Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
78,353 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,223 part numbers: Motion Control Products
 
  GLEASON
23,582 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,746 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,312 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,605 part numbers: Motor Mounted Brakes
  HUBBELL
16,262 part numbers: Electrical Control Products
  SUPERBOLT
110 part numbers: Fastening Solutions
  TELEMOTIVE
2,458 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
73 part numbers
 

Brake Products
Amazon Store

 
471 part numbers
 
 
Brake Products is now an authorized distributor of

 
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Gemco Industrial Brakes
 
Magnetic Brakes - Magnetic DC Shoe Brakes (TM Style)
 
DESCRIPTION
 
The magnetic DC shoe brakes are spring set and electrically released. The brake is set when 230 VDC power is removed from the brakes coil(s). The type TM brakes electrical mechanism consists of one or two DC magnets. As power is introduced to the coils it creates an electro-magnetic field that brings the coils together to release the brake. Cutting power to the coils allows the spring to extend back to its normal state and sets the brake. Shunt or series coils are available and rated for continuous or intermittent duty ratings. We also offer single point adjustment on brakes 8 inches in wheel diameter or larger. This speeds up the brake installation and shoe lining wear adjustment by a single point adjusting feature. Brake wheel diameters of 4 1/2" to 30" are available, and are AISE rated. Rectifiers are available for AC operation.
 
Gemco Industrial Brakes stop virtually any type of industrial machine. Applications such as steel mills, indoor and outdoor bridge cranes, gantries, heavy-duty cranes, high-duty cycle cranes, lock and dam projects, stacker reclaimers, and commercial laundry equipment are just some of the uses for Gemco Industrial Brakes. These field proven high performance brake systems were originally designed and built by Westinghouse and Wagner Industrial Brakes. They are tough, reliable and provide extended, trouble free service. That's because they are designed and built to exacting specifications. For more than 40 years, Gemco has been an acknowledged leader in brake system technology for heavy-duty industrial applications.
 
Documentation Download:
Industrial Brake Brochure
Industrial Brake Systems Application Guide
Models CB and TM Magnetic Shoe Brakes Manual
 
CAD Drawings Download
    • TM43 (PDF)
    • TM63 (PDF)
    • TM83 (PDF)
    • TM83 (ZIP, DWG)
    • TM1035 (PDF)
    • TM1355 (PDF)
    • TM1655 (PDF)
    • TM1985 (PDF)
    • TM2311 (PDF)
    • TMSC8 (PDF)
    • TMSC10 (PDF)
    • TMSC13 (PDF)
    • TMSC16 (PDF)
    • TMSCH10 (PDF)
 
GEMCO TM AIST DC Brakes
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-TM-1035 Ametek Gemco Brake Heavy Duty AISE Spring Set Magnetic Release Shoe Brake Assembly Direct Current Clapper Type 10 Inch Wheel Diameter Voltage DC with Shunt or Series Wound Coils With Series Coils 200 Ft. Lbs. 1/2 Hour & 130 Ft Lbs. 1 Hour With Shunt Coils 200 Ft. Lbs. 1 Hour & 150 Ft Lbs 8 Hours A 10 X 3.75 Inch Brake Wheel is not included. Rectifier for AC Voltages are available at additional cost. A new self centering design is available at the same cost = TMSC (165) Dated 7/18 - 0 $5,088.00
2 AME-TM-1355 Ametek Gemco Brake Part TM-1355 Heavy Duty AIST Spring Set Magnetic Release Shoe Brake Assembly Direct Current Clapper Type 13 Inch Wheel Diameter Voltage DC With Shunt or Series Wound Coils Series Coils 550 FT. LBS. 1/2 Hour & 365 FT Lbs. 1 Hour Shunt Coils 550 FT. LBS. 1 Hour & 400 Ft Lbs 8 Hours Brake Weight 290 LBS NET A 13 X 5.75 Inch Brake Wheel is not included This brake is also available to operated via a hydraulic slave cylinder For progressive brake application from a crane cab Rectifier for AC Voltages are available at additional cost A new self centering design is available at the same cost = TMSC Dated 7/18 (352LBS) H 16" L 26.00" W 36.00" 1 $8,931.00
3 AME-TM-1665 Ametek Gemco Brake Part TM-1665 Heavy Duty AIST Spring Set Magnetic Release Shoe Brake Assembly Direct Current Clapper Type 16 Inch Wheel Diameter, Voltage DC with Shunt or Series Wound Coils With Series Coils 1000 Ft. Lbs. 1/2 Hour & 650 Ft Lbs. 1 Hour With Shunt Coils 1000 Ft. Lbs. 1 Hour & 750 Ft Lbs 8 Hours A 16 X 6.75 Inch Brake Wheel is not included Rectifier for AC Voltages are available at additional cost A new self centering design is available at the same cost = TMSC Dated 7/18 Mfg in Peck MI Ships in 5 weeks, Peck MI - 0 $13,254.00
4 AME-TM-1985 Ametek Gemco Heavy Duty DC Brake Model TM-1985 AIST Spring Set Magnetically Released, Shoe Brake Assembly Direct Current Clapper Type Steel Mill Brake For AIST Class D, E & F Overhead Cranes Voltage DC with Shunt or Series Wound Coils, Class "B" Insulation With Series Coils 2000 FT LBS 1/2 Hour & 1300 FT LBS 1 Hour With Shunt Coils 2000 FT LBS 1 Hour & 1500 Ft Lbs 8 Hours A Magnet / Shoe Travel Indicator to facilitates brake adjustment Twin-magnet coils are Epoxy-encapsulated for permanent protection against dust, water, grease, oil, chemicals and mechanical impact Coils can be replaced while the brake continues to set / under load Self Aligning Cast Iron Brake Shoes with Bonded Linings for maximum lining wear. Premium Non-Asbestos High Temperature Brake Lining Material is utilized Options available at additional cost include: A Brake Wheel / Pulley, with a Pilot Bore or with a Finished, Hub Length Bore & Keyway Rectifiers for AC Voltages, with Enclosure or an Open Chassis Design for mounting in your panel Brake Enclosures, Designed to meet NEMA 4 or NEMA 3R ratings A Hand Release Lever, Resistors Dated 1/18 aka E019000001 With Shunt Wound Coils Brake Weight 870 LBS.Net Motor Freight Only (940LBS) H 26" L 42" W 30" Skid / Box - 1 $29,018.00
5 AME-TM-43 Ametek Gemco DC Brake Assembly Part TM-43 DC Magnetic Brake Assembly, Mfg to AIST Standards Heavy Duty Spring Set, Magnetic Release Shoe Brake Assembly Direct Current Clapper Type Brake 4.5 Inch Diameter Provided with a Shunt Wound Coil Part E004051 Designed for 1 or 8 Hour Duty Cycle 80 Volts Intermittent 64 Volts Continuous 25 Ft LBS @ 1 Hour 15 FT LBS @ 8 Hours Options Available some at additional cost include: A Brake Wheel 4.500 X 3.125 / Finished or Pilot Bore Part E004500 Series Wound Coil, same cost AC to DC Rectifiers, Part E010326 with NEMA 4 Enclosure or Part E010326 Open Chassis Design A Manual Hand Release Lever, latching or non-latching NEMA 3 and 4 Brake Enclosures Stock to 5 Weeks to ship Product available at Amazon.com and BrakeProducts.com [Amazon] Dated 7/18 (41LBS) H 15" L 20" W 10" Box 2 $2,418.00
6 AME-TM-63 Ametek Gemco Brake Assembly Model TM-63 DC Magnetic Brake Assembly, Meets the AIST Standards Heavy Duty Spring Set, Magnetic Release Shoe Brake Assembly Direct Current Clapper Type Brake 6.00 Inch Diameter Provided with a Shunt Wound Coil E006026 Designed for 1 or 8 Hour Duty Cycle 80 Volts Intermittent 64 Volts Continuous 50 FT LBS @ 1 Hour 40 FT LBS @ 8 Hours Options Available some at additional cost include: A Brake Wheel 6.00 X 3.125 / Finished or Pilot Bore Series Wound Coil, same cost AC to DC Rectifiers Part E010326 with NEMA 4 Enclosure Part E010326 Open Chassis Design A Manual Hand Release Lever, latching or non-latching NEMA 3 and 4 Brake Enclosures Stock to 4 Weeks to Ship Dated 7/18 (53LBS) H 15" L 20" W 10" Box 2 $2,544.00
7 AME-TM-83 Ametek Gemco Brake DC 8 Inch Heavy Duty AISE Spring Set Magnetic Release Shoe Brake Assembly Direct Current Clapper Type 8 Inch Wheel Diameter Voltage DC with Shunt or Series Wound Coils With Series Coils 100 Ft. Lbs. 1/2 Hour & 65 Ft Lbs. 1 Hour With Shunt Coils 100 Ft. Lbs. 1 Hour & 75 Ft Lbs 8 Hours A 8 X 3.25 Inch Brake Wheel is not included Rectifier for AC Voltages is available at additional cost A new self centering design is available at the same cost = TMSC Dated 7/18 - 0 $4,408.00
GEMCO TMSC AIST DC Brakes
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-TMSC-1035 Ametek Gemco Brake Heavy Duty AIST Spring Set Magnetic Release Shoe Brake Assembly Direct Current Clapper Type 10 Inch Wheel Diameter Voltage DC with Shunt or Series Wound Coils With Series Coils 200 FT. LBS 1/2 Hour & 130 FT LBS. 1 Hour With Shunt Coils 200 FT. LBS. 1 Hour & 150 FT LBS 8 Hours The TMSC Brake has interlocking shoe arms that allow single point adjustment for lining wear A 10 X 3.75 Inch Brake Wheel is not included. This brake is also available to operate via a hydraulic slave cylinder for progressive brake application from a crane cab. A Rectifier for AC Voltages is an available option Dated 7/18 Motor Freight Only (165LBS) H 18" L 20" W 32" Skid 3 $5,088.00
2 AME-TMSC-1355 Ametek Gemco Brake 13 Inch DC Heavy Duty AISE Spring Set Magnetic Release Shoe Brake Assembly Direct Current Clapper Type 13 Inch Wheel Diameter Voltage DC With Shunt or Series Wound Coils Series Coils 550 FT LBS 1/2 Hour & 365 FT LBS 1 Hour Shunt Coils 550 FT LBS 1 Hour & 400 FT LBS 8 Hours The TMSC Brake has interlocking shoe arms that allow single point adjustment for lining wear Brake Weight 290 LBS Gross 350 Dated 7/18 - 0 $8,931.00
3 AME-TMSC-1665 Ametek Gemco Brake Heavy Duty AIST Spring Set Magnetic Release Shoe Brake Assembly Direct Current Clapper Type 16 Inch Wheel Diameter Voltage DC with Shunt or Series Wound Coils With Series Coils 1000 Ft. Lbs. 1/2 Hour & 650 Ft Lbs. 1 Hour With Shunt Coils 1000 Ft. Lbs. 1 Hour & 750 Ft Lbs 8 Hours The TMSC Brake has interlocking shoe arms that allow for a single point adjustment for lining wear (520LBS) Shipping Weight A 16 X 6.75 Inch Brake Wheel is NOT included Rectifier for AC Voltages are available at additional cost Dated 7/18 Motor Freight Only (520LBS) H 24" L 32" W 20" Skid 1 $13,254.00
4 AME-TMSC-83 Ametek Gemco AIST 8 Inch DC Brake Part TMSC-83 Heavy Duty Spring Set Magnetically Released Brake Assembly Direct Current Clapper Type 8 Inch Wheel Diameter Voltage DC with Shunt or Series Wound Coils With Series Coils 100 FT LB 1/2 Hour & 65 FT LB 1 Hour With Shunt Coils 100 FT LB 1 Hour & 75 FT LB 8 Hours A 8 X 3.25 Inch Brake Wheel is not included Rectifier for AC Voltages is available at additional cost [Amazon] Dated 7/18 (110LBS) H 10" L 30" W 20" 3 $4,408.00
5 AME-TMSCH-1355 Ametek Gemco Electric / Hydraulic Brake Part TMSCH-1355 13 Inch Diameter DC Electric Brake Type TMSC With a Hydraulic Actuating Cylinder Brake Assembly Only This Brake is Spring Set and Electrically Released When electrically released the Hydraulic Actuator becomes usable via a hydraulic brake system which is not included Voltage DC with Shunt Coils 550 Ft LBS 1 Hour & 400 FT LBS 8 Hours Hydraulic Operation 550 FT LBS Maximum Brake Weight 290 LBS. plus skid A Brake Wheel is not included Ships from stock to 6 weeks Dated 7/18 1 $12,748.00
6 AME-TMSCH-1355 SYSTEM Ametek Gemco Electric / Hydraulic Brake System Part TMSCH-1355 System 13 Inch Diameter DC Electric Brake type TMSC with a Hydraulic Actuating Cylinder This Brake is Spring Set and Electrically Released, when electrically released the Hydraulic Actuator becomes usable by the hydraulic foot pedal System to include the Brake TMSC-1355 Fluid Reservoir / Bleeder Bleeder Pushbutton Switch J01008 Control Cylinder J017616 with Pedal J008219 4 Armored Hose Kits J010797 Hydraulic Tubing by 100 Feet Hydraulic Fittings, Gaskets, Brackets & Wagner Super Heavy Duty Brake Fluid Voltage DC with Shunt Wound Coils 550 Ft LBS 1 Hour & 400 FT LBS 8 Hours 550 Ft LBS via Hydraulic Operation Brake Weight 260 LBS., plus system components & shipping skid A Brake Wheel is not included Ships in 6 weeks, Peck MI Dated 7/18 - 0 $18,557.00
7 AME-TMSCH-1665 Ametek Gemco Electric / Hydraulic Brake 16 Inch Diameter DC Electric Brake Type TMSC Part TMSCH-1665 With a Hydraulic Actuating Cylinder Brake Assembly Only This Brake is Spring Set and Electrically Released When electrically released the Hydraulic Actuator becomes usable via a hydraulic brake system which is not included Voltage DC with Shunt Coils 1000 Ft LBS 1 Hour & 750 FT LBS 8 Hours Brake Weight 500 LBS. plus skid A Brake Wheel is not included Ships in 6 weeks, Peck MI Dated 7/18 - 0 $17,072.00
8 AME-TMSCH-83 Ametek Gemco Electric / Hydraulic Brake 8 Inch Diameter DC Electric Brake Type TMSC Part TMSCH-83 With a Hydraulic Actuating Cylinder Brake Assembly Only This Brake is Spring Set and Electrically Released When electrically released the Hydraulic Actuator becomes usable via a hydraulic brake system which is not included Voltage DC with Shunt Coils 100 Ft LBS 1 Hour & 75 FT LBS 8 Hours Brake Weight 155 LBS. plus skid A Brake Wheel is not included Ships in 6 weeks, Peck MI Dated 7/18 (200 LBS) H 36" L 36" W 36" - 0 $8,418.00
9 AME-TMSCH-83 SYSTEM Ametek Gemco Electric / Hydraulic Brake System Part TMSCH-83 System 8 Inch Diameter DC Electric Brake type TMSC with a Hydraulic Actuating Cylinder This Brake is Spring Set and Electrically Released, when electrically released the Hydraulic Actuator becomes usable by the hydraulic foot pedal System to include the Brake TMSC-83 Fluid Reservoir / Bleeder Bleeder Pushbutton Switch J01008 Control Cylinder J017616 with Pedal J008219 4 Armored Hose Kits J010797 Hydraulic Tubing by 100 Feet Hydraulic Fittings, Gaskets, Brackets & Wagner Super Heavy Duty Brake Fluid Voltage DC with Shunt Wound Coils 100 Ft LBS 1 Hour & 75 FT LBS 8 Hours Brake Weight XX LBS., plus system components & shipping skid A Brake Wheel is not included Ships in 6 weeks, Peck MI Dated 7/18 - 0 $14,228.00
GEMCO TM AIST DC Brakes Brake Wheels
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E004500 Ametek Gemco Brake Wheel 4.5 Inch Part E004500 For the TM-43 DC Brake Assembly With the Offset Style Hub 4.50 Inch Wheel Diameter 3.13 Inch Face Width 2.62 Inch Hub Offset 2.00 Inch Hub Length Through Bore 2.75 Inch Hub Diameter Solid Hub with Bore Center Drilled 1.625 Inch Maximum Recommended Bore 9850 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 [Amazon] (6LBS) H 5" L 5" W 5" Box 8 $797.94
2 AME-E004600 Ametek Gemco Brake Wheel 4.5 Inch - 3 $1,143.00
3 AME-E006500 Ametek Gemco Brake Wheel 6 Inch For the TM-63 DC Brake Assembly And ET-6NA Thruster Brake With the Offset Style Hub, Stock Bore 6.00 Inch Brake Wheel Diameter 3.13 Inch Face Width 3.00 Inch Hub Offset 3.50 Inch Hub Length Through Bore 3.25 Inch Hub Diameter Solid Hub with Bore Center Drilled 2.00 Inch Maximum Recommended Bore 7375 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 Part AME-E006500 aka 834D992H15 (16LBS) H 5" L 6" W 6" Box [Amazon] 0 $684.00
4 AME-E008500 Ametek Gemco Brake Wheel 8 Inch For the TM-83 DC Brake Assembly And ET-8 Thruster Brake With the Offset Style Hub, Stock Bore 8.02 Inch Brake Wheel Diameter 3.25 Inch Face Width 3.00 Inch Hub Offset 3.50 Inch Hub Length Through Bore 3.25 Inch Hub Diameter Solid Hub with Bore Center Drilled 2.25 Inch Maximum Recommended Bore 5525 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 Part AME-E008500 (25LBS) H 6" L 8" W 8" Box [Amazon] - 1 $957.92
5 AME-E008501 Ametek Gemco Brake Wheel. 8 Inch Diameter Brake Wheel with a Finished Bore and Keyway for a 603, 604, 803 & 804 Mill Motor - 0 $1,449.00
6 AME-E008514 Ametek Gemco Brake Wheel. 8 Inch Diameter Brake Wheel with a Finished Bore and Keyway for a 402, 602 0r 802 Mill Motor - 0 $1,301.00
7 AME-E008515 Ametek Gemco Brake Wheel. 8 Inch Diameter,3.25 Face Width, 4.25 Inch Offset, 1.875 Bore with a 1/2 X 1/4 Keyway - 0 $1,301.00
8 AME-E010500 Ametek Gemco Brake Wheel 10 Inch For the TM-1035 DC Brake Assembly Part AME-E010500 And ET-10 Thruster Brake With the Offset Style Hub, Stock Bore 10.02 Inch Brake Wheel Diameter 3.75 Inch Face Width 4.25 Inch Hub Offset 4.25 Inch Hub Length Through Bore 3.75 Inch Hub Diameter Solid Hub with Bore Center Drilled 2.75 Inch Maximum Recommended Bore 4425 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 [Amazon] (40LBS) H 6" L 10" W 10" Box - 1 $1,367.89
9 AME-E010535 Ametek Gemco Brake Wheel. 10 Inch Diameter Brake Wheel with a Finished Bore and Keyway for a 606 & 806 Mill Motor Dated 1/18 - 0 $2,151.00
10 AME-E013500 Ametek Gemco Brake Wheel 13 Inch Part E013500 For the TM-1355 & ET-13 Brakes With the Offset Style Hub And a Pilot Bore 13.02 Inch Brake Wheel Diameter 5.75 Inch Face Width 4.25 Inch Hub Offset 5.38 Inch Hub Length Through Bore 5.75 Inch Hub Diameter Solid Hub with Bore Center Drilled 3.75 Inch Maximum Recommended Bore 3400 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 [Amazon] Dated 1/18 Ships in 4 weeks, Peck MI (95LBS) H 9" L 13" W 13" Box - 1 $2,338.00
11 AME-E013513 Ametek Gemco Brake Wheel Part E013513 13 Inch Diameter with a Hub Length Bore & Keyway for an 808 Mill Motor With the AIST Standard Offset Ships in 4 weeks, Peck MI Dated 1/18 (95LBS) H 9" L 13" W 13" Box - 0 $2,880.00
12 AME-E013520 Ametek Gemco Brake Wheel Part E013520 13 Inch Diameter with a hub length bore & keyway for a 612 & 812 Mill Motor With the AIST Standard Offset Dated 1/18 UPS able Ships in 4 weeks, Peck MI - 0 $2,880.00
13 AME-E013543 Ametek Gemco Brake Wheel Part E013543 13 Inch Diameter Brake Wheel With a Hub Length Bore & Keyway for: 603 604 803 & 804 Mill Motors Dated 1/18 Ships in 4 weeks, Peck MI - 0 $2,880.00
14 AME-E013544 Ametek Gemco Brake Wheel Part E013544 13 Inch Diameter Brake Wheel With a Hub Length Bore & Keyway for: 606 & 806 Mill Motors Dated 1/18 Ships in 4 weeks, Peck MI - 0 $2,880.00
15 AME-E016500 Ametek Gemco Brake Wheel 16 Inch For the TM-1655 DC Brake Assembly And ET-16 Thruster Brake With the Offset Style Hub, Stock Bore 16.02 Inch Brake Wheel Diameter 6.75 Inch Face Width 6.50 Inch Hub Offset 5.50 Inch Hub Length Through Bore 7.00 Inch Hub Diameter Solid Hub with Bore Center Drilled 4.50 Inch Maximum Recommended Bore 2750 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 Part AME-E016500 aka 7937A40H01 (150LBS) H 10" L 16" W 16" Box on Skid Motor Freight Only [Amazon] - 1 $3,398.05
16 AME-E016506 Ametek Gemco Brake Wheel 16 Inch Diameter with a hub length bore & keyway for a 612 & 812 Mill Motor with the AISE Standard Offset - 0 $4,149.99
17 AME-E016513 Ametek Gemco Brake Wheel 16 Inch Diameter with a hub length bore & keyway for a 606 & 806 Mill Motor with the AISE Standard Offset - 0 $4,149.99
18 AME-E016526 Ametek Gemco Brake Wheel 16 Inch Diameter with a hub length bore & keyway for a 608 & 808 Mill Motor with the AISE Standard Offset - 0 $4,149.99
19 AME-E016528 Ametek Gemco Brake Wheel 16 Inch Diameter with a hub length bore & keyway for a 614 & 814 Mill Motor with the AISE Standard Offset - 0 $4,149.99
20 AME-E016538-002 Ametek Gemco Brake Wheel, 16 Inch Diameter with a finished bore & keyway - 0 $4,149.99
21 AME-E019500 Ametek Gemco Brake Wheel 19 Inch For the TM-1955 DC Brake Assembly And ET-19 Thruster Brake With the Offset Style Hub, Stock Bore 19.02 Inch Brake Wheel Diameter 8.75 Inch Face Width 7.50 Inch Hub Offset 6.00 Inch Hub Length Through Bore 7.00 Inch Hub Diameter Solid Hub with Bore Center Drilled 4.625 Inch Maximum Recommended Bore 2350 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 Part AME-E019500 (250LBS) H 12" L 19" W 19" Box on Skid, Motor Freight Only [Amazon] - 1 $5,005.60
22 AME-E023500 Ametek Gemco Brake Wheel 23 Inch For the TM-2375 DC Brake Assembly With the Offset Style Hub, Stock Bore 23.02 Inch Brake Wheel Diameter 11.25 Inch Brake Face Width 8.75 Inch Hub Offset from Centerline 7.31 Inch Hub Length Through Bore 8.50 Inch Hub Diameter Solid Hub with Bore Center Drilled 5.50 Inch Maximum Recommended Bore 1925 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 Part AME-E023500 (450LBS) H 12" L 23" W 23" Box on Skid, Motor Freight Only [Amazon] - 1 $8,570.75
23 AME-E030500 Ametek Gemco Brake Wheel 30 Inch For the TM-3014 DC Brake Assembly With the Offset Style Hub, Stock Bore 30.04 Inch Brake Wheel Diameter 14.25 Inch Brake Face Width 10.75 Inch Hub Offset from Centerline 9.25 Inch Hub Length Through Bore 13.00 Inch Hub Diameter Solid Hub with Bore Center Drilled 7.50 Inch Maximum Recommended Bore 1475 Maximum RPM Cast from ASTM A 536 Ductile Iron 80-60-03 or 80-55-06 Part AME-E030500 (850LBS) H 19" L 30" W 30" Box on Skid, Motor Freight Only [Amazon] - 1 $14,284.57
GEMCO TM AIST DC Brakes Brake Shoes, Linings, Bolts and Pins
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E004047 Ametek Gemco Brake Shoe Assembly Part E004047 Brake Shoe & Lining For a TM-43 4.5 Inch Electric Brake Bonded Premium Non-Asbestos Lining Material 2 Per brake, sold each 70 Degree Arc aka 645C555G02 E004047002 Dated 7/18 (2LBS) H 4" L 5" W 4" Box - 4 $539.00
2 AME-E004070 Ametek Gemco Bolt Part E004070 Hardened Brake Shoe Bolt For a TM-43 or TM-63 DC Brake aka 27D7221H04 E004070006 Item 15, 2 per brake, sold each Dated 7/18 (1LB) - 0 $171.00
3 AME-E006023 Ametek Gemco Brake Shoe & Lining Assembly Part E006023 For 6 Inch a TM-63, ET6 or ET6NA Brake Bonded Premium Non-Asbestos Lining Material Sold each, 2 per Brake 70 Degree Arc aka 645C162G02 Shoe Casting # 645C162J04, E006023002 [Amazon] Dated 7/18 (2LBS) H 4" L 10" W 4" Box 4 $579.00
4 AME-E008025 Ametek Gemco Brake Shoe Assembly Part E008025 aka E008025002 Brake Shoe & Lining Assembly For an 8 Inch TM-83 or ET-8 Brake Item 14, 2 per brake, sold each Premium Bonded, Non-Asbestos Material Old 439C314G01 [Amazon] Dated 7/18 (3LBS) H 4" L 8" W 4" Box 0 $632.00
5 AME-E010047 Ametek Gemco Brake Shoe Assembly Part E010047 For a 10 Inch TM-1035 or ET-10 Brake Item 14 2 per brake, sold each Premium OEM Non-Asbestos Bonded Lining Material aka 635C292G01 E0100470002 [Amazon] Dated 7/18 (5LBS) H 4" L 10" W 4" Box 0 $761.00
6 AME-E010107 Ametek Gemco Shoe & Lining Outer Brake Shoe For a CB-160 10 Inch Electric Brake Bonded Premium Non-Asbestos Lining Material aka 2254C27G04 (15LBS) - 1 $1,200.00
7 AME-E010108 Ametek Gemco Lining & Rivet Kit For a CB-160 Solenoid Brake 10 Inch Premium OEM Non-Asbestos Drilled Linings Qty. 2, with 6 Drilled and Countersunk Holes & 18 Brass Push Pins Linings for 2 Brake Shoes / 1 Pair aka 3279B95G04 (1LB) - 3 $254.00
8 AME-E013025 Ametek Gemco Brake Shoe & Lining Part E013025 For a 13 Inch TM1355 or ET13 Brake Item 14, 2 per brake, sold each Bonded, Premium Non-Asbestos Lining Material Old 439C201G01 aka E013025002 Normally a stock item @ BPI Dated 7/18 (12LBS) H 8" L 12" W 8" Box - 1 $916.00
9 AME-E013053 Ametek Gemco Bolt Part E013053 Hardened Brake Shoe Bolt Assembly For 13 Inch TM-1355 DC Brake Item 16, 2 per brake, sold each Old 24D6387G04 aka E013053006 Dated 1/18 - 2 $251.00
10 AME-E016025 Ametek Gemco Brake Shoe Assembly Part E016025 For a 16 Inch TM-1665 or ET-16 Brake Premium Non-Asbestos Material Bonded to the Brake Shoe Item 14, 2 per brake, sold each aka 635C227G01 [Amazon] Dated 7/18 (31LBS) H 12" L 10" W 12" Box 0 $1,218.00
11 AME-E016027 Ametek Gemco Bolt. Brake shoe Bolt on a TM1655 & ET-16 Brake.Includes Bolt, Nut & Pin. Ref item 16. 2 per brake, 24D6387G03 (2LBS) - 0 $258.00
12 AME-E019024 Ametek Gemco Brake Shoe Assembly Part E019024 Brake Shoe & Lining Assembly For a 19 Inch TM-1985 or ET-19 Brake Premium,Non-Asbestos Lining Material Bonded to the Brake Shoe Qty. 1, 2 per brake, sold each Item 14 aka 439C394G01 (45LBS) 7/18 - 0 $1,575.00
13 AME-E019027 Ametek Gemco Brake Shoe Bolt Part E019027 For a TM-1985 or ET19 Brake Shoe Item 16, 2 per brake, sold each 1.25 Inch Dia 10.5 Inch Long Threaded both ends 1 end has pin hole, Nut for use with pin, 1 pin Nut is on & pinned Dated 7/18 aka 24D6387G01 (5 LBS) - 0 $367.00
14 AME-E019065 Ametek Gemco Linings Part E019065 For a 19 Inch TM-1985 DC Brake Pair of Drilled & Countersunk Linings Includes 26 Rivets, 24 Required Also available undrilled for bonded brake shoes MSDS Sheets Available Premium Non Asbestos Material aka E019065005 aka Old West 861C691G20 [Amazon] Dated (8LBS) H 4" L 10" W 4" Box 0 $561.00
15 AME-E023025 Ametek Gemco Brake Shoe & Lining Part E023025 For a 23 Inch TM-2311 DC Brake Item 14, 2 per brake, sold each Premium Bonded, Non-Asbestos Material aka 635C316G01 Dated 7/18 - 0 $2,441.00
16 AME-E023028 Ametek Gemco Brake Shoe Bolt Part E023028 Hardened Brake Shoe Bolt For Mounting Brake Shoes Includes Bolt Nut & Lockwasher For a 23 Inch TM-2311 DC Brake Item 16, 2 per Brake, sold each aka 24D6387G02 & E023028002 Dated 1/16 Ships in (12LBS) H 4" L 12" W 4" Box - 0 $518.00
17 AME-E030040 Ametek Gemco Bolt, Hardened Brake Shoe Bolt Assembly for a TM-3014 30 Inch Brake. Includes the Hex Nut. Ref. # 16, 2 per brake but sold individually, 450A869G01 1/11 - 0 $549.00
 
Ametek Gemco Magnetic DC Shoe Brakes (TM Style) Replacement Parts
 
Ametek Gemco Solenoid DC Shoe Brakes (TM Style Brakes, DC Heavy Duty AISE Spring Set Magnetic Release Shoe Brakes):
 
  • TM43 Brake Assembly & Parts
  • TM63 Brake Assembly & Parts
  • TM83 Brake Assembly & Parts
  • TM1035 Brake Assembly & Parts
  • TM1355 Brake Assembly & Parts
  • TM1655 Brake Assembly & Parts
  • TM1985 Brake Assembly & Parts
  • TM2311 Brake Assembly & Parts
  • TM3014 Brake Assembly & Parts
 
 
Secure Online Order
 

 
Secure Online Order
 
14,223 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate

Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 RLS
  • 2006 RLS
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
  • ECPT10 Pressure Transducer
  • PST360 Pressure Transducer
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985