Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,048 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,354 part numbers: Motion Control Products     GLEASON 17,991 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,205 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 916 part numbers: Electrical Control Products   HUBBELL 8,396 part numbers: Electrical Control Products   SUPERBOLT 122 part numbers: Fastening Solutions   RENOLD 406 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

Gemco Industrial Brakes Electro-Thrust Brakes - Electro-Thrust Shoe Brakes (ET Style)   DESCRIPTION   The Electro-Thrust Shoe Brakes have been in service for over 10 years. AISE sizes range from 8 inches in diameter up to 30 inch diameter wheels. Torque values range from 100 foot-pounds to 9,000 ft./lbs.! We also manufacture a line of non-AISE rated brakes. The brakes are spring set for fail-safe operation with an electro-hydraulic actuator that overcomes a setting spring and releases the brake. The actuator is stroked by means of applying power, either AC or DC, to an integral motor attached to a twin cavity housing. The housing is filled with fluid and as the motor spins it creates fluid motion. As the fluid travels through the housing it applies upward pressure to a piston that overcomes the setting spring to release the brake. Cutting power to the motor reverses this function and the spring then gently sets the brake.   The Series ET style of shoe brakes are spring set and electrically released by a continuously rated, sealed electrohydraulic actuator. This brake provides smooth brake setting due to the response of the actuator. This inherent cushion effect is desirable for many brake applications. Rugged construction makes this brake suitable for steel mill cranes, container cranes, stacker reclaimers, lock and dam gates, and other heavy-duty applications.   Documentation Download: • Industrial Brake Brochure • Industrial Brake Systems Application Guide • Electro Thrust (Model ET) Shoe Brakes Manual   CAD Drawings Download:   • ET6NA (PDF)   • ET8 (DXF, ZIP)   • ET8 (PDF)   • ET8NA (PDF)   • ET10 (PDF)   • ET11NA (PDF)   • ET13 (PDF)   • ET13, Certified (PDF) • ET14NA (PDF) • ET16 (PDF) • ET18NA (PDF) • ET19 (PDF) • ETH8NA (PDF) • ETH10 (PDF) • ETH14NA (PDF) • ETH14NA, Certified (PDF)   GEMCO ET Electro-Thrust Shoe Brakes No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-ET-6NA Ametek Gemco Electro-Thrust Brake Assembly ET-6NA  6 Inch Diameter Brake  60 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 6 X 3.125, Finished or Pilot Bore Part E006500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships in 6 Weeks  Dated 06-2022  Ships via Motor Freight Only   120 LBS Net, 150 LBS Gross - 1 $5,201.00 2 AME-ET-8 Ametek Gemco Electro-Thrust Brake Assembly  Part ET-8  8 Inch Diameter Brake  Manufactured to AIST Specifications  100 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships from Stock to 5 Weeks  Motor Freight Only  140 LBS Net, 170 LBS Gross  Dated 1-2020 - 1 $5,282.28 3 AME-ET-8DC Ametek Gemco Electro-Thrust Brake Assembly   Part ET-8DC  Manufactured to AIST Specifications  8 Inch Diameter Brake  100 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  140 LBS Net, 170 LBS Gross  Ships via Motor Freight Only  Dated 1/18 - 0 $7,850.52 4 AME-ET-8NA Ametek Gemco Electro-Thrust Brake Assembly  Part ET-8NA  8 Inch Diameter Brake  160 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only   140 LBS Net, 170 LBS Gross  Ship in 6 to 8 Weeks, Peck MI  Dated 06-2022 - 3 $5,660.00 5 AME-ET-10 Ametek Gemco Electro-Thrust Brake Assembly ET-10  10 Inch Diameter Brake  Manufactured to AIST Specifications  200 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.3 to 7.3 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 10 X 3.75 Inch, Finished or Pilot Bore Part E010500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only   150 LBS Net, 180 LBS Gross  Ships in 8 to 10 Weeks  Dated 01-2023 - 0 $7,383.00 6 AME-ET-11NA Ametek Gemco Electro-Thrust Brake Assembly 11"  Part ET-11NA  11 Inch Diameter Brake  400 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.3 to 7.3 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 11 X 5.00 Inch, Finished or Pilot Bore Part E011500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only  Ships in 8 to 10 Weeks, Peck MI  Dated 01-2023  170 LBS Net, 200 LBS Gross - 0 $8,725.00 7 AME-ET-13 Ametek Gemco Electro-Thrust Brake Assembly ET-13  13 Inch Diameter Brake  Manufactured to AIST Specifications  550 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.2 to 4.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 13 X 5.75 Inch, Finished or Pilot Bore Part E013500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  250 LBS Net, 280 LBS Gross  Ships via Motor Freight Only   Ships in 10 Weeks, Peck MI  Dated 06-2022 - 0 $9,273.00 8 AME-ET-13DC Ametek Gemco Electro-Thrust Brake Assembly ET-13  13 Inch Diameter Brake  Manufactured to AIST Specifications  550 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.2 to 4.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 13 X 5.75 Inch, Finished or Pilot Bore Part E013500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  250 LBS Net, 280 LBS Gross  Ships via Motor Freight Only - 0 $10,053.71 9 AME-ET-14NA Ametek Gemco Electro-Thrust Brake Assembly  Part ET-14NA  14 Inch Diameter Brake  800 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.2 to 4.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 14 X 4.25 Inch, Finished or Pilot Bore Part E014500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  360 LBS Net, 410 LBS Gross  Ships via Motor Freight Only   Ships in 6 Weeks  Dated 06-2022 - 0 $11,797.00 10 AME-ET-14NA DC Ametek Gemco Electro-Thrust Brake Assembly ET-14NADC  14 Inch Diameter Brake  800 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.75 Seconds  With Adjustable Valve 1.2 to 4.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 14 X 4.25 Inch, Finished or Pilot Bore Part E014500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  320 LBS Net, 370 LBS Gross  Ships via Motor Freight Only - 0 $12,007.42 11 AME-ET-16 Ametek Gemco Electro-Thrust Brake Assembly ET-16  16 Inch Diameter Brake  Manufactured to AIST Specifications  1000 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.45 Seconds  With Adjustable Valve 0.8 to 3.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  400 LBS Net, 430 LBS Gross  Ships via Motor Freight Only  Ships in 6 Weeks, Peck MI  Dated 01-2021 - 0 $12,243.96 12 AME-ET-16DC Ametek Gemco Electro-Thrust Brake Assembly ET-16  16 Inch Diameter Brake  Manufactured to AIST Specifications  1000 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.45 Seconds  With Adjustable Valve 0.8 to 3.8 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  400 LBS Net, 430 LBS Gross  Ships via Motor Freight Only - 0 $12,736.42 13 AME-ET-18NA Ametek Gemco Electro-Thrust Brake Assembly ET-18NA  18 Inch Diameter Brake  1500 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  580 LBS Net, 610 LBS Gross  Ships via Motor Freight Only   Dated 06-2022 - 0 $15,949.00 14 AME-ET-18NA DC Ametek Gemco Electro-Thrust Brake Assembly ET-18NADC  18 Inch Diameter Brake  1500 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  580 LBS Net, 610 LBS Gross  Ships via Motor Freight Only - 0 $15,221.50 15 AME-ET-19 Ametek Gemco Electro-Thrust Brake Assembly ET-19  19 Inch Diameter Brake  Manufactured to AIST Specifications  2000 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  640 LBS Net, 670 LBS Gross  Ships via Motor Freight Only - 0 $15,275.52 16 AME-ET-19NA Ametek Gemco Electro-Thrust Brake Assembly ET-19NA  19 Inch Diameter Brake  1600 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC is required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 0.35 Seconds  With Adjustable Valve 0.7 to 3.0 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  640 LBS Net, 670 LBS Gross  Ships via Motor Freight Only  Pricing on request - 0 Call   Call GEMCO ETH Electro-Thrust Shoe Brakes No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-ETH-08 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 100 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $7,159.31 2 AME-ETH-08NA-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 160 LB FT, 230 Volt DC Motor, Built to AISE Specifications with the exception of the brake torque which is 60 FT LB higher than AISE specifies, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 1.1 Sec. With Adjusting Valve 1.5 to 7.2 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application (165LBS) Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $9,404.63 3 AME-ETH-08NA-DC SYSTEM Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $14,860.78 4 AME-ETH-08NA BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 160 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $7,159.31 5 AME-ETH-10-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 200 LB FT, 230 Volt DC Motor, Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # 82300014 (165LBS) - 0 $10,475.99 6 AME-ETH-10 1 BRKSYS AC Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 200 Ft LB, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. System includes: Qty. 1, ETH-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $13,197.58 7 AME-ETH-10 2 BRKSYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $26,809.88 8 AME-ETH-10 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake, 200 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 150 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $11,695.00 9 AME-ETH-10 BRAKE SYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $15,853.30 10 AME-ETH-11 BRAKE ONLY 400 FT LBS  Dated 1/18 - 0 $10,378.80 11 AME-ETH-13 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $9,795.59 12 AME-ETH-13 BRAKE ONLY DC Ametek Gemco spring applied, electro-hydraulically released, 13 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 230 Volt DC Shunt Wound Motor.550 FT LBS. - 0 $12,451.30 13 AME-ETH-13 BRAKE SYS Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters. System includes: Qty. 1, ET-13H Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $14,897.50 14 AME-ETH-13 BRAKE SYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 13 Inch Diameter Brake, 550 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-13 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $17,553.22 15 AME-ETH-14NA Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). The thruster includes a 230VDC motor. The brake is set up for a 14" diameter wheel which is not included. Two 10797 armored hose kits are included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included - 0 $11,793.58 16 AME-ETH-14NA-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 14 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 800 LB FT, 230 Volt DC Motor, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.45 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # (300LBS) - 0 $14,449.30 17 AME-ETH-14NA BO Ametek Gemco spring applied, electro-hydraulically released, 14 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 460 / 230 Volt AC motor. 800 FT LBS. - 0 $11,803.30 18 AME-ETH-16 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters 01/11 - 0 $10,907.98 19 AME-ETH-16 BRAKE ONLY DC Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake.The thruster includes a 230VDC motor. The brake is set up for a 16" diameter wheel which is not included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included. - 0 $13,092.82 20 AME-ETH-16 BRAKE SYS DC Ametek Gemco spring applied, electro-hydraulically released brake system with hydraulic actuator for auxiliary manual cab control via foot pedal. 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake. The thruster includes a 230VDC Shunt Wound Motor. The brake is set up for a 16" diameter wheel which is not included. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $19,987.53 21 AME-ETH-16 BRAKE SYSTEM AC Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $17,835.10 GEMCO ET/ETH Brakes Brake Shoes, Linings, Bolts and Pins No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-E004047 Ametek Gemco Brake Shoe Assembly TM-43  Part E004047  Brake Shoe & Lining  For a TM-43 4.5 Inch Electric Brake  Bonded Premium Non-Asbestos Lining Material  2 Per brake, sold each  70 Degree Arc  aka 645C555G02 E004047002  Dated 01-2024  (2LBS) H 4" L 5" W 4" Box STOCK @ BPI - 0 $749.00 2 AME-E004070 Ametek Gemco Bolt  Part E004070  Hardened Brake Shoe Bolt  For a TM-43 or TM-63 DC Brake  aka 27D7221H04 E004070006  Item 15, 2 per brake, sold each  Dated 01-2024  (1LB) - 0 $237.00 3 AME-E006023 Ametek Gemco Brake Shoe Assembly TM 6"  Part E006023  aka E006023002  For 6 Inch a TM-63, ET6 or ET6NA Brake  Bonded Premium Non-Asbestos Lining Material  Sold each, 2 per Brake  70 Degree Arc  Old Part 645C162G02 & 645C162J04 Casting #  Normally a Stock Item @ BPI  Ships from Stock to 4 weeks  Dated 01-2024  (2LBS) H 4" L 10" W 4" Box 0 $806.00 4 AME-E008025 Ametek Gemco Brake Shoe Assembly TM 8"  Part E008025  aka E008025002  Brake Shoe & Lining Assembly  For an 8 Inch TM-83 or ET-8 Brake  Item 14, 2 per brake, sold each  Premium Bonded, Non-Asbestos Material  Old WEST 439C314G02  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (3LBS) H 4" L 8" W 4" Box 0 $880.00 5 AME-E010047 Ametek Gemco Brake Shoe Assembly TM 10"  Part E010047  aka E0100470002  Old Part 635C292G01  For a 10 Inch TM-1035 or ET-10 Brake  Item 14  2 per brake, sold each  Premium OEM Non-Asbestos Bonded Lining Material  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (5LBS) H 4" L 10" W 4" Box 0 $1,060.00 6 AME-E010107 Ametek Gemco Shoe & Lining CB 10"  Part E010107  aka E010107006  Old Part 254C27G04  Outer Brake Shoe  For a CB-160 10 Inch Electric Brake  Bonded Premium Non-Asbestos Lining Material   Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (15LBS) 0 $1,807.00 7 AME-E010108 Ametek Gemco Lining & Rivet Kit CB160  Part E010108  aka E010108005  Old Part 3279B95G04  For a 10 Inch CB-160 Solenoid Brake  Premium OEM Non-Asbestos Drilled Linings  Qty. 2, with 6 Drilled and Countersunk Holes & 18 Brass Push Pins  Linings for 2 Brake Shoes - 1 Pair  Normally a Stock Item at BPI  Ships from our Stock to 2 Weeks  C. F. for Pricing  Dated 01-2024  (2LBS) H 4" L 8" W 4" Box - 6 $2,529.80 8 AME-E013025 Ametek Gemco Brake Shoe & Lining TM13  Part E013025  aka E013025002  Old Part 439C201G01   For a 13 Inch TM1355 or ET13 Brake  Item 14, 2 per brake, sold each  Bonded, Premium Non-Asbestos Lining Material  Normally a Stock item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (12LBS) H 8" L 12" W 8" Box - 0 $1,275.00 9 AME-E013053 Ametek Gemco Bolt TM1355  Part E013053  aka E013053006  Old Part 24D6387G04   Hardened Brake Shoe Bolt Assembly  For 13 Inch TM-1355 DC Brake  Item 16, 2 per brake, sold each  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (5LBS) - 0 $367.00 10 AME-E016025 Ametek Gemco Brake Shoe Assembly TM 16"  Part E016025  aka E016025002  Old Part 635C227G01  For a 16 Inch TM-1665 or ET-16 Brake  Premium Non-Asbestos Material Bonded to the Brake Shoe  Item 14, 2 per brake, sold each  Dated 01-2024  (31LBS) H 12" L 10" W 12" Box 0 $1,698.00 11 AME-E016027 Ametek Gemco Bolt  Part E016027  Old Part 24D6387G03  Brake Shoe Bolt  For a 16 Inch TM-1655 & ET-16 Brake  Includes Hardened Bolt  Nut & Pin  Item 16, 2 per brake, sold each  Ships in 3 Weeks, Peck MI  Dated 01-2024  (8LBS) H 4" L 8" W 4" Box - 0 $420.00 12 AME-E019024 Ametek Gemco Brake Shoe Assembly TM 19"  Part E019024  aka E019024002  aka Old Part 439C394G01  Brake Shoe & Lining Assembly  For a 19 Inch TM-1985 or ET-19 Brake  Premium,Non-Asbestos Lining Material  Bonded to the Brake Shoe   Qty. 1, 2 per brake, sold each  Item 14  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks  Dated 01-2024  (45LBS) H 12" L 20" W 12" Box - 0 $2,192.00 13 AME-E019027 Ametek Gemco Brake Shoe Bolt  Part E019027  For a TM-1985 or ET19 Brake Shoe  Item 16, 2 per brake, sold each  1.25 Inch Dia  10.5 Inch Long  Threaded both ends  1 end has pin hole, Nut for use with pin, 1 pin  Nut is on & pinned  C. F. for Pricing  Dated 01-2024  aka 24D6387G01  (5 LBS) - 0 Call   Call 14 AME-E019065 Ametek Gemco Lining Kit 19"  Part E019065  aka E019065005  Old Part 861C691G20 439C394H02  For a 19 Inch TM-1985 DC Brake  Pair of Drilled & Countersunk Linings  Includes 26 Rivets 10-18, 24 Required  Also available undrilled for bonded brake shoes  Premium Non Asbestos Material  MSDS Sheets Available  Ships from Stock to 3 Weeks  C. F. for Pricing  Dated 01-2024  (10LBS) H 10" L 18" W 10" Box 1 Call   Call 15 AME-E023025 Ametek Gemco Brake Shoe & Lining TM23  Part E023025  aka E023025999  Old Part 635C316G01  For a 23 Inch TM-2311 DC Brake  Item 14, 2 per brake, sold each  Premium Bonded, Non-Asbestos Material  Ships in 10 to 11 Weeks, Peck MI  C. F. for Pricing  Dated 01-2024 - 0 Call   Call 16 AME-E023028 Ametek Gemco Brake Shoe Bolt TM-2311  Part E023028  aka E023028002  Hardened Brake Shoe Bolt  For Mounting the Brake Shoes  Includes Bolt Nut & Lockwasher  For a 23 Inch TM-2311 DC Brake  Item 16, 2 per Brake, sold each  Old WEST 24D6387G02  Ships in 4 Weeks  C. F. for Pricing  Dated 01-2024  (12LBS) H 4" L 12" W 4" Box - 0 Call   Call 17 AME-E030040 Ametek Gemco Bolt, Hardened Brake Shoe Bolt Assembly for a TM-3014 30 Inch Brake. Includes the Hex Nut. Ref. # 16, 2 per brake but sold individually, 450A869G01   C. F. for Pricing  Dated 01-2024 - 0 Call   Call   GEMCO ET Brakes Replacement Parts   GEMCO ET8 Brakes Replacement Parts No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-E008025 Ametek Gemco Brake Shoe Assembly TM 8"  Part E008025  aka E008025002  Brake Shoe & Lining Assembly  For an 8 Inch TM-83 or ET-8 Brake  Item 14, 2 per brake, sold each  Premium Bonded, Non-Asbestos Material  Old WEST 439C314G02  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (3LBS) H 4" L 8" W 4" Box 0 $880.00 2 AME-E010070 Ametek Gemco Bolt. Brake Shoe Bolt Assembly  Hardened Bolt with Nut, Lockwasher & Cotter Pin  For a TM-83, TM-1035 & ET-10 Brake  2 per brake, sold each  aka 27D7221H14  Dated 01-2024 - 2 $243.00 3 AME-PSD0146500 Ametek Gemco Repair Kit Thruster  Part PSD0146500  Repair - Seal Kit  For Thruster Assemblies:  PSD0151705  PSD0148317  PSD0148305  PSD0165807  PSD0175907  Brakes:  ET8, ET10 ET11 & ET11NA  Item 8A  Ships in 6 to 8 Weeks, Peck MI  Dated 10-2021  (2LBS) H 4" L 6" W 4" Box 0 $6,419.52 GEMCO ET10 Brakes Replacement Parts No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-E010047 Ametek Gemco Brake Shoe Assembly TM 10"  Part E010047  aka E0100470002  Old Part 635C292G01  For a 10 Inch TM-1035 or ET-10 Brake  Item 14  2 per brake, sold each  Premium OEM Non-Asbestos Bonded Lining Material  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (5LBS) H 4" L 10" W 4" Box 0 $1,060.00 2 AME-E010070 Ametek Gemco Bolt. Brake Shoe Bolt Assembly  Hardened Bolt with Nut, Lockwasher & Cotter Pin  For a TM-83, TM-1035 & ET-10 Brake  2 per brake, sold each  aka 27D7221H14  Dated 01-2024 - 2 $243.00 3 AME-E010309 Ametek Gemco Tie Rod Assembly for an ET-10 Brake - 1 $406.08 4 AME-E010286 Ametek Gemco Self Adjust Assembly Kit for an ET10 Brake - 0 $1,427.76 5 AME-PSD0146500 Ametek Gemco Repair Kit Thruster  Part PSD0146500  Repair - Seal Kit  For Thruster Assemblies:  PSD0151705  PSD0148317  PSD0148305  PSD0165807  PSD0175907  Brakes:  ET8, ET10 ET11 & ET11NA  Item 8A  Ships in 6 to 8 Weeks, Peck MI  Dated 10-2021  (2LBS) H 4" L 6" W 4" Box 0 $6,419.52 6 AME-E010266 Ametek Gemco Spring. Main Spring on a ET-10 Brake - 0 $71.28 7 AME-E010312 Ametek Gemco Pin Kit for an ET-10 Thruster Brake. Includes Base Pins & Top Pins with Retaining Rings - 0 $304.56 GEMCO ET13 Brakes Replacement Parts No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-E013194 Ametek Gemco Base / Frame  Part E013194  For a 13 Inch ET-13 Thruster Brake   Item 1, 1 per brake  Dated - 0 $2,292.84 2 AME-E013025 Ametek Gemco Brake Shoe & Lining TM13  Part E013025  aka E013025002  Old Part 439C201G01   For a 13 Inch TM1355 or ET13 Brake  Item 14, 2 per brake, sold each  Bonded, Premium Non-Asbestos Lining Material  Normally a Stock item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (12LBS) H 8" L 12" W 8" Box - 0 $1,275.00 3 AME-E013053 Ametek Gemco Bolt TM1355  Part E013053  aka E013053006  Old Part 24D6387G04   Hardened Brake Shoe Bolt Assembly  For 13 Inch TM-1355 DC Brake  Item 16, 2 per brake, sold each  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (5LBS) - 0 $367.00 4 AME-PM0139600 Ametek Gemco Arm. Outer Shoe Arm on a ET13 Brake. 1 Pair. Item 4 4/7 - 0 $597.24 5 AME-E013228 Ametek Gemco Tie Rod Assembly  Part E013228  For a 13 Inch ETH-13EB50 Thruster Brake  Item 5, 1 per brake  Dated - 1 $457.92 6 AME-E013240 Ametek Gemco Tie Rod Assembly  Part E013240  Self Adjust Tie Rod Assembly  For a 13 Inch ET-13 Thruster Brake with the Self Adjust Option  Item 5A, 1 per brake  Dated - 0 $1,469.88 7 AME-E013225 Ametek Gemco Arm  Part E013225  Inner Shoe Arm  For a 13 Inch ET-13 Thruster Brake  Item 6 / 1 Pair  Dated - 0 $711.72 8 AME-E013229 Ametek Gemco Force Arm Assembly  Part E013229  For a 13 Inch ET-13 Thruster Brake  Item 7, 1 per brake  Dated - 0 $361.80 9 AME-PSD0146500 Ametek Gemco Repair Kit Thruster  Part PSD0146500  Repair - Seal Kit  For Thruster Assemblies:  PSD0151705  PSD0148317  PSD0148305  PSD0165807  PSD0175907  Brakes:  ET8, ET10 ET11 & ET11NA  Item 8A  Ships in 6 to 8 Weeks, Peck MI  Dated 10-2021  (2LBS) H 4" L 6" W 4" Box 0 $6,419.52 10 AME-E013231 Ametek Gemco Pin Kit for a ET-13 Brake. Includes Base Pins and Top Pins with Retaining Rings. Item 10 - 0 $406.08 GEMCO ET16 Brakes Replacement Parts No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-E016025 Ametek Gemco Brake Shoe Assembly TM 16"  Part E016025  aka E016025002  Old Part 635C227G01  For a 16 Inch TM-1665 or ET-16 Brake  Premium Non-Asbestos Material Bonded to the Brake Shoe  Item 14, 2 per brake, sold each  Dated 01-2024  (31LBS) H 12" L 10" W 12" Box 0 $1,698.00 2 AME-E016027 Ametek Gemco Bolt  Part E016027  Old Part 24D6387G03  Brake Shoe Bolt  For a 16 Inch TM-1655 & ET-16 Brake  Includes Hardened Bolt  Nut & Pin  Item 16, 2 per brake, sold each  Ships in 3 Weeks, Peck MI  Dated 01-2024  (8LBS) H 4" L 8" W 4" Box - 0 $420.00 3 AME-PSD0146500 Ametek Gemco Repair Kit Thruster  Part PSD0146500  Repair - Seal Kit  For Thruster Assemblies:  PSD0151705  PSD0148317  PSD0148305  PSD0165807  PSD0175907  Brakes:  ET8, ET10 ET11 & ET11NA  Item 8A  Ships in 6 to 8 Weeks, Peck MI  Dated 10-2021  (2LBS) H 4" L 6" W 4" Box 0 $6,419.52 GEMCO ET19 Brakes Replacement Parts No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-E019024 Ametek Gemco Brake Shoe Assembly TM 19"  Part E019024  aka E019024002  aka Old Part 439C394G01  Brake Shoe & Lining Assembly  For a 19 Inch TM-1985 or ET-19 Brake  Premium,Non-Asbestos Lining Material  Bonded to the Brake Shoe   Qty. 1, 2 per brake, sold each  Item 14  Normally a Stock Item @ BPI  Ships from Stock to 6 Weeks  Dated 01-2024  (45LBS) H 12" L 20" W 12" Box - 0 $2,192.00 2 AME-E019027 Ametek Gemco Brake Shoe Bolt  Part E019027  For a TM-1985 or ET19 Brake Shoe  Item 16, 2 per brake, sold each  1.25 Inch Dia  10.5 Inch Long  Threaded both ends  1 end has pin hole, Nut for use with pin, 1 pin  Nut is on & pinned  C. F. for Pricing  Dated 01-2024  aka 24D6387G01  (5 LBS) - 0 Call   Call 3 AME-PSD0146500 Ametek Gemco Repair Kit Thruster  Part PSD0146500  Repair - Seal Kit  For Thruster Assemblies:  PSD0151705  PSD0148317  PSD0148305  PSD0165807  PSD0175907  Brakes:  ET8, ET10 ET11 & ET11NA  Item 8A  Ships in 6 to 8 Weeks, Peck MI  Dated 10-2021  (2LBS) H 4" L 6" W 4" Box 0 $6,419.52 GEMCO ET23 Brakes Replacement Parts No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-E023025 Ametek Gemco Brake Shoe & Lining TM23  Part E023025  aka E023025999  Old Part 635C316G01  For a 23 Inch TM-2311 DC Brake  Item 14, 2 per brake, sold each  Premium Bonded, Non-Asbestos Material  Ships in 10 to 11 Weeks, Peck MI  C. F. for Pricing  Dated 01-2024 - 0 Call   Call 2 AME-E023028 Ametek Gemco Brake Shoe Bolt TM-2311  Part E023028  aka E023028002  Hardened Brake Shoe Bolt  For Mounting the Brake Shoes  Includes Bolt Nut & Lockwasher  For a 23 Inch TM-2311 DC Brake  Item 16, 2 per Brake, sold each  Old WEST 24D6387G02  Ships in 4 Weeks  C. F. for Pricing  Dated 01-2024  (12LBS) H 4" L 12" W 4" Box - 0 Call   Call 3 AME-PSD0146500 Ametek Gemco Repair Kit Thruster  Part PSD0146500  Repair - Seal Kit  For Thruster Assemblies:  PSD0151705  PSD0148317  PSD0148305  PSD0165807  PSD0175907  Brakes:  ET8, ET10 ET11 & ET11NA  Item 8A  Ships in 6 to 8 Weeks, Peck MI  Dated 10-2021  (2LBS) H 4" L 6" W 4" Box 0 $6,419.52

Secure Online Order     Secure Online Order   14,354 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.