclosure  08 = 8 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw Snap Action Switches U.L. Listed  TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 359 AME-1980-108-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-L-SP-TD2  Series 1980  1 = NEMA 1 Enclosure  8 = 8 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD2 = Timing Dial C.C.W. Counter Clock Wise Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 360 AME-1980-108-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-108-L-SP-X  1080108LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and  mounted inside the enclosure or by hand  1 = NEMA 1 Enclosure, Sheet Metal Cover  08 = 8 Independent Cams - Circuits - Switches   L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches - Single Pole Double Throw  Snap Action, U.L. Listed Switches  Can be wired for Normally Open or a Normally Closed Circuits  4 Screw Terminals per switch  UL Listed Assembly File E56660  X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 3 Weeks, Peck MI  Dated 10-2021  (14LBS) H 8" L 18" W 12" Box 0 $2,121.00 361 AME-1980-108-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-R-DP-R-X  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,665.00 362 AME-1980-108-R-DP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-108-R-DP-X  1980108RDPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied  and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  8 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty, FOB Peck MI  Ships in 4 Weeks, Peck MI  Dated 01-2023  (12LBS) H 8" L 12" W 10" Box 0 $2,537.00 363 AME-1980-108-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-R-SP-R-X  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,249.00 364 AME-1980-108-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 =   3 Year Limited Warranty  (20LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 365 AME-1980-108-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-R-SP-TD2  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 366 AME-1980-108-R-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-R-SP-TD4  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 367 AME-1980-108-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-108-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   The Micro-Adjust Cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Precision Snap Action  Gemco Mfg., UL Listed Switches Assembly File E56660   Which can be wired for either a N.O or a N.C. Circuit  4 screw terminals per switch  Switch Settings 4 to 356 Degrees   X = No other options  3 Year Limited Warranty  [Amazon] Dated 1/17  (17LBS) H 6" L 16" W 8" Box  [1/2018]  [1/2018] 2 $2,121.00 368 AME-1980-108-X-DP-R-X-S-8-R Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-DP-R-X-S-8-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 08 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  R = Rubber Boot on switch plunger for moisture & dust protection   X = No Timing Dial  S= Straight Drive Gear Reducer  8 = 8 to 1 Gear Ratio  R = Right End Shaft Location  (21LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,116.00 369 AME-1980-108-X-DP-X-R-3-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-R-3-R1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,774.00 370 AME-1980-108-X-DP-X-R-6-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-R-6-R1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,774.00 371 AME-1980-108-X-DP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-S-3-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,988.00 372 AME-1980-108-X-DP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-S-4-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,988.00 373 AME-1980-108-X-DP-X-S-5-R Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-DP-X-S-5-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 8 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  5 = 5 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,826.36 374 AME-1980-108-X-DP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-S-6-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,988.00 375 AME-1980-108-X-DP-X-S-8-R Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-DP-X-S-8-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 08 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  8 = 8 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,826.36 376 AME-1980-108-X-SP-TD1-S-18-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-TD1-S-18-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  18 - Straight Drive Gear Reducer ratio 18:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,869.00 377 AME-1980-108-X-SP-X-R-10-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-X-R-10-L1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,358.00 378 AME-1980-108-X-SP-X-R-18-L6 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-SP-X-R18-L6  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  18 = 18 to 1 Gear Ratio  L6 = Left End Gear Reducer Shaft Location 6  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,372.76 379 AME-1980-108-X-SP-X-R-40-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-SP-X-R40-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  40 = 40 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,372.76 380 AME-1980-108-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-X-R-5-L7  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,358.00 381 AME-1980-108-X-SP-X-R-5-R3 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-SP-X-R5-R3  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  8 = 8 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial is to be provided   R = Right Angle Drive Gear Reducer  5 = 5 to 1 Gear Ratio  R3 = Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,372.76 382 AME-1980-108-X-SP-X-S-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-X-S-2-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,572.00 383 AME-1980-108-X-SP-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-X-S-80-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,572.00 384 AME-1980-108-Y-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-Y-SP-X-S-1-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,659.00 385 AME-1980-108-Y-SP-X-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-Y-SP-X-S-5-L  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,659.00 386 AME-1980-108-Y-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-Y-SP-X-S-5-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,659.00 387 AME-1980-109-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-D-DP-X  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,340.00 388 AME-1980-109-D-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-109-D-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extensions from each end of the Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (21LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,872.00 389 AME-1980-109-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-L-DP-X  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,253.00 390 AME-1980-109-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-L-SP-X  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,785.00 391 AME-1980-109-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-R-DP-X  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,253.00 392 AME-1980-109-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-R-SP-TD1  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,082.00 393 AME-1980-109-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-109-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (21LBS)  (14LBS) H 8.00" L 18.00" W 12.00"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 9 $2,785.00 394 AME-1980-109-X-DP-X-R-14-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-109-X-DP-X-R-14-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  14 = 14 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,180.60 395 AME-1980-109-X-SP-TD1-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-X-SP-TD1-S-1-R  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,533.00 396 AME-1980-110-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-D-DP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,704.00 397 AME-1980-110-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-110-D-SP-TD1  Series 1980  1 = NEMA 1 Enclosure  10 = 10 Cams / Circuits / Switches  D = Double Shaft Extension (2) from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial Labeled for C.W. Rotation  (21LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,481.00 398 AME-1980-110-D-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-D-SP-TD2  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,481.00 399 AME-1980-110-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-D-SP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,184.00 400 AME-1980-110-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-L-DP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,617.00 401 AME-1980-110-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-L-SP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,097.00 402 AME-1980-110-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-R-DP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,617.00 403 AME-1980-110-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-110-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  10 = 10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,394.00 404 AME-1980-110-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-R-SP-TD3  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,394.00 405 AME-1980-110-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-110-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  10 = 10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O or a N.C.Circuit  4 Screw Terminals per switch  Switch Settings 4 to 356 Degrees   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  [Amazon] Dated 1/17  (21LBS) H 8" L 18" W 12" Box  [1/2018]  [1/2018] 0 $3,097.00 406 AME-1980-110-X-SP-X-M-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-X-SP-X-M-5-R  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  5 - Gear Multiplier ratio 1:5  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,548.00 407 AME-1980-110-X-SP-X-R-100-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-X-SP-X-R-100-R1  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,334.00 408 AME-1980-110-X-SP-X-R-40-L6 Ametek Gemco Rotating Cam Limit Switch Model 1980-110-X-SP-X-R-40-L6  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  10 = 10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  40 = 40 to 1 Gear Ratio  L6 = Left End Gear Reducer Shaft Location 6  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,334.00 409 AME-1980-110-X-SP-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-X-SP-X-S-14-L  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,548.00 410 AME-1980-111-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-D-DP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,069.00 411 AME-1980-111-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-D-SP-TD1  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,794.00 412 AME-1980-111-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-D-SP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,497.00 413 AME-1980-111-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-L-DP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,982.00 414 AME-1980-111-L-SP-TD3 Ametek Gemco Rotating Cam Limit Switch Model 1980-111-L-SP-TD3  Series 1980  1 = NEMA 1 Enclosure  11 = 11 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD3 = Timing Dial Labeled Vertically  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,617.92 415 AME-1980-111-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-L-SP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,410.00 416 AME-1980-111-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-R-DP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,982.00 417 AME-1980-111-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-111-R-SP-TD1  Series 1980  1 = NEMA 1 Enclosure  11= 11 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial Labeled for C.W. Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,707.00 418 AME-1980-111-R-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-111-R-SP-TD2  Series 1980  1 = NEMA 1 Enclosure  11= 11 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD2 = Timing Dial Labeled for C.C.W. Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,707.00 419 AME-1980-111-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-111-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Steel Fabricated Enclosure  11 = 11 Independent Circuits / Cams / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,410.00 420 AME-1980-111-X-SP-TD2-R-30-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-X-SP-TD2-R-30-R1  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,944.00 421 AME-1980-112-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,436.00 422 AME-1980-112-D-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-SP-TD4  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,109.00 423 AME-1980-112-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-SP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,812.00 424 AME-1980-112-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-L-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,349.00 425 AME-1980-112-L-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-112-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,725.00 426 AME-1980-112-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-R-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,349.00 427 AME-1980-112-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (29LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,022.00 428 AME-1980-112-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-R-SP-TD2  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,022.00 429 AME-1980-112-R-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-112-R-SP-X  1980112RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuits.  4 screw terminals per switch  X = No other options  3 Year Limited Warranty  Ships in 2 to 3 Weeks, Peck MI  Dated 01-2024 0 $3,725.00 430 AME-1980-112-X-DP-X-R-6-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-DP-X-R-6-R8  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,586.00 431 AME-1980-112-X-SP-R-X-R-1.5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-R-X-R-1.5-R1  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1.5 - Right Angle Gear Reducer ratio 1.5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,154.00 432 AME-1980-112-X-SP-R-X-S-6-R Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-R-X-S-6-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  R = Rubber Boot / Seal on the Switch Plunger for additional moisture or dust protection   X = No Timing Dial  S= Straight Drive Gear Reducer  6 = 6 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,368.00 433 AME-1980-112-X-SP-X-R-10-R4 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R10-R4  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure, Dust Tight  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  R4 = Right End Gear Reducer Shaft Location 4  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,506.76 434 AME-1980-112-X-SP-X-R-1-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-1-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial is to be provided  R= right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  L1 = Left End Shaft Location, Position 1  (36LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,506.76 435 AME-1980-112-X-SP-X-R-5-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-5-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial is to be provided  R= right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L1 = Left End Shaft Location, Position 1  (36LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,506.76 436 AME-1980-112-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-R-5-L7  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,962.00 437 AME-1980-112-X-SP-X-R-5-R7 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-5-R7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure, Dust Tight  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R7 = Right End Gear Reducer Shaft Location 7 / Top of Gear Box / Left Side End View  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $4,962.00 438 AME-1980-112-X-SP-X-R-7-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-R-7-L7  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,962.00 439 AME-1980-112-X-SP-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-14-L  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 440 AME-1980-112-X-SP-X-S-4-R Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-S-4-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  4 = 4 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 441 AME-1980-112-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-5-R  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 442 AME-1980-112-X-SP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-6-R  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 443 AME-1980-112-X-SP-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-80-R  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 444 AME-1980-112-X-SP-X-S-8-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-8-R  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8 - Straight Drive Gear Reducer ratio 8:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 445 AME-1980-112-Y-DP-X-S-10-L Ametek Gemco Rotating Cam Limit Switch Model 1980-112-Y-DP-X-S-10-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches  Y = Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  10 = 10 to 1 Gear Ratio  L = Left End Gear Reducer  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,173.11 446 AME-1980-113-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-D-DP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,030.00 447 AME-1980-113-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-D-SP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,354.00 448 AME-1980-113-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-L-DP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,943.00 449 AME-1980-113-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-L-SP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,267.00 450 AME-1980-113-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-R-DP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,943.00 451 AME-1980-113-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-R-SP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,267.00 452 AME-1980-114-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-D-DP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,268.00 453 AME-1980-114-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-D-SP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,540.00 454 AME-1980-114-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-L-DP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,181.00 455 AME-1980-114-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-L-SP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,453.00 456 AME-1980-114-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-R-DP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,181.00 457 AME-1980-114-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-R-SP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,453.00 458 AME-1980-114-X-DP-X-R-5-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-X-DP-X-R-5-R8  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,418.00 459 AME-1980-114-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-X-SP-X-R-5-L7  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,690.00 460 AME-1980-114-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-X-SP-X-S-4-R  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,904.00 461 AME-1980-115-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-D-DP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,503.00 462 AME-1980-115-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch  Model 1980-115-D-SP-X  115 = NEMA 1, 15 Circuit  D = Double Ended  SP - S.P.D.T. Switches  X = Not other options  Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $4,723.00 463 AME-1980-115-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-L-DP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,416.00 464 AME-1980-115-L-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-L-SP-TD4  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,933.00 465 AME-1980-115-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-L-SP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,636.00 466 AME-1980-115-R-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-115-R-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Sheet Metal Enclosure   15 = 15 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch   TD1 = Timing Dial with Counter Clock Wise Labeled Dials  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,052.15 467 AME-1980-115-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-R-DP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,416.00 468 AME-1980-115-R-DP-X-R-6-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-R-DP-X-R-6-R8  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,717.43 469 AME-1980-115-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-R-SP-TD1  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,933.00 470 AME-1980-115-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-R-SP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,636.00 471 AME-1980-115-X-DP-X-R-5-R8 Ametek Gemco Rotating Cam Limit Switch Model 1980-115-X-DP-X-R-5-R8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Dust Tight  15 = 15 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R8 = Right End Gear Reducer Shaft Location 8 / Top of Gear Box Right Side / Right Side End View  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,717.43 472 AME-1980-115-X-DP-X-R-6-R8 Ametek Gemco Rotating Cam Limit Switch Model 1980-115-X-DP-X-R6-R8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  15 = 15 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  6 = 6 to 1 Gear Ratio  R8 = Right End Gear Reducer Shaft Location 8 (33LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,653.00 473 AME-1980-115-X-SP-TD1-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-X-SP-TD1-S-30-R  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  30 - Straight Drive Gear Reducer ratio 30:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,384.00 474 AME-1980-115-X-SP-TD1-S-50-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-X-SP-TD1-S-50-R  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  50 - Straight Drive Gear Reducer ratio 50:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,384.00 475 AME-1980-116-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-D-DP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,747.00 476 AME-1980-116-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-D-SP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,915.00 477 AME-1980-116-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-L-DP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,660.00 478 AME-1980-116-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-L-SP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,828.00 479 AME-1980-116-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-R-DP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,660.00 480 AME-1980-116-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-116-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  16 = 16 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (30LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,828.00 481 AME-1980-116-X-DP-X-R-6-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-X-DP-X-R-6-R8  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,897.00 482 AME-1980-117-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-D-DP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,338.00 483 AME-1980-117-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-D-SP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,454.00 484 AME-1980-117-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-L-DP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,251.00 485 AME-1980-117-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-L-SP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,367.00 486 AME-1980-117-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-R-DP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,251.00 487 AME-1980-117-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-R-SP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,367.00 488 AME-1980-118-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-D-DP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,578.00 489 AME-1980-118-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-D-SP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,642.00 490 AME-1980-118-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-L-DP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,491.00 491 AME-1980-118-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-118-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  018 = 18 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,852.00 492 AME-1980-118-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-L-SP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,555.00 493 AME-1980-118-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-R-DP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,491.00 494 AME-1980-118-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-118-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  018 = 18 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,852.00 495 AME-1980-118-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-R-SP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,555.00 496 AME-1980-118-X-SP-TD1-S-1.5-L Ametek Gemco Rotating Cam Limit Switch Model 1980-118-X-SP-TD1-S-1.5-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  018 = 18 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  S = Straight Drive Gear Reducer  1.5 = 1 & 1/2 to 1 Gear Ratio  L = Gear Reducer & Shaft Extension on Left End  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $5,159.15 497 AME-1980-118-X-SP-TD1-S-1.5-R Ametek Gemco Rotating Cam Limit Switch Model 1980-118-X-SP-TD1-S-1.5-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  018 = 18 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  S = Straight Drive Gear Reducer  1.5 = 1 & 1/2 to 1 Gear Ratio  R = Gear Reducer & Shaft Extension on Right End  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $5,159.15 498 AME-1980-119-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-D-DP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,823.00 499 AME-1980-119-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-D-SP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,835.00 500 AME-1980-119-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-L-DP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,736.00 501 AME-1980-119-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-L-SP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,748.00 502 AME-1980-119-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-R-DP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,736.00 503 AME-1980-119-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-R-SP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,748.00 504 AME-1980-1201-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-D-DP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,432.00 505 AME-1980-1201-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-D-SP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,380.00 506 AME-1980-1201-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-L-DP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,345.00 507 AME-1980-1201-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-L-SP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,293.00 508 AME-1980-1201-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-R-DP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,345.00 509 AME-1980-1201-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-R-SP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,293.00 510 AME-1980-1201-X-SP-X-S-14-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-X-SP-X-S-14-R  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,744.00 511 AME-1980-1201-X-SP-X-S-35-R Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1201-X-SP-X-S-10-R  19801201XSPXS10R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  12 = NEMA 12 Enclosure, Dust Tight  01 = 1 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuit.  4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  10 = 10 to 1 Gear Ratio  R = Right End Shaft Location  Ships in 6 Weeks, Peck MI  Dated 01-2023  (14LBS) H 8" L 18" W 12" Box 0 $2,589.00 512 AME-1980-1202-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-D-DP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,591.00 513 AME-1980-1202-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-D-SP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,487.00 514 AME-1980-1202-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-L-DP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,504.00 515 AME-1980-1202-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-L-SP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,400.00 516 AME-1980-1202-R-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1202-R-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasket Cover, Dust Resistant   2 = 2 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,274.40 517 AME-1980-1202-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-R-DP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,504.00 518 AME-1980-1202-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1202-R-SP-TD1  Series 1980  12 = NEMA 12 Enclosure  02 = 2 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial C.W. Clock Wise Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,697.00 519 AME-1980-1202-R-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1202-R-SP-X  aka 19801202RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch, Switch Part 1950-1-B-A-AO, U.L. Listed Switches  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No other options  3 Year Limited Warranty  Ships in 10 Days, Peck MI  Dated 1-2020  (14LBS) H 8" L 18" W 12" Box 0 $1,400.00 520 AME-1980-1202-X-DP-X-R-60-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-DP-X-R-60-R1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  60 - Right Angle Gear Reducer ratio 60:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,741.00 521 AME-1980-1202-X-DP-X-S-2-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-DP-X-S-2-L  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,955.00 522 AME-1980-1202-X-SP-R-X-R-50-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-SP-R-X-R-50-R1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  50 - Right Angle Gear Reducer ratio 50:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,669.00 523 AME-1980-1202-X-SP-X-R-3-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-SP-X-R-3-L1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,637.00 524 AME-1980-1202-X-SP-X-R-4-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1202-X-SP-X-R4-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed Dust Tight  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  4 = 4 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,637.00 525 AME-1980-1202-X-SP-X-R-4-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-SP-X-R-4-R2  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,637.00 526 AME-1980-1202-X-SP-X-R-5-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1202-X-SP-X-R5-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed Dust Tight  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,637.00 527 AME-1980-1202-X-SP-X-S-30-R Ametek Gemco Rotating Cam Limit Switch  Model 1980-1202-X-SP-X-S-30-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  12 = NEMA 12 Enclosure, Dust Tight  02 = 2 Independent Cams / Circuits / Switches   Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuits  4 Screw Terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  30 = 30 to 1 Gear Ratio  R = Right End Shaft Location  [Updated 1-19]  (14LBS) H 8" L 18" W 12" Box 0 $2,851.00 528 AME-1980-1202-Y-DP-X-R-100-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-Y-DP-X-R-100-L1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,828.00 529 AME-1980-1202-Y-DP-X-R-100-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-Y-DP-X-R-100-R1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,828.00 530 AME-1980-1202-Y-DP-X-S-100-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-Y-DP-X-S-100-L  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  100 - Straight Drive Gear Reducer ratio 100:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,042.00 531 AME-1980-1202-Y-DP-X-S-200-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-Y-DP-X-S-200-R  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  200 - Straight Drive Gear Reducer ratio 200:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,042.00 532 AME-1980-1203-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-DP-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,748.00 533 AME-1980-1203-D-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-SP-R-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,640.00 534 AME-1980-1203-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-SP-TD1  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,889.00 535 AME-1980-1203-D-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-SP-TD3  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,889.00 536 AME-1980-1203-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-SP-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,592.00 537 AME-1980-1203-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-L-DP-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,661.00 538 AME-1980-1203-L-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-L-SP-TD1  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,802.00 539 AME-1980-1203-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-1203-L-SP-X  aka 19801203LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Enclosure, Dust Tight, Gasketed Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per Switch, Switch Part 1950-1-B-A-A-0   Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  3 Year Limited Warranty  Ships in 10 Days  Dated 1-2020  (14LBS) H 8" L 16" W 12" Box 1 $1,505.00 540 AME-1980-1203-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-R-DP-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,661.00 541 AME-1980-1203-R-SP-R-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1203-R-SP-R-TD1  Series 1980  12 = NEMA 12 Enclosure  03= 3 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw Snap Action Switches  R = Rubber Boot on Switch Plunger   TD1 = Timing Dial Clock Wise Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,850.00 542 AME-1980-1203-R-SP-R-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1203-R-SP-R-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  03 = Qty. 3, Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,177.20 543 AME-1980-1203-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch  Model 1980-1203-R-SP-TD1  Series 1980  12 = NEMA 12 Enclosure  03 = 3 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial C.W., Labeled for Clock Wise Rotation  [Amazon] Dated 1/17  (14LBS) H 8" L 18" W 12" Box  [1/2018]  [1/2018] 0 $1,802.00 544 AME-1980-1203-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-R-SP-TD2  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,802.00 545 AME-1980-1203-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-1203-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  03 = Qty. 3, Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  3 Year Limited Warranty, Peck MI  [Update 1/18]  (14LBS) H 8" L 14" W 8" Box 1 $1,505.00 546 AME-1980-1203-X-DP-R-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-DP-R-X-S-12-R  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,160.00 547 AME-1980-1203-X-DP-X-R-2-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-DP-X-R-2-R4  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,898.00 548 AME-1980-1203-X-DP-X-R-3-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-DP-X-R-3-R4  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,898.00 549 AME-1980-1203-X-SP-X-M-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-M-5-R  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  5 - Gear Multiplier ratio 1:5  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 550 AME-1980-1203-X-SP-X-R-10-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-R-10-R4  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,742.00 551 AME-1980-1203-X-SP-X-R-17-R1 Ametek Gemco Rotating Cam Limit Switch  Model 1980-1203-X-SP-X-R17-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  3 = 3 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  17 = 17 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  Dated 1/18  (14LBS) H 8" L 18" W 12" Box 1 $2,742.00 552 AME-1980-1203-X-SP-X-R-25-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-R-25-R4  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  25 - Right Angle Gear Reducer ratio 25:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,742.00 553 AME-1980-1203-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-R-5-R3  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,742.00 554 AME-1980-1203-X-SP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-R-8-R1  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,742.00 555 AME-1980-1203-X-SP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-3-R  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 556 AME-1980-1203-X-SP-X-S-60-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-60-L  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 557 AME-1980-1203-X-SP-X-S-60-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-60-R  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 558 AME-1980-1203-X-SP-X-S-64-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-64-L  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  64 - Straight Drive Gear Reducer ratio 64:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 559 AME-1980-1203-X-SP-X-S-80-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-80-L  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 560 AME-1980-1204-D-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-D-DP-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,247.00 561 AME-1980-1204-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-D-DP-X  Series 1980  12 = NEMA 12 Enclosure  4 = 4 Cams / Circuits / Switches  D = Double Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw  X = No Timing Dial or Dial Window is provided  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,950.00 562 AME-1980-1204-D-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-D-SP-R-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,103.00 563 AME-1980-1204-D-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-D-SP-R-X  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,806.00 564 AME-1980-1204-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  04 = 4 Independent Cams / Circuits / Switches  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure   D = Dual (2) Shaft Extensions from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD1 = Timing Dial C.W. Clock Wise Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,438.56 565 AME-1980-1204-D-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-D-SP-TD3  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,039.00 566 AME-1980-1204-D-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1204-D-SP-X  19801204DSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure. Dust Tight  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Double, 2 Shaft Extensions from the enclosure, @ each end  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty   Ships in 3 Weeks, Peck MI  Dated 01-2024  (14LBS) H 8" L 18" W 12" Box 0 $1,742.00 567 AME-1980-1204-L-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-DP-R-X  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,927.00 568 AME-1980-1204-L-DP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-L-DP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Dust Tight  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter Clock Wise Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,160.00 569 AME-1980-1204-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-L-DP-X  Series 1980  12 = NEMA 12 Enclosure  4 = 4 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw  X = No Timing Dial or Dial Window is provided  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,863.00 570 AME-1980-1204-L-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-R-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,016.00 571 AME-1980-1204-L-SP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-R-TD2  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,016.00 572 AME-1980-1204-L-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-R-X  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,719.00 573 AME-1980-1204-L-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 574 AME-1980-1204-L-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-TD3  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 575 AME-1980-1204-L-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-1204-L-SP-X  19801204LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   L = Left Hand Shaft Extension from Enclosure   SP = S.P.D.T. Switches - Single Pole Double Throw, Snap Action  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  Switch Part 1950-1-B-A-AO  X = No other options  3 Year Limited Warranty  Ships from Stock to 4 Weeks  Dated 01-2023  (19LBS) H 8" L 18" W 12" Box 0 $1,655.00 576 AME-1980-1204-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-DP-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,160.00 577 AME-1980-1204-R-DP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-1204-R-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Enclosure, Dust Tight / Gasketed  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  8 screw terminals per switch, switch Part 1950-1-B-A-AO  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $1,863.00 578 AME-1980-1204-R-SP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-SP-R-TD2  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,016.00 579 AME-1980-1204-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-SP-R-X  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,719.00 580 AME-1980-1204-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Dust Tight  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 581 AME-1980-1204-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-SP-TD2  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 582 AME-1980-1204-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-SP-TD3  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 583 AME-1980-1204-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-1204-R-SP-X  aka 19801204RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Switch can be wired for either a N.O or N.C. Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No other options  3 Year Limited Warranty, Peck MI  Normally a Stock Item @ BPI  Ships from Stock to 4 Weeks  Dated 06-2022  (14LBS) H 8" L 18" W 12" Box 3 $1,655.00 584 AME-1980-1204-X-DP-R-X-R-20-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-R-X-R-20-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,164.00 585 AME-1980-1204-X-DP-R-X-S-100-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-R-X-S-100-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  100 - Straight Drive Gear Reducer ratio 100:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,378.00 586 AME-1980-1204-X-DP-R-X-S-40-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-R-X-S-40-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,378.00 587 AME-1980-1204-X-DP-X-R-1.5-R3 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1204-X-DP-X-R-1.5-R3  19801204XDPXR1.5R3  NEMA 12 Enclosure  4 Circuit  X - No Shaft Extension Opposite Gear Box  Switch:  DP - Double Pole, Double Throw  X - None  Gear Reducer  R - Right Angle  1.5 - Right Angle Gear Reducer ratio 1.5:1  R3 - Right End, Position 3  Ships in 6 Weeks, Peck MI  Dated 06-2022  (14LBS) H 8" L 18" W 12" Box 0 $3,100.00 588 AME-1980-1204-X-DP-X-R-12-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-R-12-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  12 - Right Angle Gear Reducer ratio 12:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,100.00 589 AME-1980-1204-X-DP-X-R-18-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-R-18-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  18 - Right Angle Gear Reducer ratio 18:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,100.00 590 AME-1980-1204-X-DP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-S-12-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,314.00 591 AME-1980-1204-X-DP-X-S-150-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-S-150-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  150 - Straight Drive Gear Reducer ratio 150:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,314.00 592 AME-1980-1204-X-DP-X-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-S-24-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,314.00 593 AME-1980-1204-X-DP-X-S-80-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-DP-X-S-80-R  Series 1980   12 = NEMA 12 Enclosure  4 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches, Double Pole Double Throw  X = No Timing Dial  S = Straight Drive Gear Reducer  80 = 80 to 1 Gear Ratio  R = Right End Shaft Location  (24LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,314.00 594 AME-1980-1204-X-SP-R-X-R-10-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SPR-X-R-10-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dust Tight  04 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  R = Right Angle Drive Gear Reducer  10 = 10 to 1 Gear Ratio  L1 = Shaft Location, Left End, Shaft Position 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 595 AME-1980-1204-X-SP-R-X-R-14-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-R-14-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  14 - Right Angle Gear Reducer ratio 14:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 596 AME-1980-1204-X-SP-R-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-10-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 597 AME-1980-1204-X-SP-R-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-1-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 598 AME-1980-1204-X-SP-R-X-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-24-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 599 AME-1980-1204-X-SP-R-X-S-400-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-400-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 9 $3,170.00 600 AME-1980-1204-X-SP-R-X-S-8-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-8-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8 - Straight Drive Gear Reducer ratio 8:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 601 AME-1980-1204-X-SP-TD1-R-100-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-R-100-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,189.00 602 AME-1980-1204-X-SP-TD1-R-10-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-R-10-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,189.00 603 AME-1980-1204-X-SP-TD1-R-8-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-R-8-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,189.00 604 AME-1980-1204-X-SP-TD1-S-16-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-S-16-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  16 - Straight Drive Gear Reducer ratio 16:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,403.00 605 AME-1980-1204-X-SP-TD1-S-600-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-S-600-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  600 - Straight Drive Gear Reducer ratio 600:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,403.00 606 AME-1980-1204-X-SP-TD1-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-S-6-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,403.00 607 AME-1980-1204-X-SP-X-R-1.25-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-1.25-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1.25 - Right Angle Gear Reducer ratio 1.25:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 608 AME-1980-1204-X-SP-X-R-100-R7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-100-R7  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  R7 - Right end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 609 AME-1980-1204-X-SP-X-R-10-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-10-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 610 AME-1980-1204-X-SP-X-R-10-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-10-R2  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 611 AME-1980-1204-X-SP-X-R-10-R5 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-10-R5  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R5 - Right end position 5;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 612 AME-1980-1204-X-SP-X-R-15-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-15-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  15 - Right Angle Gear Reducer ratio 15:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 613 AME-1980-1204-X-SP-X-R-20-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-20-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 614 AME-1980-1204-X-SP-X-R-24-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-24-L8  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  24 - Right Angle Gear Reducer ratio 24:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 615 AME-1980-1204-X-SP-X-R-25-R6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-25-R6  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  25 - Right Angle Gear Reducer ratio 25:1  Shaft Location:  R6 - Right end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 616 AME-1980-1204-X-SP-X-R-36-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-R-36-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  4 = 4Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  36 = 36 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,042.28 617 AME-1980-1204-X-SP-X-R-4-L6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-4-L6  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  L6 - Left end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 618 AME-1980-1204-X-SP-X-R-4-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-4-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 619 AME-1980-1204-X-SP-X-R-4-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-4-R4  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 620 AME-1980-1204-X-SP-X-R-50-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-50-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  50 - Right Angle Gear Reducer ratio 50:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 621 AME-1980-1204-X-SP-X-R-5-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-R-5-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Watertight  04 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  R = Right Angle Drive Gear Reducer  5 = 5 to 1 Gear Ratio  L1 = Shaft Location, Left End, Shaft Position 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 622 AME-1980-1204-X-SP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-5-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 623 AME-1980-1204-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-5-R3  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 624 AME-1980-1204-X-SP-X-R-5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-5-R4  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]