Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
  BRAKE PRODUCTS
48,048 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,354 part numbers: Motion Control Products
 
  GLEASON
17,991 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,205 part numbers: Cable & Hose Management Systems
 
 
 
 
 
  CUTLER-HAMMER
916 part numbers: Electrical Control Products
  HUBBELL
8,396 part numbers: Electrical Control Products
  SUPERBOLT
122 part numbers: Fastening Solutions
  RENOLD
406 part numbers: Mechanical Power Transmission Products
 
AUTOMATIC QUANTITY DISCOUNTS
 
BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.
 
Quotation is valid for 30 days and can be immediately converted into an order.

 
 
CREDIT TERMS CHANGES
 
  1. Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold.
  2. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Gemco Industrial Brakes
 
Magnetic Brakes - Magnetic DC Shoe Brakes (TM Style)
 
DESCRIPTION
 
The magnetic DC shoe brakes are spring set and electrically released. The brake is set when 230 VDC power is removed from the brakes coil(s). The type TM brakes electrical mechanism consists of one or two DC magnets. As power is introduced to the coils it creates an electro-magnetic field that brings the coils together to release the brake. Cutting power to the coils allows the spring to extend back to its normal state and sets the brake. Shunt or series coils are available and rated for continuous or intermittent duty ratings. We also offer single point adjustment on brakes 8 inches in wheel diameter or larger. This speeds up the brake installation and shoe lining wear adjustment by a single point adjusting feature. Brake wheel diameters of 4 1/2" to 30" are available, and are AISE rated. Rectifiers are available for AC operation.
 
Gemco Industrial Brakes stop virtually any type of industrial machine. Applications such as steel mills, indoor and outdoor bridge cranes, gantries, heavy-duty cranes, high-duty cycle cranes, lock and dam projects, stacker reclaimers, and commercial laundry equipment are just some of the uses for Gemco Industrial Brakes. These field proven high performance brake systems were originally designed and built by Westinghouse and Wagner Industrial Brakes. They are tough, reliable and provide extended, trouble free service. That's because they are designed and built to exacting specifications. For more than 40 years, Gemco has been an acknowledged leader in brake system technology for heavy-duty industrial applications.
 
Documentation Download:
Industrial Brake Brochure
Industrial Brake Systems Application Guide
Models CB and TM Magnetic Shoe Brakes Manual
 
CAD Drawings Download
    • TM43 (PDF)
    • TM63 (PDF)
    • TM83 (PDF)
    • TM83 (ZIP, DWG)
    • TM1035 (PDF)
    • TM1355 (PDF)
    • TM1655 (PDF)
    • TM1985 (PDF)
    • TM2311 (PDF)
    • TMSC8 (PDF)
    • TMSC10 (PDF)
    • TMSC13 (PDF)
    • TMSC16 (PDF)
    • TMSCH10 (PDF)
 
GEMCO TM AIST DC Brakes
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-TM-1035 Ametek Gemco DC Brake 10 " 
Part TM-1035 
TM1035 
Heavy Duty AIST Spring Set Magnetically Released Brake Assembly 
Direct Current Clapper Type 
10 Inch Wheel Diameter 
Voltage DC with Shunt or Series Wound Coils 
With Series Coils 200 FT. LBS., 1/2 Hour & 130 FT LBS 1 Hour 
With Shunt Coils 200 FT. LBS., 1 Hour & 150 FT LBS 8 Hours 
A 10 X 3.75 Inch Brake Wheel is not included 
A Rectifier for AC Voltages is available at additional cost 
Motor Freight Only 
Normally a Stock Item with a Shunt Wound Coil 
Normally a Stock Item @ BPI  
Ships from Stock to 8 Weeks 
Dated 01-2024 
(165LBS)
- 0 $8,955.00
2 AME-TM-1355 Ametek Gemco DC Brake 13 Inch 
Part TM-1355 
TM1355 
Heavy Duty 13 Inch DC Magnetic Brake Assembly 
Manufactured to AIST Specifications 
Direct Current Clapper Type 
13 Inch Wheel Diameter 
Voltage DC 
With Shunt or Series Wound Coils 
Shunt Coils 550 FT. LBS. 1 Hour & 400 Ft Lbs 8 Hours 
Series Coils 550 FT. LBS. 1/2 Hour & 365 FT Lbs. 1 Hour 
Options available at additional cost Include: 
13 Inch Brake Wheel with a Pilot or Finished Bore & Keyway 
Secondary Operation via a Hydraulic Slave Cylinder 
For progressive brake application from a crane cab 
A Rectifier for AC to DC Conversion - Operation 
Manual Hand Release Lever 
Set or Release Switches to confirm brake status 
Ships via Motor Freight Only  
Ships in 10 Weeks, Peck MI 
Dated 01-2024 
(330LBS) Gross H 16" L 26" W 36" Skid
0 $12,438.00
3 AME-TM-1665 Ametek Gemco DC Brake 16 Inch 
Part TM-1665 
TM1665 
Heavy Duty AIST Spring Set Magnetic Release Shoe Brake Assembly 
Direct Current Clapper Type 
16 Inch Wheel Diameter, 
Voltage DC with Shunt or Series Wound Coils 
With Series Coils 1000 Ft. Lbs. 1/2 Hour & 650 Ft Lbs. 1 Hour 
With Shunt Coils 1000 Ft. Lbs. 1 Hour & 750 Ft Lbs 8 Hours 
Coil Part must be identified at time of order. 
A 16 X 6.75 Inch Brake Wheel is NOT included 
Rectifier for AC Voltages are available at additional cost 
Mfg in Peck MI 
Ships in 14 to 16 Weeks, Peck MI 
Dated 05-2024
- 0 $18,458.00
4 AME-TM-1985 Ametek Gemco Heavy Duty DC Brake 
Model TM-1985 
aka TM1985 
AIST Spring Set Magnetically Released, Shoe Brake Assembly 
Direct Current Clapper Type Steel Mill Brake 
For AIST Class D, E & F Overhead Cranes 
Voltage DC with Shunt or Series Wound Coils, Class "B" Insulation 
With Series Coils 2000 FT LBS 1/2 Hour & 1300 FT LBS 1 Hour 
With Shunt Coils 2000 FT LBS 1 Hour & 1500 Ft Lbs 8 Hours 
A Magnet / Shoe Travel Indicator to facilitates brake adjustment 
Twin-magnet coils are Epoxy-encapsulated for 
permanent protection against dust, water, grease, oil, 
chemicals and mechanical impact 
Coils can be replaced while the brake continues to set / under load 
Self Aligning Cast Iron Brake Shoes with Bonded Linings for maximum lining wear 
Premium Non-Asbestos High Temperature Brake Lining Material  
Options available at additional cost include: 
A Brake Wheel / Pulley, with a Pilot Bore or with a Finished, Hub Length Bore & Keyway 
Rectifiers for AC Voltages, with Enclosure or an Open Chassis Design for mounting in your panel 
Brake Enclosures, Designed to meet NEMA 4 or NEMA 3R ratings 
A Hand Release Lever, Resistors 
Part E019000001 With Shunt Wound Coils 
Ships in 12 Weeks, Peck MI 
Dated 1-19 
Motor Freight Only  
Brake Weight 870 LBS Net 
Dated 01-2024 
(900LBS) H 26" L 42" W 30" Skid / Box
- 0 $40,030.00
5 AME-TM-43 Ametek Gemco DC Brake Assembly TM 
Part TM-43 
TM43 
DC Magnetic Brake Assembly, Mfg to AIST Standards 
Heavy Duty Spring Set, Magnetic Release Shoe Brake Assembly  
Direct Current Clapper Type Brake 
4.5 Inch Diameter 
Provided with a Shunt Wound Coil Part E004051 
Designed for 1 or 8 Hour Duty Cycle 
80 Volts Intermittent 
64 Volts Continuous 
25 Ft LBS @ 1 Hour 
15 FT LBS @ 8 Hours 
Options Available some at additional cost include: 
A Brake Wheel 4.500 X 3.125 / Finished or Pilot Bore Part E004500 
Series Wound Coil, same cost 
AC to DC Rectifiers, Part E010326 with NEMA 4 Enclosure or Part E010326 Open Chassis Design 
A Manual Hand Release Lever, latching or non-latching 
NEMA 3 and 4 Brake Enclosures 
Normally a Stock Item @ BPI with Shunt Wound Coil 
Ships from Stock to 8 Weeks 
Dated 01-2024 
(41LBS) H 15" L 20" W 10" Box
0 $3,369.00
6 AME-TM-63 Ametek Gemco DC Brake Assembly 6" TM 
Model TM-63 
TM63 
DC Magnetic Brake Assembly, Meets the AIST Standards 
Heavy Duty Spring Set, Magnetic Release Shoe Brake Assembly 
Direct Current Clapper Type Brake 
6.00 Inch Diameter  
Provided with a Shunt Wound Coil E006026 
Designed for 1 or 8 Hour Duty Cycle 
80 Volts Intermittent 64 Volts Continuous 
50 FT LBS @ 1 Hour 
40 FT LBS @ 8 Hours 
Options Available some at additional cost include: 
A Brake Wheel 6.00 X 3.125 / Finished or Pilot Bore  
Series Wound Coil, same cost 
AC to DC Rectifiers 
Part E010326 with NEMA 4 Enclosure 
Part E010326 Open Chassis Design 
A Manual Hand Release Lever, latching or non-latching 
NEMA 3 and 4 Brake Enclosures 
Normally a Stock Item @ BPI 
Ships from Stock to 8 Weeks  
Dated 01-2024
0 $3,544.00
7 AME-TM-83 Ametek Gemco DC Brake Assembly 8 Inch 
Part TM-83 
TM83 
Heavy Duty AIST Spring Set Magnetic Release Shoe Brake Assembly 
Direct Current Clapper Type 
8 Inch Wheel Diameter 
Voltage DC with Shunt or Series Wound Coils 
With Shunt Coils 100 Ft. Lbs. 1 Hour & 75 Ft Lbs 8 Hours 
With Series Coils 100 Ft. Lbs. 1/2 Hour & 65 Ft Lbs. 1 Hour 
An 8 X 3.25 Inch Brake Wheel is not included 
Rectifier for AC Voltages is available at additional cost 
Normally a Stock item with Shunt Wound Coils 
Ships from Stock to 8 Weeks 
Dated 01-2024 
(100LBS)
- 2 $8,130.00
GEMCO TMSC AIST DC Brakes
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-TMSC-1035 Ametek Gemco Electric / Hydraulic Brake 
8 Inch Diameter DC Electric Brake Type TMSC 
Part TMSCH-83 
aka TMSCH83 
With a Hydraulic Actuating Cylinder 
Brake Assembly Only 
This Brake is Spring Set and Electrically Released 
When electrically released the Hydraulic Actuator becomes usable via a hydraulic brake system which is not included 
Voltage DC with Shunt Coils 100 Ft LBS 1 Hour & 75 FT LBS 8 Hours 
Brake Weight 155 LBS. plus skid 
A Brake Wheel is not included 
Ships in 8 weeks, Peck MI 
Dated 1-2020
5 $5,829.84
2 AME-TMSC-1355 Ametek Gemco Brake 13 Inch DC 
Part TM-1355 
aka TM1355 
Heavy Duty AISE Spring Set Magnetic Release Shoe Brake Assembly 
Direct Current Clapper Type 
13 Inch Wheel Diameter 
Voltage DC 
With Shunt or Series Wound Coils 
Series Coils 550 FT LBS 1/2 Hour & 365 FT LBS 1 Hour 
Shunt Coils 550 FT LBS 1 Hour & 400 FT LBS 8 Hours 
The TMSC Brake has interlocking shoe arms that allow single point adjustment for lining wear 
Brake Weight 290 LBS Gross 350 
Motor Freight Only 
Ships in 8 Weeks, Peck MI 
Dated 1-2020 
(200 LBS) H 36" L 36" W 36"
- 0 $13,433.04
3 AME-TMSC-1665 Ametek Gemco DC Magnetic Brake Assembly 
Part TMSC-1665 
aka TMSC1655 
Heavy Duty AIST Spring Set Magnetic Release Shoe Brake Assembly 
Direct Current Clapper Type 
Mfg to AIST Standards 
16 Inch Wheel Diameter 
Voltage DC with Shunt or Series Wound Coils 
With Series Coils 1000 Ft. Lbs. 1/2 Hour & 650 Ft Lbs. 1 Hour 
With Shunt Coils 1000 Ft. Lbs. 1 Hour & 750 Ft Lbs 8 Hours 
The TMSC Brake has interlocking shoe arms that allow for a single point adjustment for lining wear 
(520LBS) Shipping Weight 
A 16 X 6.75 Inch Brake Wheel is NOT included 
Rectifier for AC Voltages are available at additional cost 
Ships in 8 Weeks, Peck MI, Motor Freight Only 
Dated 1-2020 
(520LBS) H 24" L 32" W 20" Skid
1 $15,186.96
4 AME-TMSC-83 Ametek Gemco AIST 8 Inch DC Brake 
Part TMSC-83 
TMSC83 
Heavy Duty Spring Set Magnetically Released Brake Assembly 
Direct Current Clapper Type 
8 Inch Wheel Diameter 
Voltage DC with Shunt or Series Wound Coils 
With Series Coils 100 FT LB 1/2 Hour & 65 FT LB 1 Hour 
With Shunt Coils 100 FT LB 1 Hour & 75 FT LB 8 Hours 
A 8 X 3.25 Inch Brake Wheel is not included 
Rectifier for AC Voltages is available at additional cost 
Ships in 8 Weeks, Peck MI 
Dated 06-2022 
(110LBS) H 10" L 30" W 20"
1 $7,168.00
5 AME-TMSCH-1355 Ametek Gemco Electric / Hydraulic Brake 
Part TMSCH-1355 
13 Inch Diameter DC Electric Brake Type TMSC 
With a Hydraulic Actuating Cylinder 
Brake Assembly Only 
This Brake is Spring Set and Electrically Released 
When electrically released the Hydraulic Actuator becomes usable via a hydraulic brake system which is not included 
Voltage DC with Shunt Coils 550 Ft LBS 1 Hour & 400 FT LBS 8 Hours 
Hydraulic Operation 550 FT LBS Maximum 
Brake Weight 290 LBS. plus skid 
A Brake Wheel is not included 
Ships from stock to 6 weeks 
Dated 7/18
1 $13,767.84
6 AME-TMSCH-1355 SYSTEM Ametek Gemco Electric / Hydraulic Brake System 
Part TMSCH-1355 System 
13 Inch Diameter DC Electric Brake type TMSC with a Hydraulic Actuating Cylinder 
This Brake is Spring Set and Electrically Released, when electrically released the Hydraulic Actuator becomes usable by the hydraulic foot pedal 
System to include the Brake TMSC-1355 
Fluid Reservoir / Bleeder 
Bleeder Pushbutton Switch J01008 
Control Cylinder J017616 with Pedal J008219 
4 Armored Hose Kits J010797 
Hydraulic Tubing by 100 Feet 
Hydraulic Fittings, Gaskets, Brackets & Wagner Super Heavy Duty Brake Fluid 
Voltage DC with Shunt Wound Coils 
550 Ft LBS 1 Hour & 400 FT LBS 8 Hours 
550 Ft LBS via Hydraulic Operation 
Brake Weight 260 LBS., plus system components & shipping skid 
A Brake Wheel is not included 
Ships in 6 weeks, Peck MI 
Dated 7/18
- 0 $20,041.56
7 AME-TMSCH-1665 Ametek Gemco Electric / Hydraulic Brake 
16 Inch Diameter DC Electric Brake Type TMSC 
Part TMSCH-1665 
With a Hydraulic Actuating Cylinder 
Brake Assembly Only 
This Brake is Spring Set and Electrically Released 
When electrically released the Hydraulic Actuator becomes usable via a hydraulic brake system which is not included 
Voltage DC with Shunt Coils 1000 Ft LBS 1 Hour & 750 FT LBS 8 Hours 
Brake Weight 500 LBS. plus skid 
A Brake Wheel is not included 
Ships in 6 weeks, Peck MI 
Dated 7/18
- 0 $18,437.76
8 AME-TMSCH-83 Ametek Gemco Electric / Hydraulic Brake 
8 Inch Diameter DC Electric Brake Type TMSC 
Part TMSCH-83 
aka TMSCH83 
With a Hydraulic Actuating Cylinder 
Brake Assembly Only 
This Brake is Spring Set and Electrically Released 
When electrically released the Hydraulic Actuator becomes usable via a hydraulic brake system which is not included 
Voltage DC with Shunt Coils 100 Ft LBS 1 Hour & 75 FT LBS 8 Hours 
Brake Weight 155 LBS. plus skid 
A Brake Wheel is not included 
Ships in 8 weeks, Peck MI 
Dated 1-2020
- 0 $9,645.48
9 AME-TMSCH-83 SYSTEM Ametek Gemco Electric / Hydraulic Brake System 
Part TMSCH-83 System 
8 Inch Diameter DC Electric Brake type TMSC with a Hydraulic Actuating Cylinder 
This Brake is Spring Set and Electrically Released, when electrically released the Hydraulic Actuator becomes usable by the hydraulic foot pedal 
System to include the Brake TMSC-83 
Fluid Reservoir / Bleeder 
Bleeder Pushbutton Switch J01008 
Control Cylinder J017616 with Pedal J008219 
4 Armored Hose Kits J010797 
Hydraulic Tubing by 100 Feet 
Hydraulic Fittings, Gaskets, Brackets & Wagner Super Heavy Duty Brake Fluid 
Voltage DC with Shunt Wound Coils 
100 Ft LBS 1 Hour & 75 FT LBS 8 Hours 
Brake Weight XX LBS., plus system components & shipping skid 
A Brake Wheel is not included 
Ships in 6 weeks, Peck MI 
Dated 7/18
- 0 $15,366.24
GEMCO TM AIST DC Brakes Brake Wheels
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E004500 Ametek Gemco Brake Wheel 4.5 Inch 
Part E004500 
aka E004500999 
For the TM-43 DC Brake Assembly 
With the Offset Style Hub 
4.50 Inch Wheel Diameter 
3.13 Inch Face Width 
2.62 Inch Hub Offset 
2.00 Inch Hub Length Through Bore 
2.75 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
1.625 Inch Maximum Recommended Bore 
9850 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 
80-60-03 or 80-55-06 
Dated 01-2024 
(6LBS) H 5" L 5" W 5" Box
4 $1,416.00
2 AME-E004600 Ametek Gemco Brake Wheel 4.5 Inch - 0 $1,234.44
3 AME-E006500 Ametek Gemco Brake Wheel 6 Inch 
Part E006500 
aka E006500999 
Old Part 834D992H15 
For the TM-63 DC Brake Assembly 
And ET-6NA Thruster Brake 
With the Offset Style Hub, Stock Bore 
6.00 Inch Brake Wheel Diameter 
3.13 Inch Face Width 
3.00 Inch Hub Offset 
3.50 Inch Hub Length Through Bore 
3.25 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
2.00 Inch Maximum Recommended Bore 
7375 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 
Dated 01-2024 
(16LBS) H 5" L 6" W 6" Box
10 $1,508.00
4 AME-E008500 Ametek Gemco Brake Wheel 8 Inch TM 
Part E008500 
aka E008500999 
For the TM-83 DC Brake Assembly 
And ET-8 Thruster Brake 
With the Offset Style Hub, Stock Bore 
8.02 Inch Brake Wheel Diameter 
3.25 Inch Face Width 
3.00 Inch Hub Offset 
3.50 Inch Hub Length Through Bore 
3.25 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
2.25 Inch Maximum Recommended Bore 
5525 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 
Dated 10-2021
- 1 $1,523.88
5 AME-E008501 Ametek Gemco Brake Wheel. 8 Inch Diameter Brake Wheel with a Finished Bore and Keyway for a 603, 604, 803 & 804 Mill Motor - 0 $1,564.92
6 AME-E008514 Ametek Gemco Brake Wheel. 8 Inch Diameter Brake Wheel with a Finished Bore and Keyway for a 402, 602 0r 802 Mill Motor - 0 $1,405.08
7 AME-E008515 Ametek Gemco Brake Wheel. 8 Inch Diameter,3.25 Face Width, 4.25 Inch Offset, 1.875 Bore with a 1/2 X 1/4 Keyway - 0 $1,405.08
8 AME-E010500 Ametek Gemco Brake Wheel 10 Inch 
Part E010500 
aka E010500999 
For the TM-1035 DC Brake Assembly 
And ET-10 Thruster Brake 
With the Offset Style Hub, Stock Bore 
10.02 Inch Brake Wheel Diameter 
3.75 Inch Face Width 
4.25 Inch Hub Offset 
4.25 Inch Hub Length Through Bore 
3.75 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
2.75 Inch Maximum Recommended Bore 
4425 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 
80-60-03 or 80-55-06 
Ships in 4 Weeks, Peck MI 
Dated 10-2021 
(40LBS) H 6" L 10" W 10" Box
- 0 $2,179.44
9 AME-E010535 Ametek Gemco Brake Wheel. 10 Inch Diameter Brake Wheel with a Finished Bore and Keyway for a 606 & 806 Mill Motor 
Dated 1/18
- 0 $2,323.08
10 AME-E013500 Ametek Gemco Brake Wheel 13 Inch TM 
Part E013500 
aka E0135000999 
For the TM-1355 & ET-13 Brakes 
With the Offset Style Hub 
And a Pilot Bore 
13.02 Inch Brake Wheel Diameter 
5.75 Inch Face Width 
4.25 Inch Hub Offset 
5.38 Inch Hub Length Through Bore 
5.75 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
3.75 Inch Maximum Recommended Bore 
3400 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 
80-60-03 or 80-55-06 
Dated 10-2021 
Ships in 4 weeks, Peck MI 
(95LBS) H 9" L 13" W 13" Box
- 1 $3,477.60
11 AME-E013513 Ametek Gemco Brake Wheel 
Part E013513 
13 Inch Diameter with a Hub Length Bore & Keyway for an 808 Mill Motor 
With the AIST Standard Offset 
Ships in 4 weeks, Peck MI 
Dated 1/18 
(95LBS) H 9" L 13" W 13" Box
- 0 $3,110.40
12 AME-E013520 Ametek Gemco Brake Wheel 
Part E013520 
13 Inch Diameter with a hub length bore & keyway for a 612 & 812 Mill Motor 
With the AIST Standard Offset 
Dated 1/18 
UPS able 
Ships in 4 weeks, Peck MI
- 0 $3,110.40
13 AME-E013543 Ametek Gemco Brake Wheel 
Part E013543 
13 Inch Diameter Brake Wheel 
With a Hub Length Bore & Keyway for: 
603 604 803 & 804 Mill Motors 
Dated 1/18 
Ships in 4 weeks, Peck MI
- 0 $3,110.40
14 AME-E013544 Ametek Gemco Brake Wheel 
Part E013544 
13 Inch Diameter Brake Wheel 
With a Hub Length Bore & Keyway for: 
606 & 806 Mill Motors 
Dated 1/18 
Ships in 4 weeks, Peck MI
- 0 $3,110.40
15 AME-E016500 Ametek Gemco Brake Wheel 16 Inch TM 
Part E016500 
aka E0016500999 
For the TM-1655 DC Brake Assembly 
And ET-16 Thruster Brake 
With the Offset Style Hub, Stock Bore 
16.02 Inch Brake Wheel Diameter 
6.75 Inch Face Width 
6.50 Inch Hub Offset 
5.50 Inch Hub Length Through Bore 
7.00 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
4.50 Inch Maximum Recommended Bore 
2750 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 
Old WEST 7937A40H01 
Motor Freight Only 
Ship in 4 Weeks 
Dated 10-2021 
(150LBS) H 10" L 16" W 16" Box on Skid
- 1 $5,428.08
16 AME-E016506 Ametek Gemco Brake Wheel 16 Inch Diameter with a hub length bore & keyway for a 612 & 812 Mill Motor with the AISE Standard Offset - 0 $4,481.99
17 AME-E016513 Ametek Gemco Brake Wheel 16 Inch Diameter with a hub length bore & keyway for a 606 & 806 Mill Motor with the AISE Standard Offset - 0 $4,481.99
18 AME-E016526 Ametek Gemco Brake Wheel 16 Inch Diameter with a hub length bore & keyway for a 608 & 808 Mill Motor with the AISE Standard Offset - 0 $4,481.99
19 AME-E016528 Ametek Gemco Brake Wheel 16 Inch Diameter with a hub length bore & keyway for a 614 & 814 Mill Motor with the AISE Standard Offset - 0 $4,481.99
20 AME-E016538 Ametek Gemco Brake Wheel 16 Inch 
Part E016538 
With a Finished Bore & Keyway 
Ships in 4 Weeks, Peck MI 
Dated 1-19
- 0 $5,401.08
21 AME-E019500 Ametek Gemco Brake Wheel 19 Inch 
For the TM-1955 DC Brake Assembly 
And ET-19 Thruster Brake 
With the Offset Style Hub, Stock Bore 
19.02 Inch Brake Wheel Diameter 
8.75 Inch Face Width 
7.50 Inch Hub Offset 
6.00 Inch Hub Length Through Bore 
7.00 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
4.625 Inch Maximum Recommended Bore 
2350 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 
Part AME-E019500 
(250LBS) H 12" L 19" W 19" Box on Skid, Motor Freight Only 
[Amazon]
- 1 $5,406.05
22 AME-E023500 Ametek Gemco Brake Wheel 23 Inch 
For the TM-2375 DC Brake Assembly 
With the Offset Style Hub, Stock Bore 
23.02 Inch Brake Wheel Diameter 
11.25 Inch Brake Face Width 
8.75 Inch Hub Offset from Centerline 
7.31 Inch Hub Length Through Bore 
8.50 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
5.50 Inch Maximum Recommended Bore 
1925 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 
Part AME-E023500 
(450LBS) H 12" L 23" W 23" Box on Skid, Motor Freight Only 
[Amazon]
- 1 $9,256.41
23 AME-E030500 Ametek Gemco Brake Wheel 30 Inch 
For the TM-3014 DC Brake Assembly 
With the Offset Style Hub, Stock Bore 
30.04 Inch Brake Wheel Diameter 
14.25 Inch Brake Face Width 
10.75 Inch Hub Offset from Centerline 
9.25 Inch Hub Length Through Bore 
13.00 Inch Hub Diameter 
Solid Hub with Bore Center Drilled  
7.50 Inch Maximum Recommended Bore 
1475 Maximum RPM 
Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 
Part AME-E030500 
(850LBS) H 19" L 30" W 30" Box on Skid, Motor Freight Only 
[Amazon]
- 1 $15,427.34
GEMCO TM AIST DC Brakes Brake Shoes, Linings, Bolts and Pins
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E004047 Ametek Gemco Brake Shoe Assembly TM-43 
Part E004047 
Brake Shoe & Lining 
For a TM-43 4.5 Inch Electric Brake 
Bonded Premium Non-Asbestos Lining Material 
2 Per brake, sold each 
70 Degree Arc 
aka 645C555G02 E004047002 
Dated 01-2024 
(2LBS) H 4" L 5" W 4" Box STOCK @ BPI
- 0 $749.00
2 AME-E004070 Ametek Gemco Bolt 
Part E004070 
Hardened Brake Shoe Bolt 
For a TM-43 or TM-63 DC Brake 
aka 27D7221H04 E004070006 
Item 15, 2 per brake, sold each 
Dated 01-2024 
(1LB)
- 0 $237.00
3 AME-E006023 Ametek Gemco Brake Shoe Assembly TM 6" 
Part E006023 
aka E006023002 
For 6 Inch a TM-63, ET6 or ET6NA Brake 
Bonded Premium Non-Asbestos Lining Material 
Sold each, 2 per Brake 
70 Degree Arc 
Old Part 645C162G02 & 645C162J04 Casting # 
Normally a Stock Item @ BPI 
Ships from Stock to 4 weeks 
Dated 01-2024 
(2LBS) H 4" L 10" W 4" Box
0 $806.00
4 AME-E008025 Ametek Gemco Brake Shoe Assembly TM 8" 
Part E008025 
aka E008025002 
Brake Shoe & Lining Assembly 
For an 8 Inch TM-83 or ET-8 Brake 
Item 14, 2 per brake, sold each 
Premium Bonded, Non-Asbestos Material 
Old WEST 439C314G02 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(3LBS) H 4" L 8" W 4" Box
0 $880.00
5 AME-E010047 Ametek Gemco Brake Shoe Assembly TM 10" 
Part E010047 
aka E0100470002 
Old Part 635C292G01 
For a 10 Inch TM-1035 or ET-10 Brake 
Item 14 
2 per brake, sold each 
Premium OEM Non-Asbestos Bonded Lining Material 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(5LBS) H 4" L 10" W 4" Box
0 $1,060.00
6 AME-E010107 Ametek Gemco Shoe & Lining CB 10" 
Part E010107 
aka E010107006 
Old Part 254C27G04 
Outer Brake Shoe 
For a CB-160 10 Inch Electric Brake 
Bonded Premium Non-Asbestos Lining Material  
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(15LBS)
0 $1,807.00
7 AME-E010108 Ametek Gemco Lining & Rivet Kit CB160 
Part E010108 
aka E010108005 
Old Part 3279B95G04 
For a 10 Inch CB-160 Solenoid Brake 
Premium OEM Non-Asbestos Drilled Linings 
Qty. 2, with 6 Drilled and Countersunk Holes & 18 Brass Push Pins 
Linings for 2 Brake Shoes - 1 Pair 
Normally a Stock Item at BPI 
Ships from our Stock to 2 Weeks 
C. F. for Pricing 
Dated 01-2024 
(2LBS) H 4" L 8" W 4" Box
- 6 $2,529.80
8 AME-E013025 Ametek Gemco Brake Shoe & Lining TM13 
Part E013025 
aka E013025002 
Old Part 439C201G01  
For a 13 Inch TM1355 or ET13 Brake 
Item 14, 2 per brake, sold each 
Bonded, Premium Non-Asbestos Lining Material 
Normally a Stock item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(12LBS) H 8" L 12" W 8" Box
- 0 $1,275.00
9 AME-E013053 Ametek Gemco Bolt TM1355 
Part E013053 
aka E013053006 
Old Part 24D6387G04  
Hardened Brake Shoe Bolt Assembly 
For 13 Inch TM-1355 DC Brake 
Item 16, 2 per brake, sold each 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(5LBS)
- 0 $367.00
10 AME-E016025 Ametek Gemco Brake Shoe Assembly TM 16" 
Part E016025 
aka E016025002 
Old Part 635C227G01 
For a 16 Inch TM-1665 or ET-16 Brake 
Premium Non-Asbestos Material Bonded to the Brake Shoe 
Item 14, 2 per brake, sold each 
Dated 01-2024 
(31LBS) H 12" L 10" W 12" Box
0 $1,698.00
11 AME-E016027 Ametek Gemco Bolt 
Part E016027 
Old Part 24D6387G03 
Brake Shoe Bolt 
For a 16 Inch TM-1655 & ET-16 Brake 
Includes Hardened Bolt 
Nut & Pin 
Item 16, 2 per brake, sold each 
Ships in 3 Weeks, Peck MI 
Dated 01-2024 
(8LBS) H 4" L 8" W 4" Box
- 0 $420.00
12 AME-E019024 Ametek Gemco Brake Shoe Assembly TM 19" 
Part E019024 
aka E019024002 
aka Old Part 439C394G01 
Brake Shoe & Lining Assembly 
For a 19 Inch TM-1985 or ET-19 Brake 
Premium,Non-Asbestos Lining Material 
Bonded to the Brake Shoe  
Qty. 1, 2 per brake, sold each 
Item 14 
Normally a Stock Item @ BPI 
Ships from Stock to 6 Weeks 
Dated 01-2024 
(45LBS) H 12" L 20" W 12" Box
- 0 $2,192.00
13 AME-E019027 Ametek Gemco Brake Shoe Bolt 
Part E019027 
For a TM-1985 or ET19 Brake Shoe 
Item 16, 2 per brake, sold each 
1.25 Inch Dia 
10.5 Inch Long 
Threaded both ends 
1 end has pin hole, Nut for use with pin, 1 pin 
Nut is on & pinned 
C. F. for Pricing 
Dated 01-2024 
aka 24D6387G01 
(5 LBS)
- 0 Call   Call
14 AME-E019065 Ametek Gemco Lining Kit 19" 
Part E019065 
aka E019065005 
Old Part 861C691G20 439C394H02 
For a 19 Inch TM-1985 DC Brake 
Pair of Drilled & Countersunk Linings 
Includes 26 Rivets 10-18, 24 Required 
Also available undrilled for bonded brake shoes 
Premium Non Asbestos Material 
MSDS Sheets Available 
Ships from Stock to 3 Weeks 
C. F. for Pricing 
Dated 01-2024 
(10LBS) H 10" L 18" W 10" Box
1 Call   Call
15 AME-E023025 Ametek Gemco Brake Shoe & Lining TM23 
Part E023025 
aka E023025999 
Old Part 635C316G01 
For a 23 Inch TM-2311 DC Brake 
Item 14, 2 per brake, sold each 
Premium Bonded, Non-Asbestos Material 
Ships in 10 to 11 Weeks, Peck MI 
C. F. for Pricing 
Dated 01-2024
- 0 Call   Call
16 AME-E023028 Ametek Gemco Brake Shoe Bolt TM-2311 
Part E023028 
aka E023028002 
Hardened Brake Shoe Bolt 
For Mounting the Brake Shoes 
Includes Bolt Nut & Lockwasher 
For a 23 Inch TM-2311 DC Brake 
Item 16, 2 per Brake, sold each 
Old WEST 24D6387G02 
Ships in 4 Weeks 
C. F. for Pricing 
Dated 01-2024 
(12LBS) H 4" L 12" W 4" Box
- 0 Call   Call
17 AME-E030040 Ametek Gemco Bolt, Hardened Brake Shoe Bolt Assembly for a TM-3014 30 Inch Brake. Includes the Hex Nut. Ref. # 16, 2 per brake but sold individually, 450A869G01  
C. F. for Pricing 
Dated 01-2024
- 0 Call   Call
 
Ametek Gemco Magnetic DC Shoe Brakes (TM Style) Replacement Parts
 
Ametek Gemco Solenoid DC Shoe Brakes (TM Style Brakes, DC Heavy Duty AISE Spring Set Magnetic Release Shoe Brakes):
 
  • TM43 Brake Assembly & Parts
  • TM63 Brake Assembly & Parts
  • TM83 Brake Assembly & Parts
  • TM1035 Brake Assembly & Parts
  • TM1355 Brake Assembly & Parts
  • TM1655 Brake Assembly & Parts
  • TM1985 Brake Assembly & Parts
  • TM2311 Brake Assembly & Parts
  • TM3014 Brake Assembly & Parts
 
 
Secure Online Order
 

 
Secure Online Order
 
14,354 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 

Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 RLS
  • 2006 RLS
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
MSDS
   - MSDS Information
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
  ACH Form: Word   /   PDF
Supplier of Industrial Brake Parts Since 1985
This web site: Owned and operated by Brake Products, Inc.
Designed and maintaned by Internet and Database Software, Inc.