Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
3,083 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,105 part numbers: Motion Control Products
 
  GLEASON
23,196 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,720 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,284 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,503 part numbers: Motor Mounted Brakes
  HUBBELL
16,198 part numbers: Electrical Control Products
  SUPERBOLT
119 part numbers: Fastening Solutions
  TELEMOTIVE
2,423 part numbers: Radio Remote Control
  RENOLD
399 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
732 part numbers
 

Gemco Direct
Amazon Store

 
5,979 part numbers
 

Gleason Direct
Amazon Store

 
1,039 part numbers
 

Telemotive Direct
Amazon Store

 
19 part numbers
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Gemco Industrial Brakes
Electro-Thrust Brakes - Electro-Thrust Shoe Brakes (ET Style)

 
DESCRIPTION
 
The Electro-Thrust Shoe Brakes have been in service for over 10 years. AISE sizes range from 8 inches in diameter up to 30 inch diameter wheels. Torque values range from 100 foot-pounds to 9,000 ft./lbs.! We also manufacture a line of non-AISE rated brakes. The brakes are spring set for fail-safe operation with an electro-hydraulic actuator that overcomes a setting spring and releases the brake. The actuator is stroked by means of applying power, either AC or DC, to an integral motor attached to a twin cavity housing. The housing is filled with fluid and as the motor spins it creates fluid motion. As the fluid travels through the housing it applies upward pressure to a piston that overcomes the setting spring to release the brake. Cutting power to the motor reverses this function and the spring then gently sets the brake.
 
The Series ET style of shoe brakes are spring set and electrically released by a continuously rated, sealed electrohydraulic actuator. This brake provides smooth brake setting due to the response of the actuator. This inherent cushion effect is desirable for many brake applications. Rugged construction makes this brake suitable for steel mill cranes, container cranes, stacker reclaimers, lock and dam gates, and other heavy-duty applications.
 
Documentation Download:
Industrial Brake Brochure
Industrial Brake Systems Application Guide
Electro Thrust (Model ET) Shoe Brakes Manual
 
CAD Drawings Download:
  • ET6NA (PDF)
  • ET8 (DXF, ZIP)
  • ET8 (PDF)
  • ET8NA (PDF)
  • ET10 (PDF)
  • ET11NA (PDF)
  • ET13 (PDF)
  • ET13, Certified (PDF)
ET14NA (PDF)
ET16 (PDF)
ET18NA (PDF)
ET19 (PDF)
ETH8NA (PDF)
ETH10 (PDF)
ETH14NA (PDF)
ETH14NA, Certified (PDF)
 
GEMCO ET Electro-Thrust Shoe Brakes
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-ET-6NA Ametek Gemco Electro-Thrust Brake Assembly ET-6NA 
6 Inch Diameter Brake 
60 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 1.1 Seconds 
With Adjustable Valve 1.5 to 7.2 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 6 X 3.125, Finished or Pilot Bore Part E006500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
120 LBS Net, 150 LBS Gross 
Ships via Motor Freight Only 1/17
- 1 $3,955.00
2 AME-ET-8 Ametek Gemco Electro-Thrust Brake Assembly ET-8 
8 Inch Diameter Brake 
Manufactured to AIST Specifications 
100 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 1.1 Seconds 
With Adjustable Valve 1.5 to 7.2 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
140 LBS Net, 170 LBS Gross 
Ships via Motor Freight Only 1/17
- 1 $4,305.00
3 AME-ET-8DC Ametek Gemco Electro-Thrust Brake Assembly ET-8DC 
Manufactured to AIST Specifications 
8 Inch Diameter Brake 
100 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 1.1 Seconds 
With Adjustable Valve 1.5 to 7.2 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
140 LBS Net, 170 LBS Gross 
Ships via Motor Freight Only
- 0 $6,990.99
4 AME-ET-8NA Ametek Gemco Electro-Thrust Brake Assembly ET-8NA 
8 Inch Diameter Brake 
160 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 1.1 Seconds 
With Adjustable Valve 1.5 to 7.2 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
140 LBS Net, 170 LBS Gross 
Ships via Motor Freight Only 1/17
- 0 $4,305.00
5 AME-ET-10 Ametek Gemco Electro-Thrust Brake Assembly ET-10 
10 Inch Diameter Brake 
Manufactured to AIST Specifications 
200 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.3 to 7.3 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 10 X 3.75 Inch, Finished or Pilot Bore Part E010500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
150 LBS Net, 180 LBS Gross 
Ships via Motor Freight Only 1/17
- 0 $5,246.00
6 AME-ET-11NA Ametek Gemco Electro-Thrust Brake Assembly ET-11NA 
11 Inch Diameter Brake 
400 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.3 to 7.3 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 11 X 5.00 Inch, Finished or Pilot Bore Part E011500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
170 LBS Net, 200 LBS Gross 
Ships via Motor Freight Only 1/17
- 0 $6,203.00
7 AME-ET-13 Ametek Gemco Electro-Thrust Brake Assembly ET-13 
13 Inch Diameter Brake 
Manufactured to AIST Specifications 
550 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.2 to 4.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 13 X 5.75 Inch, Finished or Pilot Bore Part E013500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
Ships in 5 to 6 weeks 
250 LBS Net, 280 LBS Gross 
Ships via Motor Freight Only 1/17
- 0 $7,052.00
8 AME-ET-13DC Ametek Gemco Electro-Thrust Brake Assembly ET-13 
13 Inch Diameter Brake 
Manufactured to AIST Specifications 
550 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.2 to 4.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 13 X 5.75 Inch, Finished or Pilot Bore Part E013500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
250 LBS Net, 280 LBS Gross 
Ships via Motor Freight Only
- 0 $9,308.99
9 AME-ET-14NA Ametek Gemco Electro-Thrust Brake Assembly ET-14NA 
14 Inch Diameter Brake 
800 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.2 to 4.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 14 X 4.25 Inch, Finished or Pilot Bore Part E014500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
320 LBS Net, 370 LBS Gross 
Ships via Motor Freight Only 1/17
- 2 $8,971.00
10 AME-ET-14NA DC Ametek Gemco Electro-Thrust Brake Assembly ET-14NADC 
14 Inch Diameter Brake 
800 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.2 to 4.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 14 X 4.25 Inch, Finished or Pilot Bore Part E014500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
320 LBS Net, 370 LBS Gross 
Ships via Motor Freight Only
- 0 $11,117.98
11 AME-ET-16 Ametek Gemco Electro-Thrust Brake Assembly ET-16 
16 Inch Diameter Brake 
Manufactured to AIST Specifications 
1000 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.45 Seconds 
With Adjustable Valve 0.8 to 3.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
400 LBS Net, 430 LBS Gross 
Ships via Motor Freight Only 1/17
- 0 $9,687.00
12 AME-ET-16DC Ametek Gemco Electro-Thrust Brake Assembly ET-16 
16 Inch Diameter Brake 
Manufactured to AIST Specifications 
1000 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.45 Seconds 
With Adjustable Valve 0.8 to 3.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
400 LBS Net, 430 LBS Gross 
Ships via Motor Freight Only
- 0 $11,792.98
13 AME-ET-18NA Ametek Gemco Electro-Thrust Brake Assembly ET-18NA 
18 Inch Diameter Brake 
1500 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.35 Seconds 
With Adjustable Valve 0.7 to 3.0 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
580 LBS Net, 610 LBS Gross 
Ships via Motor Freight Only 1/17
- 0 $12,128.00
14 AME-ET-18NA DC Ametek Gemco Electro-Thrust Brake Assembly ET-18NADC 
18 Inch Diameter Brake 
1500 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.35 Seconds 
With Adjustable Valve 0.7 to 3.0 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
580 LBS Net, 610 LBS Gross 
Ships via Motor Freight Only
- 0 $14,093.98
15 AME-ET-19 Ametek Gemco Electro-Thrust Brake Assembly ET-19 
19 Inch Diameter Brake 
Manufactured to AIST Specifications 
2000 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.35 Seconds 
With Adjustable Valve 0.7 to 3.0 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
640 LBS Net, 670 LBS Gross 
Ships via Motor Freight Only
- 0 $14,144.00
16 AME-ET-19NA Ametek Gemco Electro-Thrust Brake Assembly ET-19NA 
19 Inch Diameter Brake 
1600 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC is required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.35 Seconds 
With Adjustable Valve 0.7 to 3.0 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
640 LBS Net, 670 LBS Gross 
Ships via Motor Freight Only
- 0 $13,866.98
GEMCO ETH Electro-Thrust Shoe Brakes
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-ETH-08 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 100 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $6,628.99
2 AME-ETH-08NA-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 160 LB FT, 230 Volt DC Motor, Built to AISE Specifications with the exception of the brake torque which is 60 FT LB higher than AISE specifies, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 1.1 Sec. With Adjusting Valve 1.5 to 7.2 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application (165LBS) Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $8,707.99
3 AME-ETH-08NA-DC SYSTEM Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $13,759.98
4 AME-ETH-08NA BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 160 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $6,628.99
5 AME-ETH-10-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 200 LB FT, 230 Volt DC Motor, Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # 82300014 (165LBS) - 0 $9,699.99
6 AME-ETH-10 1 BRKSYS AC Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 200 Ft LB, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. System includes: Qty. 1, ETH-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $12,219.98
7 AME-ETH-10 2 BRKSYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $24,823.96
8 AME-ETH-10 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake, 200 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 150 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $7,240.99
9 AME-ETH-10 BRAKE SYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $14,678.98
10 AME-ETH-11 BRAKE ONLY 400 FT LBS - 0 $8,207.99
11 AME-ETH-13 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $9,069.99
12 AME-ETH-13 BRAKE ONLY DC Ametek Gemco spring applied, electro-hydraulically released, 13 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 230 Volt DC Shunt Wound Motor.550 FT LBS. - 0 $11,528.98
13 AME-ETH-13 BRAKE SYS Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters. System includes: Qty. 1, ET-13H Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $13,793.98
14 AME-ETH-13 BRAKE SYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 13 Inch Diameter Brake, 550 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-13 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $16,252.98
15 AME-ETH-14NA Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). The thruster includes a 230VDC motor. The brake is set up for a 14" diameter wheel which is not included. Two 10797 armored hose kits are included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included - 0 $10,919.98
16 AME-ETH-14NA-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 14 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 800 LB FT, 230 Volt DC Motor, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.45 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # (300LBS) - 0 $13,378.98
17 AME-ETH-14NA BO Ametek Gemco spring applied, electro-hydraulically released, 14 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 460 / 230 Volt AC motor. 800 FT LBS. - 0 $10,928.98
18 AME-ETH-16 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters 01/11 - 0 $10,099.98
19 AME-ETH-16 BRAKE ONLY DC Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake.The thruster includes a 230VDC motor. The brake is set up for a 16" diameter wheel which is not included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included. - 0 $12,122.98
20 AME-ETH-16 BRAKE SYS DC Ametek Gemco spring applied, electro-hydraulically released brake system with hydraulic actuator for auxiliary manual cab control via foot pedal. 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake. The thruster includes a 230VDC Shunt Wound Motor. The brake is set up for a 16" diameter wheel which is not included. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 
- 0 $18,506.97
21 AME-ETH-16 BRAKE SYSTEM AC Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $16,513.98
GEMCO ET/ETH Brakes Brake Shoes, Linings, Bolts and Pins
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E004047 Ametek Gemco Brake Part Electric 
Brake Shoe & Lining 
For a TM-43 4.5 Inch Electric Brake 
Bonded Premium Non-Asbestos Lining Material 
2 Per brake, sold each 
70 Degree Arc 
aka 645C555G02 
(2LBS) H 4" L 5" W 4" B
- 0 $479.00
2 AME-E004070 Ametek Gemco Bolt 
Hardened Brake Shoe Bolt 
For a TM-43 or TM-63 DC Brake 
aka 27D7221H04 
Item 15, 2 per brake, sold each
- 0 $152.00
3 AME-E006023 Ametek Gemco Brake Part TM-63 
Brake Shoe & Lining Assembly 
Part AME-E006023 
For 6 Inch a TM-63, ET6 or ET6NA DC Brake 
Bonded Premium Non-Asbestos Lining Material 
Sold each, 2 per Brake 
70 Degree Arc 
aka 645C162G02 Shoe Casting # 645C162J04 
[Amazon] 
(2LBS) H 4" L 10" W 4" Box
0 $514.00
4 AME-E008025 Ametek Gemco Brake Part TM 8 8030 
Brake Shoe & Lining 
Part AME-E008025 
For a TM-83 or ET-8, 8 Inch Brake 
2 per brake, sold each 
Item 14 
Premium Bonded, OEM, Non-Asbestos Material 
aka 439C314G01 
[Amazon] 
(3LBS) H 4" L 8" W 4" Box
0 $584.00
5 AME-E010047 Ametek Gemco Brake Shoe Assembly 
For a TM-1035 or ET-10, 10 Inch Diameter Electric Brake 
Part AME-E010047 
Item 14 
2 per brake, sold each 
Premium OEM Non-Asbestos Bonded Lining Material 
aka 635C292G01  
[Amazon] 
(5LBS) H 4" L 10" W 4" Box
0 $677.00
6 AME-E010107 Ametek Gemco Shoe & Lining 
Outer Brake Shoe 
For a CB-160 10 Inch Electric Brake 
Bonded Premium Non-Asbestos Lining Material  
aka 2254C27G04 
(15LBS)
- 0 $1,200.00
7 AME-E010108 Ametek Gemco Lining & Rivet Kit 
For a CB-160 Solenoid Brake 10 Inch 
Premium OEM Non-Asbestos Drilled Linings 
Qty. 2, with 6 Drilled and Countersunk Holes & 18 Brass Push Pins 
Linings for 2 Brake Shoes / 1 Pair 
aka 3279B95G04 
(1LB)
- 3 $254.00
8 AME-E013025 Ametek Gemco Brake Shoe & Lining 
For a TM1355 or ET13 
13 Inch Diameter Electric Brake  
Item 14 
Qty. 1, 2 per brake but sold each 
Bonded, Premium Non-Asbestos Lining Material 
aka 439C201G01 
(12LBS) H 8" L 12" W 8" Box
- 0 $814.00
9 AME-E013053 Ametek Gemco Bolt 
Hardened Brake Shoe Bolt Assembly 
For TM-1355 DC Brake 
Item 16 
2 per brake, sold each 
aka 24D6387G04
- 2 $235.00
10 AME-E016025 Ametek Gemco Brake Shoe Assembly 
Part AME-E016025 
For a 16 Inch TM-1665 or ET-16 Brake 
Premium Non-Asbestos Material Bonded to the Brake Shoe 
Item 14, 2 per brake, sold each 
aka 635C227G01 
[Amazon] 
(31LBS) H 12" L 10" W 12" Box
0 $1,083.00
11 AME-E016027 Ametek Gemco Bolt. Brake shoe Bolt on a TM1655 & ET-16 Brake.Includes Bolt, Nut & Pin. Ref item 16. 2 per brake, 24D6387G03 (2LBS) 
- 0 $258.00
12 AME-E019024 Ametek Gemco Brake Parts 19 Inch 
Brake Shoe & Lining Assembly 
For a 19 Inch TM-1985 or ET-19 Brake 
Premium,Non-Asbestos Lining Material 
Bonded to the Brake Shoe  
Qty. 1, 2 per brake, sold each 
Item 14 
aka 439C394G01 
(45LBS) 1/17
- 2 $1,456.00
13 AME-E019027 Ametek Gemco Brake Shoe Bolt 
For a TM-1985 or ET19 Brake Shoe 
Item # 16, 2 per brake, sold each 
1.25" Dia. X 10.5" L Rod threaded both ends 1 end has pin hole, Nut for use with pin, 1 pin. Nut is on & pinned 
aka 24D6387G01 (5 LBS)
- 0 $367.00
14 AME-E019065 Ametek Gemco Brake Part TM-19 
For a 19 Inch TM-1985 DC Brake 
Pair of Drilled & Countersunk Linings 
Includes 26 Rivets, 24 Required  
Also available undrilled for bonded brake shoes 
MSDS Sheets Available 
Premium Non Asbestos Material 
Part AME-E019065  
aka AME-E019065005 
aka old 861C691G20 Westinghouse 
(8LBS) H 4" L 10" W 4" Box 
[Amazon]
2 $561.00
15 AME-E023025 Ametek Gemco Brake Shoe & Lining 
For a 13 Inch TM-2311 DC Brake 
Item 14, 2 per brake, sold each 
Premium Bonded, Non-Asbestos Material 
aka 635C316G01 
1/16
- 0 $2,441.00
16 AME-E023028 Ametek Gemco Brake Part TM DC Brakes 
Hardened Brake Shoe Bolt 
For Mounting Brake Shoes 
Includes Bolt Nut & Lockwasher 
For a 23 Inch TM-2311 DC Brake 
Item 16, 2 per Brake, sold each 
aka 24D6387G02 & E023028002 
(12LBS) H 4" L 12" W 4" Box 
1/16
- 0 $518.00
17 AME-E030040 Ametek Gemco Bolt, Hardened Brake Shoe Bolt Assembly for a TM-3014 30 Inch Brake. Includes the Hex Nut. Ref. # 16, 2 per brake but sold individually, 450A869G01 1/11 - 0 $549.00
 
GEMCO ET Brakes Replacement Parts
 

GEMCO ET8 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E008025 Ametek Gemco Brake Part TM 8 8030 
Brake Shoe & Lining 
Part AME-E008025 
For a TM-83 or ET-8, 8 Inch Brake 
2 per brake, sold each 
Item 14 
Premium Bonded, OEM, Non-Asbestos Material 
aka 439C314G01 
[Amazon] 
(3LBS) H 4" L 8" W 4" Box
0 $584.00
2 AME-E010070 Ametek Gemco Bolt. Brake Shoe Bolt Assembly 
Hardened Bolt with Nut, Lockwasher & Cotter Pin 
For a TM-83, TM-1035 & ET-10 Brake 
2 per brake, sold each 
aka 27D7221H14
- 2 $156.00
3 AME-PSD0146500 Ametek Gemco Repair Kit 
Repair / Seal Kit for a PSD0151705, PSD0148317, PSD0148305 & PSD0175907 
Thruster Assembly. Item 8A 
Seals 04582153 , O'Rings & Bearings, ET8, ET10 / ET-11 1/16 
(2LBS) H 4.00" L 5.00" W 4.00" 
[Amazon]
0 $406.00
GEMCO ET10 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E010047 Ametek Gemco Brake Shoe Assembly 
For a TM-1035 or ET-10, 10 Inch Diameter Electric Brake 
Part AME-E010047 
Item 14 
2 per brake, sold each 
Premium OEM Non-Asbestos Bonded Lining Material 
aka 635C292G01  
[Amazon] 
(5LBS) H 4" L 10" W 4" Box
0 $677.00
2 AME-E010070 Ametek Gemco Bolt. Brake Shoe Bolt Assembly 
Hardened Bolt with Nut, Lockwasher & Cotter Pin 
For a TM-83, TM-1035 & ET-10 Brake 
2 per brake, sold each 
aka 27D7221H14
- 2 $156.00
3 AME-E010309 Ametek Gemco Tie Rod Assembly for an ET-10 Brake - 1 $376.00
4 AME-E010286 Ametek Gemco Self Adjust Assembly Kit for an ET10 Brake - 0 $1,322.00
5 AME-PSD0146500 Ametek Gemco Repair Kit 
Repair / Seal Kit for a PSD0151705, PSD0148317, PSD0148305 & PSD0175907 
Thruster Assembly. Item 8A 
Seals 04582153 , O'Rings & Bearings, ET8, ET10 / ET-11 1/16 
(2LBS) H 4.00" L 5.00" W 4.00" 
[Amazon]
0 $406.00
6 AME-E010266 Ametek Gemco Spring. Main Spring on a ET-10 Brake - 0 $66.00
7 AME-E010312 Ametek Gemco Pin Kit for an ET-10 Thruster Brake. Includes Base Pins & Top Pins with Retaining Rings - 0 $282.00
GEMCO ET13 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E013194 Ametek Gemco Base for a ET13 Brake Assembly. item 1 - 0 $2,123.00
2 AME-E013025 Ametek Gemco Brake Shoe & Lining 
For a TM1355 or ET13 
13 Inch Diameter Electric Brake  
Item 14 
Qty. 1, 2 per brake but sold each 
Bonded, Premium Non-Asbestos Lining Material 
aka 439C201G01 
(12LBS) H 8" L 12" W 8" Box
- 0 $814.00
3 AME-E013053 Ametek Gemco Bolt 
Hardened Brake Shoe Bolt Assembly 
For TM-1355 DC Brake 
Item 16 
2 per brake, sold each 
aka 24D6387G04
- 2 $235.00
4 AME-PM0139600 Ametek Gemco Arm. Outer Shoe Arm on a ET13 Brake. 1 Pair. Item 4 4/7 - 0 $553.00
5 AME-E013228 Ametek Gemco Tie Rod Assembly for a ETH13EB50 Brake. Item 5 - 1 $424.00
6 AME-E013240 Ametek Gemco Tie Rod. Self Adjust Tie Rod Assembly on a ET-13 Brake with the Self Adjust Option. Item 5A - 0 $1,361.00
7 AME-E013225 Ametek Gemco Arm. Inner Shoe Arm on a ET-13 Brake. 1 Pair. Item 6 - 0 $659.00
8 AME-E013229 Ametek Gemco Force Arm Assembly on a ET-13 Brake. Item 7 - 0 $335.00
9 AME-PSD0146500 Ametek Gemco Repair Kit 
Repair / Seal Kit for a PSD0151705, PSD0148317, PSD0148305 & PSD0175907 
Thruster Assembly. Item 8A 
Seals 04582153 , O'Rings & Bearings, ET8, ET10 / ET-11 1/16 
(2LBS) H 4.00" L 5.00" W 4.00" 
[Amazon]
0 $406.00
10 AME-E013231 Ametek Gemco Pin Kit for a ET-13 Brake. Includes Base Pins and Top Pins with Retaining Rings. Item 10 - 0 $376.00
GEMCO ET16 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E016025 Ametek Gemco Brake Shoe Assembly 
Part AME-E016025 
For a 16 Inch TM-1665 or ET-16 Brake 
Premium Non-Asbestos Material Bonded to the Brake Shoe 
Item 14, 2 per brake, sold each 
aka 635C227G01 
[Amazon] 
(31LBS) H 12" L 10" W 12" Box
0 $1,083.00
2 AME-E016027 Ametek Gemco Bolt. Brake shoe Bolt on a TM1655 & ET-16 Brake.Includes Bolt, Nut & Pin. Ref item 16. 2 per brake, 24D6387G03 (2LBS) 
- 0 $258.00
3 AME-PSD0146500 Ametek Gemco Repair Kit 
Repair / Seal Kit for a PSD0151705, PSD0148317, PSD0148305 & PSD0175907 
Thruster Assembly. Item 8A 
Seals 04582153 , O'Rings & Bearings, ET8, ET10 / ET-11 1/16 
(2LBS) H 4.00" L 5.00" W 4.00" 
[Amazon]
0 $406.00
GEMCO ET19 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E019024 Ametek Gemco Brake Parts 19 Inch 
Brake Shoe & Lining Assembly 
For a 19 Inch TM-1985 or ET-19 Brake 
Premium,Non-Asbestos Lining Material 
Bonded to the Brake Shoe  
Qty. 1, 2 per brake, sold each 
Item 14 
aka 439C394G01 
(45LBS) 1/17
- 2 $1,456.00
2 AME-E019027 Ametek Gemco Brake Shoe Bolt 
For a TM-1985 or ET19 Brake Shoe 
Item # 16, 2 per brake, sold each 
1.25" Dia. X 10.5" L Rod threaded both ends 1 end has pin hole, Nut for use with pin, 1 pin. Nut is on & pinned 
aka 24D6387G01 (5 LBS)
- 0 $367.00
3 AME-PSD0146500 Ametek Gemco Repair Kit 
Repair / Seal Kit for a PSD0151705, PSD0148317, PSD0148305 & PSD0175907 
Thruster Assembly. Item 8A 
Seals 04582153 , O'Rings & Bearings, ET8, ET10 / ET-11 1/16 
(2LBS) H 4.00" L 5.00" W 4.00" 
[Amazon]
0 $406.00
GEMCO ET23 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E023025 Ametek Gemco Brake Shoe & Lining 
For a 13 Inch TM-2311 DC Brake 
Item 14, 2 per brake, sold each 
Premium Bonded, Non-Asbestos Material 
aka 635C316G01 
1/16
- 0 $2,441.00
2 AME-E023028 Ametek Gemco Brake Part TM DC Brakes 
Hardened Brake Shoe Bolt 
For Mounting Brake Shoes 
Includes Bolt Nut & Lockwasher 
For a 23 Inch TM-2311 DC Brake 
Item 16, 2 per Brake, sold each 
aka 24D6387G02 & E023028002 
(12LBS) H 4" L 12" W 4" Box 
1/16
- 0 $518.00
3 AME-PSD0146500 Ametek Gemco Repair Kit 
Repair / Seal Kit for a PSD0151705, PSD0148317, PSD0148305 & PSD0175907 
Thruster Assembly. Item 8A 
Seals 04582153 , O'Rings & Bearings, ET8, ET10 / ET-11 1/16 
(2LBS) H 4.00" L 5.00" W 4.00" 
[Amazon]
0 $406.00
Secure Online Order
 

 
Secure Online Order
 
14,105 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 

Click to visit our Amazon store
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate
 
Frequently Sold
Replacement Parts
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
All BPI web sites
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 Worm Gear RLS
  • 2000 Spur Gear RLS
  • 2000 Heavy Duty RLS
  • 2006 K Type RLS, 2 Circuit
  • 2006 K Type RLS, 4 Circuit
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
  • ECPT10 Pressure Transducer
  • PST360 Pressure Transducer
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
Catrac Cable & Hose Carrier

Catrac
 
Catrac Cable & Hose Carrier Products
 
JLG Replacement Parts
 
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985